• Archives of design research
• /
• v.11 no.3
• /
• pp.149-162
• /
• 1998

This study is what tried to examine the importance of material in industrial design. Then, if planning is to start of product design, the use of material is the last step to complete design. Design material has existed from the time before mankind were born, and the new material which is useful for human beings is developing rapidly. It is no exaggeration to say that our environment is the aggregation of material which was surrounded with us. Then, material has the timely, spatial and cultural feature as well as physical feature. Besides, all sorts of functions of communicating information are being contained in accordance with the character of material. The outside surface of material has the function to develop the sense organ of human beings. This study examines 4 kinds of cultural features in design materials and shown by findings is as follows : Rrst is the technical progressivity to lead new Design form. Second is the symbolic nature to perform the communication function. Third is the sensible attribute to develop surface effect of Design material. Fourth is the future-oriented nature to convince the future such as new material and technology etc. Thus, so as to perform the competitive product design, it is important to grasp the harmony between material and design, structure and processing, and the substantial meaning that the material has and apply them properly, above all. Because the discovery of material will be the measure to forecast future design.

• Science of Emotion and Sensibility
• /
• v.15 no.4
• /
• pp.503-516
• /
• 2012

According to the researches of robot and software agent until now, computational emotion model is dependent on system, so it is hard task that emotion models is separated from existing systems and then recycled into new systems. Therefore, I introduce the Engine of computational Emotion model (shall hereafter appear as EE) to integrate with any robots or agents. This is the engine, ie a software for independent form from inputs and outputs, so the EE is Emotion Generation to control only generation and processing of emotions without both phases of Inputs(Perception) and Outputs(Expression). The EE can be interfaced with any inputs and outputs, and produce emotions from not only emotion itself but also personality and emotions of person. In addition, the EE can be existed in any robot or agent by a kind of software library, or be used as a separate system to communicate. In EE, emotions is the Primary Emotions, ie Joy, Surprise, Disgust, Fear, Sadness, and Anger. It is vector that consist of string and coefficient about emotion, and EE receives this vectors from input interface and then sends its to output interface. In EE, each emotions are connected to lists of emotional experiences, and the lists consisted of string and coefficient of each emotional experiences are used to generate and process emotional states. The emotional experiences are consisted of emotion vocabulary understanding various emotional experiences of human. This study EE is available to use to make interaction products to response the appropriate reaction of human emotions. The significance of the study is on development of a system to induce that person feel that product has your sympathy. Therefore, the EE can help give an efficient service of emotional sympathy to products of HRI, HCI area.

• The Korean Journal of Physiology
• /
• v.5 no.2
• /
• pp.45-54
• /
• 1971

That different mechanisms are involved in the secretory processes by the liver and the kidney of various dyes has been indicated by Sporter (1959), Kim and Hong (1963). Andrews (1958). suggested that a striking difference in the dye-secretory mechanism existed even in the same organ from species to species. Hence, the attempt has been made to study in the rabbit the secretory processes by the live. and the kidney of either phenol red (PSP), bromsulfalein (BSP) or green in the presence of Na-acetate, Na-taurocholate, P-Aminohippurate (PAH) or Benemid. In 37 rabbits, weighing about 2kg., anesthetized with ether, a dye was administered in such 8 manner that the plasma concentration was kept at a relatively constant level throughout the whole experimental period. Hepatic bile sad urine samples were quantitatively collected through the canulae which were previously inserted into the common bile duct (with the cystic duct ligated) and the urinary bladder, respectively, while arterial samples were taken from a femoral artery. After 50 min from the onset of dye administration, these samples were obtained every 10 mit for a period of 40 min. This was followed by the administration of either Na-acetate, Na-tauro-cholate, PAH or Benemid with a repetition of the same sample collecting procedures just stated. The results may be summarized as follows: 1) Na·acetate augmented urinary clearance of PSP by nearly 300 per cent, but lowered urinary BSP clearance by about 50 per cent. It enhanced biliary BSP clearance by 40% and had no effect on biliary psp clearance. 2) Na-taurocholate lowered biliary and urinary clearance of PSP by 10 per cent and 30 per cent respectively, and had no effect on both biliary and urinary clearance of BSP. 3) PAH lowered both biliary and urinary excretion of BSP and PSP, while it lowered the biliary excretion of indocyanine green which was excreted only in the bile. 4) Benemid suppressed BSP excretion by the liver and the kidney. 5) raper chromatographic analysis of PSP and of BSP in the bile and urine samples gave the following results: a) PSP Ivas excreted in the urine and bile only in free forms, and no modification in the excretory pattern was brought about by Na-taurocholate. b) BSP was excreted in the urine in 4 different conjugated froms and in the bile in both 3 different conjugated forms and in a free form. Na-taurocholate modified the excretory pattern of the urinary BSP.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.12
• /
• pp.801-809
• /
• 2012

Long-term measurement of total mercury (TM) and dissolved gaseous mercury (DGM) were performed in Yangsuri marsh. Average TM and DGM concentrations were $2.0{\pm}2.0$ ng/L and $15.0{\pm}2.8$ pg/L, respectively, indicating that only 2.6% of TM existed as the form of DGM in Yangsuri marsh. While TM did not show the seasonal variation a statistically high DGM concentration was observed in warm season, indicating that DGM was effectively produced by strong solar radiation and high water temperature. There was no relationship between TM and DGM concentrations in Yangsuri marsh, as observed in other studies. DGM in Yangsuri marsh was supersaturated for most of sampling period; therefore, one can conclude that $Hg^0$ in water surface can readily volatilize to the atmosphere.

• Spatial Information Research
• /
• v.22 no.2
• /
• pp.53-62
• /
• 2014

The floor field model is the micro pedestrian model based on a cellular automata for modeling pedestrian movement in the interior space using the static and dynamic floor field. It regards a form of pedestrian as square but the actual pedestrian's shape and size are similar to ellipsoid or rectangle. Because of this, we are difficult to give a rotation effect to pedestrians and there is a limit to reflect an impact of clogging and jamming. Also, this model is not able to reflect an impact of a posture and visibility effectively in the pedestrian movement. In this study, we suggest the improved pedestrian model incorporating the actual shape and size of pedestrian. The pedestrian's shape is defined not square but rectangle which is close to the actual body size of Korean. Also, we define the model which is able to represent the impact of clogging and jamming between pedestrians by adding the pedestrian's posture. We develop the simulator for testing the suggested model and study the difference between two models by comparing a number of effects. As a result, we could confirm solving the problem with dynamic value in the existed model and reflecting the panic effect in evacuation situation.

• Journal of Environmental Health Sciences
• /
• v.37 no.1
• /
• pp.29-43
• /
• 2011

The seasonal characteristics of atmospheric particulate matter (PM) were evaluated through the measurement of $PM_{10}$ (particles with an aerodynamic diameter of less than 10 ${\mu}m$) and $PM_{2.5}$ (particles with an aerodynamic diameter of less than 2.5 ${\mu}m$) collected in the downtown area of Iksan city over roughly two weeks in each season of 2004. During the sampling period, 54 samples of $PM_{10}$ and $PM_{2.5}$ were collected and then measured for mass concentrations of PM and its water-soluble inorganic ion species. The concentrations of $PM_{10}$ and $PM_{2.5}$ were highly variable on a daily time scale in all seasons, especially in fall. Annual concentrations of $PM_{10}$ and $PM_{2.5}$ were $54.7{\pm}21.6\;{\mu}g/m^3$ and $34.0{\pm}13.4\;{\mu}g/m^3$, respectively. The daily concentrations of the analyzed ions similarly showed a pronounced variation, although a difference between seasons existed. Among them, $SO_4^{2-}$, $NO_3^-$ and $NH_4^+$ were the most abundant ions in all seasons, contributing up to 32% of $PM_{10}$ and 39% of $PM_{2.5}$. The contribution of $SO_4^{2-}$ and $NO_3^-$ showed a seasonal variation, as $SO_4^{2-}$ was the highest during spring and summer and $NO_3^-$ was the highest during fall and winter. Non-seasalt $SO_4^{2-}$ and $NO_3^-$ were found to exist mainly as neutralized chemical components of $(NH_4)_2SO_4$ and $NH_4NO_3$ due to the high concentration of $NH_4^+$ in PM samples, which were a major form of airborne PM in all seasons. Seasonal characteristics of $PM_{10}$ and $PM_{2.5}$ in Iksan were described in relation to the temporal variations of daily concentration of PM and its inorganic ion species including inter-particle reactions.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.11
• /
• pp.923-932
• /
• 2002

A stoichiometric mixture of evaporating materials for CdIn$\_$2/S$\_$4/ single crystal thin films was prepared from horizontal furnace. To obtain the single crystal thin films, CdIn$\_$2/S$\_$4/ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by hot wall epitaxy(HWE) system. The source and substrate temperatures were 630 $\^{C}$ and 420 $\^{C}$, respectively. The crystalline structure of single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction(DCXD). The carrier density and mobility of CdIn$\_$2/S$\_$4/ single crystal thin films measured from Hall effect by van der Pauw method are 9.01$\times$10$\^$16/ cm$\^$-3/ and 219 ㎠/V$.$s at 293 K, respectively. From the optical absorption measurement, the temperature dependence of energy band gap on CdIn$\_$2/S$\_$4/ single crystal thin films was found to be Eg(T) ＝ 2.7116 eV - (7.74 $\times$ 10$\^$-4/ eV) T$\^$2//(T＋434). After the as-grown CdIn$\_$2/S$\_$4/ single crystal thin films was annealed in Cd-, S-, and In-atmospheres, the origin of point defects of CdIn$\_$2/S$\_$4/ single crystal thin films has been investigated by the photoluminescence(PL) at 10 K. The native defects of V$\_$cd/, V$\_$s/, Cd$\_$int/ and S$\_$int/ obtained by PL measurements were classified as donors or accepters type. And we concluded that the heat-treatment in the S-atmosphere converted CdIn$\_$2/S$\_$4/ single crystal thin films to an optical p-type. Also, we confirmed that In in CdIn$\_$2/S$\_$4/GaAs did not from the native defects because In in CdIn$\_$2/S$\_$4/ single crystal thin films existed in the form of stable bonds.

• Archives of design research
• /
• v.17 no.4
• /
• pp.169-176
• /
• 2004

It is incontestable that the essence of the current fever of well-being is pseudo-ideology, which is the commercialized well-being. Nevertheless, the potential value as the cultural contests of Korean Design, reaching the philosophy of well-being, must not be overlooked. Being more than its dictionary meaning of 'happiness' and 'welfare', well-being aims peace of mind and richness in mentality, thus supports the life style of 'Body-Mind Monism'. As a trend that has taken a ride on the consumerism, it is inevitable to excavate the benign cultural value that an ordinary sign of well-being lacks in order to create a peculiar model of Korea's design contents by sublimating the commodity aesthetic of well-being into an alternative argument possessing the cultural identity of Korea. Well-being, not much different form an attitude of following the 'ways of nature', is a typical model of non-dualistic thinking of East Asia. By tracing back to the indication of well-being that already existed in the non-dualistic thought and design of East Asia, the genealogy connecting the current phenomena of well-being to the Body-Mind Monism can be found in the cultural traditions of as close as Korea and as far as East Asia. In the case of adopting the monistic way of East Asian thinking that sees body and mind as one not two as the theoretical background of well-being imported fro the West, it is expected to provide a solution for the design discourse of Korea to be out of colonialism. Well-being contributes to the monistic awareness in the period of self-reflected modernization, which needs to search new values based on the reconsideration of dualistic paradigm centered on the Western culture, thus it is worth putting anticipation on the potential significance well-being would have in the field of national as well as international design world.

• Korean Chemical Engineering Research
• /
• v.45 no.5
• /
• pp.433-441
• /
• 2007

This work investigated the stability of a Sn-modified Pt electrode, which was used for reduction of nitrate, fabricated by an adsorption or electro-deposition of Sn on Pt. In order to find the causes for instability of the electrode, the effects of the solutions in which the electrode was used and the potential applied to the electrode on the electrochemical and metallurgical behaviors of Sn on Pt were studied. The Sn of freshly- prepared modified-Sn Pt electrode existed as Sn hydroxide form, which brought about an easy loss of the electro-activity of the electrode even staying in water, especially in acid solution. When the Sn-modified Pt electrode was used for the reduction of nitrate, the electro-activity of the electrode was affected depending on the potential applied to the electrode. When a more negative potential than the redox equilibrium potential between $Sn(OH)_2$ and Sn was applied to the electrode, the Sn hydroxide was converted to Sn that could diffused into Pt, which leaded to the loss of electro-activity of the electrode as well. The solid diffusion of Sn increased linearly with the applied potential. The Sn-electrodeposited Pt electrode which had more Sn on the electrode was more favorable to maintaining the integrity of the electrode during the reduction of nitrate than the Sn-adsorbed Pt electrode prepared in the under-potential deposition way.

• Journal of Korean Society of Rural Planning
• /
• v.19 no.4
• /
• pp.81-93
• /
• 2013

The selection of land for fishing village development project, and the standard used to classify fishing villages has been determined based on the guidelines developed by fishing village cooperatives. The approach fishing village cooperatives follows is likely to classify fishing villages without first reflecting on the overall development environment of the region, such as other industries and workers in the area. It also acts as a barrier for business promotion or evaluation, because the cooperatives do not match the administrative districts, which are the units of administration, and the main policy enforcement agent in regional development. Against this background, this study aimed to identify categories to situate the development direction, as well as the size and distribution of fishing villages based on eup, myeon, and dong administrative units as defined by the Fishing Villages and Fishery Harbors Act. This study was based on the Census of Agriculture, Forestry, and Fisheries of 2010, and analyzed 826 eups, myeon, and dongs with fishery households using the principal component analysis, and 2-Step cluster analysis methods. Therefore, 95% of the variance was explained using the covariance matrix for types of fishing villages, but it was analyzed as one component focusing on the number and ratio of fishery households, and used the cluster-type analysis, which focused on the sizes of fishing villages. The clusters were categorized into three types: (1) the development type based on the number of fishermen in the eups, myeons and dongs was analyzed as village size (682); (2) administrative district size (121); and (3) total eups, myeons and dongs (23), which revealed that the size of most fishing villages was small. We could explain 73% of the variance using the correlation coefficient matrix, which was divided into three types according to the three principal component scores, namely fishery household power, fishery industry power, and fishing village tourism power. Most fishing villages did not have a clear development direction because all business areas within the region were diversified, and 552 regions could be categorized under the harmonious development type, which is in need of balanced development. The fishery industry type typified by industrial strength included 159 regions in need of an approach based on industrialization of fishery product processing. Specialized production areas, which specialized in producing fishery products, were 115 regions with a high percentage of fishermen. The analysis results indicated that various situations in terms of size and development of fishing villages existed. However, because several regions exist in the form of small village units, it was necessary to approach the project in a manner that directed the diversification of regional development projects, such as places for local residents to relax or enjoy tourism experiences within the region, while considering the overall conditions of the relevant eups, myeons, and dongs. Reinforcement of individual support for fishermen based on the Fisheries Act must take precedence over providing support for fishermen through regional development. In addition, it is necessary to approach the development of fishing villages by focusing on industrializing the processing techniques of fishery products. Areas specialized in the production of fishery products are required to consider the facilities for fisheries production, and must make efforts to increase fishery resources, such as releasing fry.