Kim, Tetsuro ata;Keisuke Uenishi;Akira Ikenaga;Kojiro F. Kobayashi
대한용접접합학회:학술대회논문집
/
대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
/
pp.726-731
/
2002
Reaction synthesis is a process to form ceramics, intermetallics and their composites from elemental powder mixture. Application of this process to a surface modification techniques has a possibilities to enable the process at a lower temperature or for a shorter time, although synthesized materials are likely to include voids and unreacted elements. This paper intend to examine the effect of Si addition to the mixture of Al and Ni on the densification of synthesized Ni-Al intermetallic compounds and to evaluate the surface properties of obtained coatings. By the Si addition, exothermic reaction temperature to form Ni-Al intermetallic was lowered to be below the melting point of Al. Si soluted $Al_3$Ni$_2$, $Al_3$Ni and $Al_{6}$Ni$_3$Si were mainly formed in the coating layer when powder mixture was heated to 973K for 300s. Besides, densification was enhanced by increasing hot press pressure, Si additions and heating rate. When the composition of eutectic Al-Si reaches 78%, void ratio of sintered compact reduced to 0.4%. It is caused by higher flowability of Al-Si liquid phase generated and its infiltration into the void. Since the hardness of NiAl(Si) compound (about 600HV) formed in the coating layer is higher than that of Ni-Al compound (about 400HV), coating layer with high density and superior wear property is obtained by hot press using reaction synthesis from Al-Ni-Si powder mixture.
In this report the thermochemical conversion of Sm2O3 to SmCl3 using AlCl3 in LiCl-KCl melt at 773 K is discussed. The final product was a mixture of SmCl3, Al2O3, unreacted Sm2O3 and AlCl3 in the chloride melt. The electrochemical attributes of the mixture was analyzed with cyclic voltammetry (CV) and square wave voltammetry (SWV). The crystallographic phases of the mixture were studied with X-ray diffraction (XRD) technique. The major chemical conversion was optimized by varying the effective parameters, such as concentrations of AlCl3, duration of reaction and the amount of LiCl-KCl salt. The extent of conversion and qualitative assessment of efficiency of the present protocol were evaluated with fluorescence spectroscopy, UV-Vis spectrophotometry and inductively coupled plasma atomic emission spectroscopy (ICP-AES) studies of the mixture. Thus, a critical assessment of the thermochemical conversion efficiency was accomplished by analysing the amount of SmCl3 in LiCl-KCl melt. In the process, a conversion efficiency of 95% was achieved by doubling the stoichiometric requirement of AlCl3 in 50 g of LiCl-KCl salt. The conversion reaction was found to be very fast as the reaction reached equilibrium in 15 min.
Topical anesthetics act on the peripheral nerves and reduce the sensation of pain at the site of application. In dentistry, they are used to control local pain caused by needling, placement of orthodontic bands, the vomiting reflex, oral mucositis, and rubber-dam clamp placement. Traditional topical anesthetics contain lidocaine or benzocaine as active ingredients and are used in the form of solutions, creams, gels, and sprays. Eutectic mixtures of local anesthesia cream, a mixture of various topical anesthetics, has been reported to be more potent than other anesthetics. Recently, new products with modified ingredients and application methods have been introduced into the market. These products may be used for mild pain during periodontal treatment, such as scaling. Dentists should be aware that topical anesthetics, although rare, might induce allergic reactions or side effects as a result of an overdose. Topical anesthetics are useful aids during dental treatment, as they reduce dental phobia, especially in children, by mitigating discomfort and pain.
Freezing of the binary solution ($H_2O-NaCl$) saturating a packed bed of spheres is investigated experimentally. The system is cooled through its top surface, and the bottom is maintained at a temperature above the liquidus. Experiments are performed on the hypolutectic side, and the cold wall temperature is lower than the eutectic point. The effects of initial mixture concentration, superheat and glass bead diameter on temperature and concentration distributions are investigated. Supercooling was observed only at early times of the freezing process for experiments with 5% initial salt concentration. Flow visualization experiments and mushy-liquid interface position observations revealed natural convection in the liquid region. Remelting phenomena was not observed at both the solid-mushy and mushy-liquid interfaces.
Gilliam, Stephen N.;Coble, Jamie B.;Goddard, Braden
Nuclear Engineering and Technology
/
제54권6호
/
pp.2004-2010
/
2022
Quantification of sensitive material is of vital importance when it comes to the movement of nuclear fuel throughout its life cycle. Within the electrorefiner vessel of electrochemical separation facilities, the task of quantifying plutonium by neutron analysis is especially challenging due to it being in a constant mixture with curium. It is for this reason that current neutron multiplicity methods would prove ineffective as a safeguards measure. An alternative means of plutonium verification is investigated that utilizes the (𝛼,n) signature that comes as a result of the eutectic salt within the electrorefiner. This is done by utilizing the multiplicity variable a and breaking it down into its constituent components: spontaneous fission neutrons and (𝛼,n) yield. From there, the (𝛼,n) signature is related to the plutonium content of the fuel.
The interaction and detergency between oily soil and surfactant solution were studied Samples used were tristearin, tripalmitin and their mixture as a triglyceride, myristic acid as a fatty acid and sodium dodecyl sulfate (SDS) as surfactant. The results were as follows: 1. The mixtures of model oily soils were formed of eutectic point and their melting point were lower than them of individual oily soils. 2. The formation of liquid crystalline (LC) phase was recognized in the triangle phase diagram for SDS~ water~model oily soil system. The areas of LC phase region were in the order of SHS~ water~myristir acid> SDS~ water~mixture of tristearin, tripalmitin and myristic acid (TS/TP/M)>SDS~water~mixture of tristearin and tripalmitin (TS/TP) 3. The LC phase region expanded to wide concentration range of SDS solution and high concentration range of model oily soil with increasing temperature. Particularity, the LC phase region expanded highly at $30~40^{\circ}C$ but when the temperature was elevated above $40^{\circ}C$, expanding tendency decreased. 4. In the system of myristic acid and TS/TP/M contacted with SDS solution, the LC phase was already formed at $28^{\circ}C$ and the region of the LC phase were expanded with increasing temperature. But in the system of TS/TP contacted with SDS solution, the LC phase was not formed in whole experiment temperature. 5. The detergency of myristic acid was very high ann it was recognized that the formation of the LC phase played an important role in the detergency. The detergency of TS/TP was very for low, but when TS/TF was mixed with myristic acid, the detergency of TS/TP increased. It is supposed that the LC phase was formed butween SDS solution and myristic acid promoted to penetration of SDS solution into the inner parts of TS/TP.
Chloral hydrate와 hydroxizine을 이용한 경구진정법은 적용대상의 나이와 체중에 따라 제한을 받는다. 일반적으로 경구 진정법은 36개월 미만, 체중 15 kg 미만의 환아에서 가장 좋은 진정 효과를 보인다. 그러나 36개월 이상 또는 15 kg 이상의 환아에 대해서는 경구진정법이 적절한 진정 효과를 얻는데 한계를 가지며, 얕은진정으로 인해 시술 중 잦은 움직임을 보여 쉽게 진정에 실패하게 된다. 진정 실패 시 고려 할 수 있는 대안은 추가적인 약제 투여로 인한 재진정의 유도나, 좀 더 깊은진정 법으로의 전환이 있다. 그러나 깊은진정법으로의 전환은 환아의 움직임과 동통의 감소를 위해 흡입마취제 및 마취기계가 요구되어 외래 진료실에서는 쉽게 선택되지 못한다. EMLA cream(Eutectic Mixture of Local Anesthesia)은 피부의 도포마취를 위해 널리 사용되고 있는 약제로 본 증례에서는 이를 이용하여 자극 없이 정주진정 경로를 확보하여 경구진정에서 정주진정으로의 전환에 성공하였다. 만 46개월, 체중 15 kg 남아가 다발성 우식을 주소로 단국대학교 치과대학 병원 소아치과에 내원하였다. 일반적인 행동조절 하에 치료 권유하였으나 보호자의 요구에 의해 경구진정 시도하였으며, 경구진정 실패를 고려하여 복용 전 EMLA cream을 사전 도포하였다. 경구 복용 90분 경과 뒤에도 진정효과를 얻지 못하여 보호자의 동의하에 아산화질소를 이용하여 얕은진정 유도 후, EMLA cream 도포 부위에 정맥로를 확보하였다. 총 시술 시간 2시간 30분으로 특별한 부작용 없이 성공적으로 시술을 완료하였다.
Journal of the Korean Data and Information Science Society
/
제25권4호
/
pp.705-714
/
2014
우리나라 질병관리본부는 전염병 예방을 목적으로 국가 필수 예방접종을 정하여 특정 시기에 접종하도록 권장하는데, 대부분의 예방접종이 만 2세 전에 집중되어 있어 필수 예방접종만 투여 받더라도 영아는 14~20회 정도 접종을 받게 된다. DPT (diphtheria, pertussis, and tetanus) 는 제2군 법정전염병인 디프테리아, 백일해, 파상풍 예방을 목적으로 생후 2, 4, 6, 18개월 영아에게 근육주사하게 된다. 근육주사 시 주사 바늘 천자 및 약물 주입에 따른 통증이 유발되는데, 본 연구는DPT 예방접종을 받는 2, 4, 6개월 영아 49명을 대상으로 예방접종 시 유발되는 통증경감을 위해 국소마취용 크림인 EMLA (eutectic mixture of local anaesthetics)와 냉각 스프레이의 통증경감 효과를 조사하였다. 연구 결과 EMLA 적용군이 대조군과 냉각 스프레이 적용군에 비하여 주사 전후 맥박수와 산소포화도에 변화가 거의 없어 생리적 반응에서 통증경감 효과가 있는 것으로 나타났다. 결론적으로 EMLA 적용 군이 통증반응에 대한 생리적 변수, 즉 맥박수와 산소포화도를 정상범주로 유지하는데 있어서 냉각스프레이보다 더 효과적인 중재로 검증되었으므로 향후 DPT 예방접종 시 EMLA 크림의 적용 가능성을 시사하는 바이다.
파라디옥사논에 포함된 주요한 불순물인 디에틸렌글리콜을 제거하기 위해, 파라디옥사논과 디에틸렌글리콜과의 이성분계 고액 상평형 및 혼합물의 밀도를 측정하였으며, 종(seed)을 이용한 경막 용융결정화 실험을 하였다. 얻어진 2성분계 고액 상평형 결과는 단순 공융계를 형성하였는데, 공용점은 파라디옥사논의 0.08 몰농도에서 246 K였다. 또한, 혼합물의 밀도 데이터는 ${\rho}_l=k_1+k_2x+k_3T+k_4xT$ 식과 잘 연관되었으며, 각 파라메타인 $k_1$, $k_2$, $k_3$ 및 $k_4$의 값은 0.405, 1.361, 0.002, -0.004이었다. 용융결정화 실험에서 결정 성장속도(G)는 냉각속도가 감소하거나 파라디옥사논의 초기농도가 증가할수록 감소하는 경향을 나타내었으며, 결정 성장속도식은 과냉각 온도의 1.5승에 비례하였다. 또한, 불순물의 제거 정도를 나타내는 유효 분배계수($K_{eff}$)는 냉각속도 및 PDX 초기농도가 증가할수록 증가하는 경향을 나타내었으며, 유효분배계수는 Wintermantel 모델에 의해 $K_{eef}=-0.0604+6.392{\times}Z$ 관계로 표현되었다. 최종적으로 얻어진 PDX 순도는 결정화 조작변수를 최적화하여 99% 이상으로 조절할 수 있음을 알 수 있었다.
치과치료를 위하여 마취를 시행할 때 아동들의 주사기나 주사바늘에 대한 불편감을 감소시키기 위한 여러 방법들이 있다. 도포마취제의 사용이 한 가지 방법이다. 도포마취는 많은 임상과정, 즉 주사침 자입부위, 간단한 유치발치, 구토반응이 심한 환자에서 치과용 구내 방사선 촬영시, 인상채득 전 구토반응의 감소 목적 등으로 사용되어 왔다. 또한 소아에서 치면열구전색술과 예방심미수복술시 치아격리를 위한 러버댐 clamp의 장착은 불편감을 유발할 수 있는데, 도포마취는 이런 목적으로 러버댐 장착시 도움이 된다. 모든 구강내 도포마취제는 점막에 동등한 효과가 있다고 제안되었으나, 1980년대 개발되어 피부의 표면마취에 사용되는 EMLA(acronym for eutectic mixture of local anaesthetics)가 기존의 도포마취제보다 부착치은에 사용시 더 효과가 있다고 보고되고 있다. 본 증례에서는 침윤마취가 필요한 몇 증례에서 EMLA cream을 이용하여 국소마취를 하기 전단계, 유치 발거시, clamp 장착시, 기성관 수복 등에서 동통을 감소시킴으로써 환아의 치과 치료에 대한 불안감을 감소시키는데 매우 효과적이었기에 보고하는 바이다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.