• The Korean Journal of Ecology
• /
• v.21 no.6
• /
• pp.779-789
• /
• 1998

The forest vegetation established on Mt. Hwangryung located in Pusan, southern Korea was analyzed through phytosociological procedure. Vegetation of the study area was categorized into 14 communities, 16 groups, and 13 subgroups. Vegetation units obtained from such an analysis were shown in a detailed vegetation map (scale 1:5,000). Ecological characteristics of each vegetation unit were discussed on the basis of the principle of restoration ecology. From those results, it was confirmed that some introduced vegetation under excessive artificial interference was in unstable state and then ecological restoration was needed. On the other hand, ecological information and management systems to maintain the urban forest as ecologically healthy state were developed using GIS.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.8
• /
• pp.815-821
• /
• 2009

Information processing in variable and noisy environments is usually accomplished by means of adaptive filters. Among various adaptive algorithms, Least Mean Square (LMS) has become the most popular for its robustness, good tracking capabilities and simplicity, both in terms of computational load and easiness of implementation. In practical application of the LMS algorithm, the most important key parameter is the Step Size. As is well known, if the Step Size is large, the convergence rate of the algorithm will be rapid, but the steady state mean square error (MSE) will increase. On the other hand, if the Step Size is small, the steady state MSE will be small, but the convergence rate will be slow. Many researches have been proposed to alleviate this drawback by using a variable Step Size. In this paper, a new variable Step Size LMS(VSSLMS) called Categorized VSSLMS (CVSSLMS) is proposed. CVSSLMS updates the Step Size by categorizing the current status of the gradient, hence significantly improves the convergence rate. The performance of the proposed algorithm was verified from the view point of convergence rate, Excessive Mean Square Error(EMSE), and complexity through experiments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.9
• /
• pp.1688-1695
• /
• 2016

Underwater communication has multipath error because of reflection by sea-level and sea-bottom. The multipath of underwater channel causes signal distortion and error floor. The excessive multipath encountered in underwater communication channel creates inter symbol interference, which is a limiting factor to achieve a high data rate and bit error rate performance. Therefore, to increase throughput efficiency and improve performance, this paper consider FTN (Faster-than-Nyquist) signalling based on turbo equalization. FTN signalling is a technique of transmitting information at a rate higher than the allowed Nyquist limit. This paper presented efficient decoder structure of FTN transmission in the environment of multipath underwater channel and we compare the performance between FTN method and conventional punctured method in lake experimentation. As a results of lake experiment, we confirmed FTN method based on turbo equalization is applicable and efficiency in underwater communication.

• The Journal of the Korea Contents Association
• /
• v.6 no.10
• /
• pp.107-113
• /
• 2006

Error Concealment method for Intra frames in H.264 reconstructs the lost block by computing weighted average value of the boundary pixels of the neighboring blocks; up, bottom, left and right blocks. However a simple average of pixel values of the neighboring blocks for Intra frames in H.264 leads to excessive blurring and degrades the picture quality severely. To solve this problem, in this paper we estimate the dominant edge of lost block using the pixel values of the neighboring blocks and reconstruct the pixel values by choosing adaptive interpolation between directional interpolation and weighted average interpolation considering the result value of the interference function based on statistics. Finally directional interpolation method improves by determining the dominant edge direction considering the relation of the dominent edge and the edges of neighboring blocks. Experiments show improvement of picture quality of about $0.5{\sim}2.0dB$ compared with the method of H.264.

• Korean Journal of Human Ecology
• /
• v.20 no.6
• /
• pp.1093-1107
• /
• 2011

The purpose of this study was to examine the effect of stress types and coping styles on the relationship quality with mothers-in-law perceived by sons-in-law. The data was collected from 300 sons-in-law aged 20~49 by using a survey questionnaire. The main results of this study were as follows: first, factor analysis yielded 4 types of coping(cognitive understanding coping, avoidant coping, direct behavior coping, and indirect behavior coping) and 7 types of stress(despising poor ability and condition, interference in daily life, son-in-law discrimination, wife discrimination, uncomfortable interaction, differences in lifestyle, and excessive demand). Second, the total stress perceived by sons-in-law in the relationship with their mothers-in-law was affected by avoidant coping and cognitive understanding coping. Finally, the relationship quality between mothers-in-law and sons-in-law was influenced by avoidant coping, uncomfortable interaction stress, direct behavior coping, differences in lifestyle stress, son-in-law discrimination stress, interference in daily life stress, frequency of meeting, cognitive understanding coping, indirect behavior coping, and age. Consequently, it was confirmed that sons-in-law's coping styles with stress from their mothers-in-law was more influential than the amount of stress perceived by sons-in-law on the relationship quality with their mothers-in-law. Especially, 'avoidant coping' among 4 styles of coping and 'uncomfortable interaction stress' among 7 types of stress influenced the relationship quality between mothers-in-law and sons-in-law the most.

• Journal of Environmental Impact Assessment
• /
• v.9 no.4
• /
• pp.291-300
• /
• 2000

Juam lake is a major water reservoir for the industrial and agricultural activities as well as the residental life of Kwangju and Chonnam regions. However, the water quality of the lake is getting worse due to a large quantity inflowing to the lake. The excessive growth of algae by the overfertilization may result in water treatment problems and also the interference with desirable water uses of navigation, aesthetics, recreation, and aquatic ecosystem. Thus the purpose of this study is to investigate the species and their amount of planktons in the lake and the relationship between the P loading amount and the chlorophyll-a used as a primary productivity index. The results of the investigation show that (1) the predominant species of algae are Microcystis aeruginosa, Anabaena affinis, Melosira granulata, Synedra acus, and Coelastrum cambricum, (2) the trophic state of the lake can be classified as eutrophic, and (3) there is close relation between the P loading amount and the chlorophyll-a.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.3
• /
• pp.83-87
• /
• 2012

Computational Fluid Dynamics (CFD) method has been used to investigate the axial force of automotive water pump. As the excessive axial force can make some unexpected problems like impeller interference and coolant leakage we have focused on finding the cause of axial force and its reduction in this paper. First, we have tested the closed type water pump with and without balance hole by the calculation methods. By examining the pressure contour around the impeller, we have found that the axial force arises not only from the pressure difference around shroud but also from the pressure difference around hub. So we have tested two impellers - one is normal open type impeller and the other is open type impeller with modified hub. The results show that the axial force reduction is about 150~200N for normal one and 700N@3000RPM for modified impeller. And the hydraulic efficiency which is important in aspect of engine fuel efficiency is reduced about 6.5% for normal one but increased 4%@3000RPM for modified impeller.

• Journal of Environmental Impact Assessment
• /
• v.8 no.4
• /
• pp.37-45
• /
• 1999

Juam Lake is a major water resource for the industrial and agricultural activities as well as for the resident life of Kwangju and Chonnam regions. However, the water quality of the lake is getting worse due to a large quantity of pollutant inflowing to the lake. The excessive growth of algae by the overfertilization may result in water treatment problems and also the interference with desirable water uses of navigation, aesthetics, recreation and fish maintenance. Therefore, the purpose of this study is to analyze algal species and movements in Juam Lake in order to use as basic data in making the countermeasure to achieve the water quality goal of the lake. The results of the analysis show that (1) the predominant species of algae are Microcystis aeruginosa, Anabaena affinis, Melosira granulata, Synedra acus, and Coelastrum cambricum, (2) their groups are changed in order of diatoms, green algae, and blue-green algae with the lapse of time, and (3) the distance of the vertical movements of algae for 24 hours is about 2m.

• Smart Structures and Systems
• /
• v.14 no.5
• /
• pp.765-784
• /
• 2014

In comparison with conventional shape memory actuated structures, antagonistic shape memory alloy (SMA) actuators permits a fully reversible two-way response and higher response frequency. However, excessive internal stress could adversely reduce the stroke of the actuators under repeated use. The two-way shape memory effect might further decrease the range of the recovered strain under actuation of an antagonistic SMA actuator unless additional components (e.g., spring and stopper) are added to regain the overall actuation capability. In this paper, the performance of all four possible types of SMA actuation schemes is investigated in detail with emphasis on five key properties: recovered strain, cyclic degradation, response frequency, self-sensing control accuracy, and controllable maximum output. The testing parameters are chosen based on the maximization of recovered strain. Three types of these actuators are antagonistic SMA actuators, which drive with two active SMA wires in two directions. The antagonistic SMA actuator with an additional pair of springs exhibits wider displacement range, more stable performance under reuse, and faster response, although accurate control cannot be maintained under force interference. With two additional stoppers to prevent the over stretch of the spring, the results showed that the proposed structure could achieve significant improvement on all five properties. It can be concluded that, the last type actuator scheme with additional spring and stopper provide much better applicability than the other three in most conditions. The results of the performance analysis of all four SMA actuators could provide a solid basis for the practical design of SMA actuators.

• Journal of the Optical Society of Korea
• /
• v.17 no.5
• /
• pp.415-422
• /
• 2013

White-light phase-shifting interferometry (WLPSI) is widely recognized as a standard method to measure shapes with high resolution over a long distance. In practical applications, WLPSI, however, is associated with some degree of ambiguity of its phase, which occurs due to a phase delay, which is the offset between the phase of the fringes and the fringe envelope peak position. In this paper, a new algorithm is proposed for the determination of a fringe order suitable for samples in which the phase delay mainly occurs due to noise, diffraction and a steep angle. The concepts of the decouple factor and the connectivity are introduced and a method for calculating the decouple factor and the connectivity is developed. With the phase-unwrapping procedure which considers these values, it is demonstrated that our algorithm determines the correct fringe order. To verify the performance of the algorithm, a simulation was performed with the virtual step height under noise. Some specimens such as step height standard and a column spacer with a steep angle are also measured with a Mirau interference microscope, after which the algorithm is shown to be effective and robust.