• Journal of the Korean Chemical Society
• /
• v.23 no.1
• /
• pp.1-6
• /
• 1979

The dipole moments for square planar and tetrahedral $[M(II)N_2S_2]$ type complexes are calculated, using the expansion method for spherical harmonics [M(II) = Co(II), Ni(II), Cu(II) or Zn(II)]. The calculated values of the dipole moments for these complexes are in the range of the experimental values. The possible structures for these complexes in benzene solution are discussed on the basis of the calculated dipole moments and the the magnetic properties.

• Journal of Magnetics
• /
• v.20 no.2
• /
• pp.110-113
• /
• 2015

Two kinds of magnetic fluids with different volume fractions are symmetrically filled into the W0.9 photonic crystal waveguide structure. The 2D plane-wave expansion method is used to investigate the slow light properties numerically. The constant group index criterion is employed to evaluate the slow light performance. The wavelength bandwidth ${\Delta}{\lambda}$ centering at ${\lambda}_0=1550nm$ varies from 32.4 to 44.2 nm when the magnetic field factor ${\alpha}_{\parallel}$ changes from 0 to 1. And the corresponding normalized delay bandwidth product can be tuned from 0.221 to 0.258. For comparison and optimization, two infiltration cases are investigated and the more advantageous infiltration scheme is found.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.391-397
• /
• 2004

The performance characteristics of partial admission supersonic turbines are analyzed by using the commercial CFD program FLUENT6.0. The governing equations were discretized with Euler implicit method in time and 2nd-order upwind scheme of FVM in space. The k-$\varepsilon$ turbulence model was utilized to describe the turbulent flow field. In order to investigate the nozzle--rotor interactions and the effect of partial admission, the flows in supersonic turbine rotor cascades with a nozzle are computed. Extensive computations of partial admission supersonic turbines provide the shock structures and flow patterns in the nozzle and rotor. It is clearly shown that the nozzle flow is highly affected by the shocks or expansion waves propagated from the rotor leading edge. And the rotor flow is also affected by the shocks or wakes originated from the nozzle.

• Wind and Structures
• /
• v.3 no.4
• /
• pp.221-241
• /
• 2000

Structural dynamics usually applies modal transformation rules aimed at de-coupling and/or minimizing the equations of motion. Proper orthogonal decomposition provides mathematical and conceptual tools to define suitable transformed spaces where a multi-variate and/or multi-dimensional random process is represented as a linear combination of one-variate and one-dimensional uncorrelated processes. Double modal transformation is the joint application of modal analysis and proper orthogonal decomposition applied to the loading process. By adopting this method the structural response is expressed as a double series expansion in which structural and loading mode contributions are superimposed. The simultaneous use of the structural modal truncation, the loading modal truncation and the cross-modal orthogonality property leads to efficient solutions that take into account only a few structural and loading modes. In addition the physical mechanisms of the dynamic response are clarified and interpreted.

• Annual Conference on Human and Language Technology
• /
• 2002.10e
• /
• pp.235-242
• /
• 2002

본 논문은 한영 교차언어 정보검색을 위한 질의 변환 방법과 질의 확장에 대해서 기술하고 있다. 한영 교차언어 정보 검색은 한국어 질의와 관련된 영어 문서를 검색하는 것을 말하며, 한국어 질의를 영어 질의로 변환하는 방법을 사용했다. 이를 위해 한국어 단어들에 대한 영어 대역어들의 공기 정보를 이용하며, 공기 정보로는 상호 정보를 사용했다. 또한 한국어와 영어의 연어 사전을 사용하여 성능을 향상시켰다. 추가적인 검색 성능 향상을 위한 방법으로, 기존 연구에서 많이 사용된 적합성 피드백에 의한 지역적 질의 확장 대신, 영어 워드넷을 확장하여 구축한 한영 이중언어 시소러스를 사용하여 질의 확장을 하는 전역적 질의 확장을 시도하였다. 실험결과, 정확률의 향상보다는 재현율의 향상 정도가 더 컸으며, 긴 질의보다 짧은 질의를 확장한 경우가 성능이 높았다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.6
• /
• pp.1273-1281
• /
• 1988

In this study, the dynamic characteristics of Bellows, used for expansion joint, were investigate by F.E.M. Using the axisymmetric conical frustum element, the natural frequencies, modevectors and the parameters governing the dynamic characteristics of Bellows were also investigated. Through the experiment, it was shown that the results calculated by finite element method and measured experimental values were in good agreement.

• International Journal of Railway
• /
• v.8 no.2
• /
• pp.42-45
• /
• 2015

Alkali-silica reaction (ASR) is a chemical reaction in concrete that alkalis in cement react with reactive silica in aggregate in the presence of water. When ASR takes place, it produces gels that absorb water and expand. Swelling of ASR gels can damage concrete and cause cracking and volume expansion in concrete structure. In this paper, mechanical consequences of ASR on concrete are simulated by a finite element (FE) analysis. An FE model of concrete is built. The evolution of concrete mechanical properties subjected to ASR is achieved by FE analyses. The constitutive model of concrete is attained via the FE analysis. A case study is used to demonstrate the proposed method. The simulated results using the proposed model are in good agreement with the observations of concrete with ASR reported in the literature. The results can be used for a basic research to enhance durability of concrete slab tracks and concrete railway sleepers.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.683-686
• /
• 2004

In recent years, some attention was particularly given to cracking sensitivity of high performance concrete. It has been argued and demonstrated experimentally that such concrete undergoes autogenous shrinkage due to self-desiccation at early age, and, as a result, internal tensile stress may develop, leading to micro cracking and macro cracking. One possible method to reduce cracking due to autogenous shrinkage is the addition of expansive additive. Tests conducted by many researches have shown the beneficial effects of addition of expansive additive for reducing the risk of shrinkage-introduced cracking. However, the research on hydration model of expansion additive has been hardly researched up to now. This paper presents a study of the hydration model of Ettringite-Gypsum type expansive additive. Result of comparing forecast values with experiment value, proposed model is shown to expressible of hydration of expansive additive.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.2
• /
• pp.73-79
• /
• 1987

This paper describes a new algorithm to evaluate the production cost for a generation system including energy-limited hydroelectric plants. The algorithm is based upon the analytical production costing model developed under the assumption of Gaussian probabilistic distribution of random load fluctuations and plant outages. Hydro operation and pumped storage operation have been dealt with in the previous papers using the concept of peak-shaving operation. In this paper, the hydro problem is solved by using a new version of the gradient projection method that treats the upper / lower bounds of variables saparately and uses a specified initial active constraint set. Accuracy and validity of the algorithm are demonstrated by comparing the result with that of the peak-shaving model.

• Journal of the Korean Ceramic Society
• /
• v.11 no.3
• /
• pp.33-38
• /
• 1974

The possibility of the sources for the manufacture of mullite-rich refractories from the modified domestic alunite was studied. The modifying method of alunite studied were performed by calcination, wet ballmilling, and washing with water. For synthesis of mullite-rich refractories, the modified alunite with the addition of alumina and Fe2O3 as mineralizer was fired at 1350$^{\circ}$-155$0^{\circ}C$, and the following results were obtained: 1) The suitable firing temperature range was 1450$^{\circ}$-150$0^{\circ}C$, and adequate amounts of Al2O3 and Fe2O3 were below 30% and 3~4%, respectively. 2) Thermal expansion coefficient proportional to heating temperature was about 5$\times$10-6~10$\times$10-6cm/cm.deg. 3) The mineralogical compositions of the sintered specimens were found as mainly mullite and corundum.