• Nuclear Engineering and Technology
• /
• v.41 no.7
• /
• pp.953-968
• /
• 2009

It is important to accurately predict the temperature and density distributions in large stratified enclosures both for design optimization and accident analysis. Current reactor system analysis codes only provide lumped-volume based models that can give very approximate results. Previous scaling analysis has shown that stratified mixing processes in large stably stratified enclosures can be described using one-dimensional differential equations, with the vertical transport by jets modeled using integral techniques. This allows very large reductions in computational effort compared to three-dimensional CFD simulation. The BMIX++ (Berkeley mechanistic MIXing code in C++) code was developed to implement such ideas. This paper summarizes major models for the BMIX++ code, presents the two-plume mixing experiment simulation as one validation example, and describes the codes' application to the liquid salt buffer pool system in the AHTR (Advanced High Temperature Reactor) design. Three design options have been simulated and they exhibit significantly different stratification patterns. One of design options shows the mildest thermal stratification and is identified as the best design option. This application shows that the BMIX++ code has capability to provide the reactor designers with insights to understand complex mixing behavior with mechanistic methods. Similar analysis is possible for liquid-metal cooled reactors.

• Applied Chemistry for Engineering
• /
• v.34 no.4
• /
• pp.455-459
• /
• 2023

Three different optimization studies were conducted for the synthesis of MIL-100(Fe) and MIL-100(Fe)@COF using design of experiments. In the first study, the optimal concentration of precursors was determined using a mixture design method, and a modified molar ratio of 0.4155:0.2664:0.3182 was found to yield the highest crystallinity. In the second study, a central composite design was used to optimize the main factors of synthesis temperature and time with a synthesis temperature of 161℃ and a synthesis time of 12 hours. In the third study, a screening design method was used to determine the effect of five precursors on the formation of MIL-100(Fe)@COF, and the presence of characteristic peaks at 1552, 1483, and 1354 cm^-1 was found to be important for the existence of the COF structure. MIL-100(Fe)@COF synthesized with a modified molar ratio of 0.4831:0.4169:0.1 was predicted to exhibit optimal conditions.

• Journal of Integrative Natural Science
• /
• v.7 no.3
• /
• pp.159-165
• /
• 2014

Pyrazole, hydroxyimino, aldehyde and isoxazole derivatives exhibit a broad spectrum of biological activities such as antimicrobial, anti-inflammatory and antitumor activities. With growing application on their synthesis and bioactivity, chemists and biologists in recent years have considerable attention on the research of these derivatives. In the view of potential importance of these derivatives, we have crystallized few of the derivatives and its report has been published. The present study focuses on docking studies of these derivatives against Phospholipases $A_2$ enzyme. This enzymes has implicated as potential targets for anti-inflammatory drug design. co-crystal structure (PDB ID: 1POE) of $PLA_2$ deposited in Protein Data Bank has been retrieved for docking analysis. Docking studies using Schrodinger's GLIDE reveals that these derivatives shows better binding energy and score in the defined active site. These results may provide a guiding role to design a lead molecule which may reduce inflamation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.389.1-389.1
• /
• 2016

The flexible solid state device has been widely studied as portable and wearable device applications such as display, sensor and curved circuits. A zero-bias operation without any external power consumption is a highly-demanding feature of semiconductor devices, including optical communication, environment monitoring and digital imaging applications. Moreover, the flexibility of device would give the degree of freedom of transparent electronics. Functional and transparent abrupt p/n junction device has been realized by combining of p-type NiO and n-type ZnO metal oxide semiconductors. The use of a plastic polyethylene terephthalate (PET) film substrate spontaneously allows the flexible feature of the devices. The functional design of p-NiO/n-ZnO metal oxide device provides a high rectifying ratio of 189 to ensure the quality junction quality. This all transparent metal oxide device can be operated without external power supply. The flexible p-NiO/n-ZnO device exhibit substantial photodetection performances of quick response time of $68{\mu}s$. We may suggest an efficient design scheme of flexible and functional metal oxide-based transparent electronics.

• Korean Institute of Interior Design Journal
• /
• v.25 no.1
• /
• pp.65-72
• /
• 2016

In allowing visitors to manipulate objects or models with their hands, science museums can become informal education institutions. However, little research has been conducted analyzing the specific interactions of visitors at museums and the effects that specific characteristics of interactive exhibit have on visitors. This research classified exhibits according to the three characteristics: the presentation of concepts, interaction with exhibits and concept levels. Further, relationships among engagement behaviors, visitors'attraction to exhibits, and the holding power of exhibits were analyzed. Using the three characteristics, 55 exhibits were classified into five styles. The results suggest that intriguing content and novel interfaces, maximizing information on science and technology, should be developed for the educational purpose of encouraging visitors to engage in active learning with interactive exhibits. The results of this study provide useful data that planners, designers, and instructors of science museums can use to maximize visitors' participatory learning and interactions.

• Transactions of Materials Processing
• /
• v.21 no.3
• /
• pp.186-194
• /
• 2012

Hot stamping is a forming method that offers various advantages such as superior mechanical properties, good formability, and very small springback. However, relatively large-sized parts, such as front pillars, exhibit poor formability when hot stamped due to the limited material flow and thickness reduction imparted by the process. This reduction in thickness can also lead to cracks. One of the reasons is the relatively high friction between the sheet and the die. In this study, in order to obtain the optimal conditions for hot stamping of front pillars, various process parameters were studied and analyzed using the sheet forming software, J-STAMP. The effects of various parameters such as the die structure, blank shape, blank holding force, punch speed, clearance(upper and lower dies) and distance block were analyzed and compared.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.40-43
• /
• 2004

A new design method for prestressed concrete girder is proposed in this study, which steps for manufacturing are; (1) the bottom part of concrete girder is placed and pretensioned by the first post-tensioning performed on the tendons located in the bottom part of concrete girder, and (2) the next step which consists of concrete placing and post-tensioning operation is followed by the previous step if required. This indicates that sufficient compressive stress can be effectively introduced at the bottom face in stepwise manner, when compared to conventional PSC girder. Two specimens are prepared and tested to investigate the short-term behavior of the PSC girders manufactured by the proposed method. Section Analysis results exhibit good agreements with the test results in terms of strain distribution across the girder section. In addition, flexural strength obtained from the tests is found to be similar to the expected based on Code(Korea). These demonstrate that the method proposed in this study is applicable to the design of PSC girders.

• Korean Institute of Interior Design Journal
• /
• v.15 no.5 s.58
• /
• pp.112-119
• /
• 2006

This study intends to understand the visual experience of architectural space generated by users' movement based on the interpretation of visual properties. An analytic theory of Isovist is suggested for the objective and comparable measurement for such visual experience, and a computer program for the analysis has been proposed as well. By using the analytical theory and computer program, eight houses designed by Adolf Loos and Le Corbusler are analyzed for the purpose of understanding the visual characteristics of the Modern Architecture and the contemporaries. The result shows that, while the architectural space of Loos emphasizes personal privacy as for being livable spaces, the architectural space of Corbusier emphasizes users' movement as for including diverse visual arrays. These commensurable results exhibit that the analytical tool and research frame suggested in this study can be a competitive tool for such analysis.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2003.05a
• /
• pp.123-126
• /
• 2003

Internationally, Korean people and society are known to be workaholic, however, recently some changes have come with the inauguration of the 5 working-days system as well as the rising of economic power and high level of education. Many people come to enjoy leisure time with various activities. Especially, arts become the subject of concern as a kind of leisure life, and also gallery become a important space. However, the renovation of the gallery space is required Inevitably because many galleries have been located in too formal or fixed building space, and the management of it has not been executed thoroughly. This study aims at the suggestion of the specialized and differentiated renovation plan for gallery as cultural space offering the right notion and information about the arts as well as rest to citizens, also as exhibit space showing the object efficiently.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.6
• /
• pp.759-766
• /
• 2003

The amount of container freight continuously has been increased. and the low efficiency of container crane causes jamming frequently in transportation and cargo handling at port. The conventional control techniques based on a mathematical model are not well suited for dealing with ill-defined and uncertain systems. Recently. Fuzzy control has been successfully applied to a wide variety of practical problems as robots. automatic train operation system. etc. In this paper. a fuzzy controller for container crane is proposed to accomplish a design of improved control system for minimizing the swing motion at destination. In this scheme a mathematical model for the system is obtained in state space form. Finally. to exhibit the tracking performance and robustness of the proposed controller. computer simulations were carried out with various references, parameter variations and disturbances.