• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.169-176
• /
• 2008

The purpose of this study was to evaluate the effect of thickness, filling methods and curing methods on the polymerization of dual cured core materials by means of microhardness test. Two dual cured core materials, MultiCore Flow (Ivoclar Vivadent AG, Schaan, Liechtenstein) and Bis-Core (Bisco Inc., Schaumburg, IL, USA) were used in this study. 2 mm (bulky filled), 4 mm (bulky filled), 6 mm (bulky and incrementally filled) and 8 mm (bulky and incrementally filled)-thickness specimens were prepared with light cure or self cure mode. After storage at $37^{\circ}C$ for 24 hours, the Knoop hardness values (KHN) of top and bottom surfaces were measured and the microhardness ratio of top and bottom surfaces was calculated. The data were analyzed using one-way ANOVA and Scheffe multiple comparison test, with ${\alpha}=0.05$. The effect of thickness on the polymerization of dual cured composites showed material specific results. In 2, 4 and 6 mm groups, the KHN of two materials were not affected by thickness. However, in 8 mm group of MultiCore Flow, the KHN of the bottom surface was lower than those of other groups (p < 0.05). The effect of filling methods on the polymerization of dual cured composites was different by their thickness or materials. In 6 mm thickness, there was no significant difference between bulk and incremental filling groups. In 8 mm thickness, Bis-Core showed no significant difference between groups. However, in MultiCore Flow, the microhardness ratio of bulk filling group was lower than that of incremental filling group (p < 0.05). The effect of curing methods on the polymerization of dual cured composites showed material specific results. In Bis-Core, the KHN of dual cured group were higher than those of self cured group at both surfaces (p < 0.05). However, in MultiCore Flow, the results were not similar at both surfaces. At the top surface, dual cured group showed higher KHN than that of self cured group (p < 0.05). However, in the bottom surface, dual cured group showed lower value than that of self cured group (p < 0.05).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.24 no.3
• /
• pp.21-25
• /
• 1979

To evaluate the possibility of hardening of rice seedlings to chilling injury by low temperature conditioning for improvement of nursery temperature management a chilling sensitive new variety Tongil from Indica \times Japonica cross and a chilling tolerant Japonica variety Jinheung were reared by the 3rd leaf-stage in a day $30^{\circ}C/night\; 20^{\circ}C$ growth chamber, and were subjected to temperature conditioning for hardening against chilling injury for 6 days. Then the seedlings conditioned and unconditioned were chilled in a day and night $8^{\circ}C$ chamber for 2, 4, 6, or 8 days long and returned to the day and night $30^{\circ}C/night\; 20^{\circ}C$ condition for development of chilling injuries. Survival rate after chilling injury development of the variety Tongil showed distinct effect of hardening, i. e. the unhardened-25 % survival, the hardened by a gradual drop of temperature regime $(30^{\circ}C/20^{\circ}C\rightarrow24^{\circ}C/14^{\circ}C\rightarrow18^{\circ}C/12^{\circ}C\rightarrow8^{\circ}C)4 -59% survival and the hardened. by repeated brief exposure (4hrs. to 6hrs.) to $8^{\circ}C$ shock-89% survival against chilling of $8^{\circ}C$ for 4 days long. The variety Jinheung survived even against 8 days chilling at $8^{\circ}C$ C, but the discoloration rate of leaves due to chilling showed noticeably the hardening effect as repeated shock was much better than the gradually lowering temperatures.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.4
• /
• pp.249-257
• /
• 2022

This study was conducted to comparison analysis growth characteristics, yield and forage quality of 18silage corn varieties grown in paddy and upland fields. In this condition, days to silking of Sinhwangok was the shortest with 78 days and Kangdaok the longest with 92 days. Moreover it was confirmed that the difference of days to silking at this condition greatly occurred in the late species than in the precocious species. The height and ear height ratio of corn grown in paddy decreased by 5~10% and increase by 10~15% compared to upland, respectively. It was confirmed that the ear ratio of corn which enhances the forage quality was highest in Sinhwangok at paddy and upland and most of the varieties decreased by 10~30% at paddy rather than upland. The length of ear was also reduced by 10~25%. In fresh yield, Dacheongok showed the highest yield at 65,750 kg/ha in upland and 38,830 kg/ha in paddy. Similar to the fresh yield, dry and TDN yield in Dacheongok also showed the highest yield at 36,910 kg/ha, 18,040 kg/ha in upland and 21,670 kg/ha, 14,390 kg/ha in paddy, respectively. As a result of analyzing crude protein and starch from seeds to evaluate the feed value of corn for silage, there was no difference between cultivars grown in this condition. In addition, as a result of analyzing the contents of ADF and NDF using leaves, stems and seeds, the contents of leaves and stems were lower in P3394 and P1543 at the upland and lower in Singwangok and Daanok when cultivated at paddy. Moreover ADF and NDF contents were decreased in some varieties in paddy rather than upland. Therefore, there is no significant difference in the feed value of corn varieties grown in this condition, it is possible to cultivate corn in paddy if normal growth is achieved through drainage management.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.4
• /
• pp.243-248
• /
• 2022

This study was conducted to evaluate the effect of feeding the whole crop rice silage (WCRS) which partially replaces the imported grass hay crop on the milking performance of Holstein and profitability. Two experimental diets were used according to the traditional practice of dairy farms. The control diet (C) was composed of 13kg/day of mixed hay, 6.8kg/day concentrate, and orchardgrass/bermudagrass hay (1.8kg/day). The treatment diet (T) was composed of 9.6kg/day of mixed hay, 6.8kg/day of concentrate and 2.2kg/day of WCRS. The CP content of the WCRS (4.6%) was lower than orchardgrass (11.3%) and bermudagrass hay (8.4%) due to the harvest being 30days later than the optimum harvest date of rice. The lower intake was observed in T during the entire experiment period which seems to be related to the higher proportion of fiber in rice (p<0.05). No significant difference was found in milk production between C (26.9kg) and T (26.3kg) during the entire experiment period (p>0.05). Also, no difference in milk fat, milk protein, total solids, and milk composition was observed between the two diets. Higher income per head was resulted in T (21,141won) compared to C (21,915 won). These results indicate that the partial replacement of the grass hay by the WCRS can bring the profit to the dairy farm due to the no difference between the control diet and the treatment diet.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.4
• /
• pp.229-236
• /
• 2022

This study was conducted to evaluate the efficacy of adding the microbial inoculants to silage for reducing mycotoxins in rice straw silage. When a single agent of L. plantarum and a mixed agent of L. plantarum and S. cerevisiae were added in rice straw silage contaminated mycotoxins, it had an effect on silage fermentation and fiber degradation as well as mycotoxin reduction. Among the mycotoxins, only ochratoxin A and zearalenone were found in the test sample. Ochratoxin A and zearalenone showed a decreasing trend with the addition of silage inoculants compared to the control groups (38.11±2.22 and 633.67±50.30 ㎍/kg), and there was a significant difference at the mixed agents; 27.78±2.28 and 392.72±25.04 ㎍/kg, respectively (p<0.05). The pH was lower in the single agent and the mixed agent compared to the control (p<0.05). The concentration of lactic acid was higher in the single agent (11.73±0.31 mM) than in the control group (8.18±0.93 mM), and the highest concentration was 16.01±0.88 mM in the mixed agent (p<0.05). Acetic acid and propionic acid were found to be significantly lowered with the addition of silage inoculants (p<0.05). Total VFA was also lower at the addition of silage inoculants than the control group (p<0.05). The rumen in situ dry matter degradation of NDF and ADF was maintained at the highest levels of the mixed agent during the culture period, followed by the single agent and the control group at the lowest level. NDF and ADF degradation showed a significant difference at all time points after 12 and 24 hours of culture, respectively (p<0.05). The study results showed that the silage inoculants had the positive effects on quality increasing of rice straw silage; fermentative charateristics, fiber degradation and mycotoxins reduction. Ochratoxin A and zearalenone were greater reduction by adding bacterial inoculants of silage. Therefore it is considered that L. plantarum and S. cerevisiae will improve the quality and stability with remediation of mycotoxin in silage.

• Journal of Wetlands Research
• /
• v.25 no.2
• /
• pp.99-110
• /
• 2023

Non-point source (NP) pollutants in an agricultural landuse are discharged from a large area compared to those in other land uses, and thus effective source control measures are needed. To develop appropriate control measures, it is necessary to quantify discharge load of each source and evaluate the degree of water quality improvement by implementing different options of the control measures. This study used Hydrological Simulation Program-FORTRAN (HSPF) to quantify pollutant discharge loads from different sources and effects of different control measures on water quality improvements, thereby supporting decision making in developing appropirate pollutant control strategies. The study area is the Gyeseong river watershed in Changnyeong county, Gyeongsangnam-do, with agricultural areas occupying the largest proportion (26.13%) of the total area except for the forest area. The main pollutant sources include chemical and liquid fertilizers for agricultural activities, and manure produced from small scale livestock facilities and applied to agriculture lands or stacked near the facilities. Source loads of chemical fertilizers, liquid fertilizers and livestock manure of small scale livestock facilities, and point sources such as municipal wastewater treatment plants (WWTPs), community WWTPs, private sewage treament plants were considered in the HSPF model setup. Especially, NITR and PHOS modules were used to simulate detailed fate and transport processes including vegitation uptake, nutrient deposition, adsorption/desorption, and loss by deep percolation. The HSPF model was calibrated and validated based on the observed data from 2015 to 2020 at the outlet of the watershed. The calibrated model showed reasonably good performance in simulating the flow and water quality. Five Pollutants control scenarios were established from three sectors: agriculture pollution management (drainge outlet control, and replacement of controlled release fertilizers), livestock pollution management (liquid fertilizer reduction, and 'manure management of small scale livestock facilities) and private STP management. Each pollutant control measure was further divided into short-term, mid-term, and long-term scenarios based on the potential achievement period. The simulation results showed that the most effective control measure is the replacement of controlled release fertilizers followed by the drainge outlet control and the manure management of small scale livestock facilities. Furthermore, the simulation showed that application of all the control measures in the entire watershed can decrease the annual TN and TP loads at the outlet by 40.6% and 41.1%, respectively, and the annual average concentrations of TN and TP at the outlet by 35.1% and 29.2%, respectively. This study supports decision makers in priotizing different pollutant control measures based on their predicted performance on the water quality improvements in an agriculturally dominated watershed.

• Economic and Environmental Geology
• /
• v.56 no.2
• /
• pp.167-183
• /
• 2023

Gases originated from the final SNF (spent nuclear fuel) disposal site are very mobile in the barrier and they may also affect the migration of radioactive nuclides generated from the SNF. Mechanisms of gas-nuclide migration in the multi-barrier and their influences on the safety of the disposal site should be understood before the construction of the final SNF disposal site. However, researches related to gas-nuclide coupled movement in the multi-barrier medium have been very little both at home and abroad. In this study, properties of gas generation and migration in the SNF disposal environment were reviewed through previous researches and their main mechanisms were summarized on the hydrogeological evolution stage of the SNF disposal site. Gas generation in the SNF disposal site was categorized into five origins such as the continuous nuclear fission of the SNS, the Cu-canister corrosion, the oxidation-reduction reaction, the microbial activity, and the inflow from the natural barriers. Migration scenarios of gas in porous medium of the multi-barrier in the SNF repository site were investigated through reviews for previous studies and several gas migration types including ① the free gas phase flow including visco-capillary two-phase flow, ② the advection and diffusion of dissolved gas in pore water, ③ dilatant two-phase flow, and ④ tensile fracture flow, were presented. Reviewed results in this study can support information to design the further research for the gas-nuclide migration in the repository site and to evaluate the safety of the Korean SNF disposal site in view points of gas migration in the multi-barrier.

• Journal of Korea Water Resources Association
• /
• v.56 no.9
• /
• pp.543-551
• /
• 2023

Snow is an essential climate factor that affects the climate system and surface energy balance, and it also has a crucial role in water balance by providing solid water stored during the winter for spring runoff and groundwater recharge. In this study, statistical analysis of Local Data Assimilation and Prediction System (LDAPS), Modern.-Era Retrospective Analysis for Research and Applications, version 2 (MERRA-2), and ERA5-Land snow depth data were used to evaluate the applicability in South Korea. The statistical analysis between the Automated Synoptic Observing System (ASOS) ground observation data provided by the Korea Meteorological Administration (KMA) and the reanalysis data showed that LDAPS and ERA5-Land were highly correlated with a correlation coefficient of more than 0.69, but LDAPS showed a large error with an RMSE of 0.79 m. In the case of MERRA-2, the correlation coefficient was lower at 0.17 because the constant value was estimated continuously for some periods, which did not adequately simulate the increase and decrease trend between data. The statistical analysis of LDAPS and ASOS showed high and low performance in the nearby Gangwon Province, where the average snowfall is relatively high, and in the southern region, where the average snowfall is low, respectively. Finally, the error variance between the four independent snow depth data used in this study was calculated through triple collocation (TC), and a merged snow depth data was produced through weighting factors. The reanalyzed data showed the highest error variance in the order of LDAPS, MERRA-2, and ERA5-Land, and LDAPS was given a lower weighting factor due to its higher error variance. In addition, the spatial distribution of ERA5-Land snow depth data showed less variability, so the TC-merged snow depth data showed a similar spatial distribution to MERRA-2, which has a low spatial resolution. Considering the correlation, error, and uncertainty of the data, the ERA5-Land data is suitable for snow-related analysis in South Korea. In addition, it is expected that LDAPS data, which is highly correlated with other data but tends to be overestimated, can be actively utilized for high-resolution representation of regional and climatic diversity if appropriate corrections are performed.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.50 no.1
• /
• pp.89-103
• /
• 2023

The purpose of this study was to measure bone age using an artificial intelligence program based on the Greulich-Pyle (GP) method to find out the bone age corresponding to each stage of cervical vertebral maturation (CVM) and the middle phalanx of the third finger (MP3). This study was conducted on 3,118 patients who visited pediatric dentistry at Kyung Hee University Dental Hospital and Pusan National University Dental Hospital from 2013 to 2021. The CVM stage was divided into 5 stages according to the classification by Baccetti, and the MP3 stage was divided into 5 stages according to the methods of Hägg and Taranger. Based on the GP method, bone age was evaluated using an artificial intelligence program. The pubertal growth spurt in the CVM stage was CVM II and III. The mean bone age in CVM II was 11.00 ± 1.81 years for males and 10.00 ± 1.49 years for females, and in CVM III, 13.00 ± 1.46 years for males and 12.00 ± 1.44 years for females (p < 0.0001). The pubertal growth spurt in the MP3 stage was MP3 - G stage. The bone age at the MP3 - G stage was 13.14 ± 1.07 years for males and 11.40 ± 1.09 years for females (p < 0.0001). Bone age evaluation using artificial intelligence is worth using in clinical practice, and it is expected that a faster and more accurate diagnosis will be possible.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.50 no.1
• /
• pp.113-120
• /
• 2023

Restoring composite resins with the optimal shades for all primary teeth is a great challenge for pediatric dentists. A newly developed single-shade composite resin can exhibit a color similar to that of the surrounding tooth structure based on the structural color phenomenon. This study aims to evaluate the color adjustment potential (CAP) of a single-shade composite resin compared to conventional multi-shade composite resins in primary teeth. A single-shade composite resin and two conventional multi-shade composite resins were included in this study. Two types of specimens, a single specimen and a dual specimen, were evaluated. For single specimens, duplications of the primary second molar denture teeth were made using experimental composite resins. For dual specimens, cavities were prepared on the buccal surfaces of extracted primary second molars and restored with experimental composite resins. The L^*, a^*, and b^* values were measured using a colorimeter for the extracted teeth and specimens. The mean ΔE_ab^* values for single and dual specimens and CAP were calculated. Bonferroni post-hoc analysis was performed to confirm the statistical significance between the ΔE_ab^* and CAP values of the experimental resins. Among the single specimens, the single-shade composite resin showed significantly higher ΔE_Single compared to other composite resins (p < 0.0167). There was no significant difference between ΔE_Dual for all experimental resins. The single-shade composite resin showed highest CAP compared to other multi-shade composite resins. A single-shade composite resin exhibited the most prominent color adaptability compared to other conventional multi-shade composite resins for primary second molars. A single-shade composite resin can simplify shade matching and provide esthetic outcomes for the restoration of primary second molars.