• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.466-473
• /
• 1998

LRV(Light Rail Vehicle) is one of the most useful way for urban transit. HDPIC has designed and manufactured the LRV train set for Manila Line 1 expansion. The LRV is composed of two carbody sections which are coupled by a articulated bogie. The articulated bogie and two motorized bogies have slewing rings in order to improve the curving performance and ride quality. Carbody structures are mainly made of low-carbon stainless steel (STS301L), and the carbody bolsters and draft sills are made of rolled steel for welded structures. The authority's specifications specified the design load conditions and weight limits. Design load conditions are vertical load, compressive load and diagonal jacking, and the maximum axle load is 10.7 ton. In order to meet those requirements, the stiffness and strength of carbody structure were predicted using finite element analysis during design stage. The half or full structure is modeled and analyzed with design load conditions, and critical areas are analysed in detail using sub-modeling method. The strength and strength of carbody structure was also verified by the load test. The analysis and test results show a good agreement.

• Journal of architectural history
• /
• v.7 no.2 s.15
• /
• pp.113-126
• /
• 1998

This study is on the organizational principles of Chinese traditional houses. It has been assumed that a common cultural background did influence dwelling construction in most areas of China, some specific concepts are used to build a connection between the culture and architecture. There are four aspects of cultural influence being explored: traditional concept of space by the philosophical influence, religious influence, the Feng Shut method, and traditional system of family organization. The influence of the Chinese culture on dwelling architecture is predominant. Housing types from different areas of China, despite their different physical appearance, have similar spatial concepts. This cultural influence was due to the historic development of the Chinese empire. The organizational principles of Chinese dwelling architecture determined by its own cultural background have five major invariable norms. They are as follows: 1. Internal and enclosed spatial organization. 2. Grouping of buildings around axes. 3. Spatial organization and extension by courtyard. 4. Spatial expansion by adding units. 5. Hierarchical organization of space.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.24 no.4
• /
• pp.1-8
• /
• 1987

In this paper negative drift forces are discussed, which act on a two-dimensional cylinder exposed to slightly modulated waves in water of finite depth. By combining matched asymptotic expansion method with multiple scale technique, it is clearly shown that the slowly-varying drift force can be negative under certain circumstances: i) Incident waves are irregular or slightly modulated. ii) The water depth is finite compared to the wave length of carrier waves. iii) The gap between the keel of the cylinder and ocean floor is narrow. Then the negative drift forces are caused by the unbalance of hydrostatic force associated with set down. Real fluid and wave breaking effects are not considered.

• The KSFM Journal of Fluid Machinery
• /
• v.10 no.6
• /
• pp.24-31
• /
• 2007

In the present study, the effects of the design factors and operating conditions on flow characteristics of a vane pump for the automotive power steering system has been analyzed numerically. An unsteady moving mesh technique with cell expansion/contraction method is used to simulate the rotation of vanes with respect to stationary inlet and outlet. As a result, the flow characteristics of the flow rate and pressure rise across the vane pump were obtained. The numerical analyses for the various design factors such as number of vanes and thickness between the rotor and camring and for various operating conditions such as rotational speed and pressure difference between inlet and outlet were extensively performed. And the results were discussed in the paper.

• Journal of electromagnetic engineering and science
• /
• v.1 no.1
• /
• pp.11-17
• /
• 2001

In this paper, spherical Luneburg lens antennas have been systematically analyzed using the Eigenfunction Expansion Method (EEM), The developed technique has capability of performing a complete 3-D analysis to characterize the multi-layered dielectric spherical lens with arbitrary permittivity and permeability. This paper describes the analysis technique, and presents the results of the parametric study of Luneburg lens antennas by varying design parameters suoh as the diameter of the lens antenna (up to 80 wavelength), number of spherical shells (up to 30 shells), air-gaps between spherical shells, and dielectric loss of the material. Many representative engineering design curves including the far-field patterns, wide-angle sidelobe characterizations, antenna efficiency have been presented.

• The korean journal of orthodontics
• /
• v.15 no.2
• /
• pp.353-368
• /
• 1985

This present paper describes 3 clinical cases which were treated with Bioprogressive mechanism. Each patient has shown a deficient maxilla combined with prognathic and steep mandible. The purpose of treatment was planned to obtain the forward growth of maxilla and redirectioning of mandibular growth. The most noteworthy approach in the treatment was the application of Cl III intermaxillary elastics with upper protraction utility arch immediately after rapid maxillary expansion. In the analysis of the data obtained from pre- and post treatment lateral cephalogram, the result achieved by this method is very favolable to the correction of anteroposterior relationship of maxilla and mandible.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.1
• /
• pp.21-26
• /
• 2012

In recent years, DC distribution systems are becoming hot issue due to the increase in digital loads and DC generation systems according to the expansion of renewable energy technologies. However, removing the fault current in DC grids is comparably difficult since the current in DC grids has no zero-crossing point like in AC grids. Thus, developing dedicated DC circuit breakers for DC grids is necessary to get safety for people and electrical facilities. This paper proposes magnet arc extinguishing method to develop a 300[$V_{DC}$]/10[A] DC circuit breaker. The performance of the proposed DC circuit breaker was verified by an experimental circuit breaker test system built in this research.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.394-395
• /
• 2018

본 논문에서는, 직류단 1-션트 전류 측정을 이용하는 고속 BLDC 전동기 운전 시스템의 제어 성능 향상 및 전류 측정 영역 확장을 위한 제어 방법을 제안한다. 고속 BLDC 전동기의 PWM 기법과 그에 따른 직류단 1-션트 전류 측정 방법 및 측정 영역을 분석하고, 측정 가능 범위를 수식적으로 정리한다. 제안된 제어 방법은 전류 맥동 감소 및 고속 운전 정밀도 향상에 적합한 PWM 기법과 직류단 1-션트 전류 측정 범위가 넓은 PWM 기법을, 정리된 수식을 바탕으로 운전 영역에 따라 사용하여 제어 성능을 향상 시킨다. 계산 데이터 및 실험 결과를 통해 제안된 방법의 효용성을 확인한다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.193-194
• /
• 2018

In this study, various materials such as epoxy material, urethane material, cement material, and acrylic material are used to solve the water leakage occurring in underground structures. However, in the reality that the durability is insufficient and the effect is insufficient, it is aimed to improve the repairing effect by using acrylics. As a second study, it is confirmed that leachate can be used as a repair material by considering long time under water stability, elongation range test, fatigue resistance test, tube stability test, damage recovery performance ana temperature stability considering leakage environment for polyacrylate. In addition, this material is applied to Expansion Joint to perform leakage repair, and to verify the effect of repairing leakage by monitoring and visual observation of concrete humidification.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.04a
• /
• pp.250-253
• /
• 2004

Emphasis has been placed on thin plate fabrication of plain woven carbon fabric reinforced Al matrix composites using liquid pressing process. The composite has potential applications for PDP rear plate. The process is to use the low pressure for infiltration of Al melt into plain woven carbon fabric as the Al melt is pressurized directly. The minimum pressure required for the infiltration was calculated from force balance equation, permeability measurements and compaction behavior of carbon fiber. Also, the melting temperature and the holding time have been optimized. In order to measure coefficient of thermal expansion (CTE) of the composites, the thermal strain measurement using strain gage was performed and the thermal conductivity of the composites was measured using laser flash method. The constituent materials of the composite are PAN type carbon fibers as reinforcements and 6061 Al alloys as matrices.