• Journal of information and communication convergence engineering
• /
• 제9권2호
• /
• pp.129-134
• /
• 2011

Nowadays, most of exhibits are material antiquities while the exhibit of intangible cultural heritage is deficient and the form is less advanced which cannot meet the exhibition needs of digital times. This has resulted in insufficient display of intangible heritage's value which may not facilitate inherit and protection of intangible heritage, no other than protection mechanism of forming healthy industrialization. This article has established digital exhibition mode in museum about intangible cultural heritage by analysis on current museum and using mobile communication and augmented reality techniques. Discuss the mode in the layer integrating creative industry and mobile industry and provide practicable reference project of forming the healthy industrialization mechanism for protecting intangible heritage.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1322-1327
• /
• 2005

This paper presents a single-stage ZVT full-bridge AC/DC converter for aerospace applications. The detailed operating principle and design consideration of this soft-switched converter are analyzed and described. The proposed circuit topology and control scheme are proposed to exhibit optimum performances (i.e. high power factor, high efficiency, ring-free and low EMI features). A laboratory prototype, 500W 5V/100A AC/DC converter was implemented. The simulation and experimental waveforms verify the feasibility of the proposed design.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.114-117
• /
• 2006

Concrete beams reinforced with fiber reinforced polymer (FRP) bars exhibit large deflection and crack width as compared to concrete beams reinforced steel due to modulus of elasticity of FRP bars. Current design code for prediction and crack width developed in concrete structures reinforced with steel bars may not be used for concrete beams reinforced with FRP bars. Thus a number of researcher have attempted to propose modifications to the ACI 318 empirical equation for estimating the effective moment of inertia of reinforced concrete beams. Others used numerical method to calculate the deflection. The purpose of this paper is to evaluation of methods of ACI 440.1 R-01, ISIS Canada design manual, and others for predicting deflection for glass fiber reinforced polymer reinforced concrete beams.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.127-131
• /
• 2008

This paper deals with the performance evaluation of piezoelectric unimorph actuator. In the unimorph design, the thickness ratio of substrate to piezoelectric material and the elastic modulus ratio of substrate to piezoelectric material are important parameters. There exists only one structural configuration that satisfies the optimal condition among them, and actuators using that configuration exhibit better actuating displacements. Another design parameter is the piezoelectric coefficient which can be improved due to the induced tensile stress and voltages. The application of the tensile stress to the piezoelectric material makes it get higher piezoelectric coefficient and the total displacement performance of the unimorph actuator is improved. Finally, the piezoelectric actuator system with spring elements is fabricated and it shows higher actuating displacement capability.

• International Journal of Concrete Structures and Materials
• /
• 제18권3E호
• /
• pp.207-211
• /
• 2006

This paper presents an experimental study on the repair performance of sprayed engineered cementitious composites(ECC) serving as a repair material. Sprayable ECC, which exhibit tensile strain-hardening behavior in the hardened state and maintain sprayable properties in the fresh state, have been developed by using a parallel control of micromechanical design and rheological process design. The effectiveness of sprayable ECC in providing durable repaired structures was assessed by spraying the ECC and testing them for the assessment. The experimental results revealed that, when sprayed ECC were used as a repair material, both load carrying capacity and ductility represented by the deformation capacity at peak load of the repaired flexural beams were obviously increased compared to those of commercial prepackaged mortar(PM) repaired beams. The significant enhancement in the energy absorption capacity and tight crack width control of the ECC repair system treated with wet-mix spraying process suggests that sprayed ECC can be effective in extending the service life of rehabilitated infrastructures.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 1999년도 춘계학술발표대회 논문집
• /
• pp.7-10
• /
• 1999

The organization of modern society is suddenly changing from the modern society to the ultra modern informationalized society. Various social members must satisfy cultural and artistic desires to serve museum concept and function to move the informationalized society. A lot of natural history museum in the world build cyber space exhibition lines. Audiences do not directly visit but they view but they view the exhibit, get an education, participate in the cultrue programs and earn the museum's informations. Especially, in the case of national and public museums in Korea, they do not concerned the museum architecture before processing the character and collections of the museum. Cyber museums determine museum character, policy, information, collections converge of opinion voluntary collection and grasp of location, because cyber museum can be finished be4fore the work of the future museum.

• 한국통신학회논문지
• /
• 제14권4호
• /
• pp.307-320
• /
• 1989

본 논문은 모재 제작을 위한 Modified Chemical Vapor Deposition(MCVD) 장치의 새로운 설계를 제안하였다. MCVD 공정의 기본 장치로는 선반장치와 원료가스공급 장치가 포함되고, 언덕형 광섬유 설계, 공정의 특성 및 MCVD 모재의 굴정율 형태를 측정하는 실험장치를 각기 실현하였다. 연구결과, 중심부 딥(dip)이나 범프(bump) 가 보이지 않는 이상적 언덕형 굴절율 광섬유 모재를 얻었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1969-1971
• /
• 2002

This paper presents the design and performance of low pull-in voltage MEMS switches for commercial cellular/PCS applications. The switches have all-metal (3 ${\mu}m$ thick Au) movable plates over CPW(Coplanar Waveguide) transmission line. The stress gradient in a movable plate is considered in mechanical design to obtain an accurate pull-in voltage. Series metal-to-metal contact switches are fabricated and evaluated. Those switches exhibit the low loss(<0.2 dB @1.9 GHz) with good isolation(55 dB @1.9 GHz).

• 한국항공우주학회지
• /
• 제40권4호
• /
• pp.273-284
• /
• 2012

본 논문에서는 고속의 압축성 유동에 대한 에어포일 형상 설계에 대한 연구를 기술하였다. 새로운 에어포일의 설계를 위하여 기존의 에어포일을 조사하여 이들을 기하학적으로 보간하여 새로운 에어포일들을 생성하였다. 이들 에어포일들에 최적화 기법을 적용하여 공력 성능을 최적화하였다. 본 연구를 통하여 기하학적 보간과 최적화를 통해 우수한 공력 성능을 보이는 에어포일의 설계가 가능함을 보일 수 있었다.

• 한국통신학회논문지
• /
• 제14권2호
• /
• pp.146-154
• /
• 1989

비대칭2선 마이크로스트립선으로 구성된 DC블록(비대칭 DC블록)을 GaAs FET의 입력과 출력측에 사용하여 임피던스 정합을 시키는 새로운 증폭기 설계방법을 제시하였다. 중심파수 4(GHz)에 대하여 대칭이 되는 주파수특성을 얻을 수 있었다. 비대칭 DC블록은 \ulcorner케패시터의 DC블록의 역할뿐만 아니라 임피던스 정합도 할 수 있다는 큰 장점으로 MC 및 MMIC 용으로 사용 가능하다.