• 한국식품영양학회지
• /
• 제12권5호
• /
• pp.447-454
• /
• 1999

Ginseng-vinegars were produced by the fermentation of 5% ethanol solution contained ginseng, red ginseng, ginseng marc and red ginseng marc using Acetobacter aceti 3281 for 26 days at 35$^{\circ}C$. The ginseng and red ginseng vinegar contained 0.236mg/ml of total sugar 0.236mg/ml of reducing sugar and 0.05% of ethanol and 1.005 of specific gravity 8,58CFU of viable cell count 3,24 of pH and 5.11% of acidity. Whereas the vinegars produced using the water-extracted red ginseng marc and the ethanol-extracted red ginseng marc were consisted of total sugar was 1.27mg/ml and 1.60mg/ml reducing sugar was 0.077mg/ml and 0.725mg/ml specific gravity was 1.001 and 1.004 the number of viable cells was 8.51CFU/ml and 8.1CFU/ml pH was 2.81 and 2.89 acidity was 5.18% and 5.32% respectvely ethanol concentration was 0.05% in both cases. In five-grade scoring test of sensory evaluation, it was estimated favorable that each vinegar made by were-extracted red ginseng marc, ethanol-extracted red ginseng marc ginseng and red ginseng ginseng from 0.5 to 32% of water-and ethanol-extract red ginseng was extracted with 10% white vinegar for 30 days. The best sensory vinegars were obtained that ginseng of 0.4~1.6% above red glnsend of 0.8% water-extracted red ginseng marc of 0.8~1.6% and ethanol-extracted red ginseng marc of 0.4~1.6% added in 10% white vinegar respectively.

• Fibers and Polymers
• /
• 제1권2호
• /
• pp.92-96
• /
• 2000

A high molecular weight polyhydroxyamide (PHA) solution in N, N-dimethyl acetamide (DMAc) was prepared from 3, 3'-dihydroxybenzidine and isophthalic chloride (IPC), which was used for spinning PHA fiber. Before spinning, the diffusion property of DMAc into various coagulants was examined. The fiber was well formed in coagulants such as water/ethanol with a composition of 5/5, ethanol, and ethanol/isopropanol with a composition of 7/3 and 5/5. However, the PHA fiber spun in the water/ethanol mixture contained voids. After the fiber spun in ethanol was annealed at over $350^{\circ}C$, the ultimate stress and initial modulus of the fiber increased from 75.5 MPa and 3.22 GPa to 369 MPa and 29.5 GPa, respectively. These properties of the PHA fiber spun by the dry spinning method were also enhanced, attaining 154 MPa and 5.56 Gpa, respectivel.

• 멤브레인
• /
• 제12권4호
• /
• pp.255-261
• /
• 2002

폴리비닐알콜을 고분자계 가교제인 폴리아크릴산-말레산 공중합체를 이용하여 가교제의 농도를 변화시키면서 가교하여 막을 제조하였다. 제조한 막은 FT-IR과 수팽윤도 측정을 통하여 가교반응을 확인하였으며, 가교제 농도 증가에 따라서 수팽윤도가 감소하는 경향을 나타내었다. 고분자가교제인 폴리아크릴산-말레산 공중합체로 가교된 폴리비닐알콜 막은 글루탈알데히드로 가교된 폴리비닐알콜이나 변성 폴리비닐알콜 막에 비해서 수팽윤도가 감소하였다. 이는 고분자가교제에 의한 화학적가교와 더불어 물리적인 가교효과가 증가하여 막의 팽윤을 억제하기 때문으로 사료된다. 에탄올수용액에 대한 투과증발실험 결과 가교제의 농도가 증가할수록 선택도는 증가하며, 투과유량은 감소하는 경향을 나타내었으며, 공급액 중의 물의 농도가 증가할수록 선택도는 약간 감소하나 투과유량은 급격히 증가하고, 공급액 중의 물의 농도가 증가하여도 가소화현상이 나타나지 않는 것을 관찰하였다. 이는 고분자가교제에 의한 팽윤억제 메카니즘이 작용하기 때문으로 사료된다.

• 한국식품과학회지
• /
• 제15권1호
• /
• pp.70-76
• /
• 1983

과당과 포도당의 혼합물로부터 과당의 분리에 관한 염과 용매의 영향을 이들 두 당의 용해도 차를 이용한 결정화 방법에 의해서 조사하였다. 결정화 방법은 이들 두 당의 혼합용액에 알콜과 $CaCl_2$, NaCl을 첨가하여 실행하였다. 에틸알콜이 메틸알콜, iso-프로판올 및 n-부탄올보다 분리에 더 좋은 용매라는 것을 알았으며, 알콜용액에 NaCl을 첨가하면 $CaCl_2$를 첨가하는 경우와 소금을 첨가하지 않은 경우보다 더 낳은 결과를 가져온다는 것을 알았다. 이 경우에 있어서 분리하려는 feed 용액에서의 과당과 포도당의 비율이 1 : 1 이었는데 feed 용액에서의 두 당의 조성비를 변화시킨 결과 더 좋지 않은 분리 결과를 가져왔다. 결론적으로 과당의 가장 좋은 분리는 20% 물과 40% 과당, 40% 포도당으로 이루어진 feed 용액에 NaCl과 에틸알콜을 첨가함으로써 결정화시키려는 용액에서의 각 성분이 에틸알콜 36ml, 물 4ml, 과당 8gm, 포도당 8gm, NaCl 0.25gm과 같은 조성을 이룰 때 얻어졌다.

• 한국식품과학회지
• /
• 제15권2호
• /
• pp.133-134
• /
• 1983

Some metallic ions such as copper, manganese, iron, zinc and cadmium in ginseng extract, originated from white ginseng, were determined by atomic absorption spectrophotometry. The extracts were prepared with water, 35% ethanol, 50% ethanol or 75% ethanol solution followed by filtration or centrifugation. Greater amounts of metallic ions were found in the solution filtrated by filter paper (Toyo No. 5A) or by filter cloth than in that of centrifugation. The residual amount of metallic ions in the extract decreased with increasing concentration of ethanol. The percentages of each metallic ion in ginseng extracts on the basis of original amount of metallic ions were as follows: Cu, 10.4-31.9%, Fe,5.1-19.0%, Mn,3.0-12.2% Zn,7.4-12.0%, Cd,5.9-11.8%.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2015년도 추계학술대회 논문집
• /
• pp.189-189
• /
• 2015

In this study, the corrosion resistance and adhesion of electrophoretic paint (E-paint) were studied on AZ31 magnesium alloy pretreated in cerium chemical conversion coating solutions with the addition of various ethanol concentrations. It was found that with increasing ethanol concentration from 0 to 90 percent can decrease the formation of $Mg(OH)_2/MgO$ and increase the formation of nano-crystalline cerium oxides on the coating. Both corrosion resistance and adhesion of E-painted AZ31 increased with increasing ethanol concentration. The best E-paint sample was observed on the sample pretreatment in cerium chemical conversion coating solution with the addition of 80 percent of ethanol. This sample showed an excellent adhesion without paint detached after water immersion test for 500 h at $40^{\circ}C$, and only a few blisters observed at the near scratched sites after 1000 h salt-spray test.

• 한국염색가공학회지
• /
• 제31권4호
• /
• pp.276-287
• /
• 2019

In this study, cotton fibers were coated with a different weight percentage of octadecyl dimethyl(3-triethoxy silylpropyl) ammonium chloride(ODDMAC) to improve antimicrobial and water repellent properties. First, the ODDMAC dissolved in ethanol to prepare a solution. Then the cotton fibers were immersed in the ODDMAC/ethanol solution for 10 minutes at ambient temperature and dried at 80℃ for 3 minutes followed by curing. The treated cotton fibers were characterized by scanning electron microscopy(SEM) and x-ray photoelectron spectroscopy(XPS). The treated cotton fibers revealed sufficient antimicrobial activity against Klebsiella pneumoniae(ATCC 4352) and Staphylococcus aureus(ATCCBAA-1707). The hydrophobic nature of the treated cotton fibers was characterized by contact angle measurement. The results showed that the cotton fibers treated with the ODDMAC showed excellent hydrophobic properties which improved to 121°.

• 한국염색가공학회지
• /
• 제29권4호
• /
• pp.256-267
• /
• 2017

The purpose of this study was to analyze the functional ingredients of Perilla Frutescens L. Britt extracts and to confirm the possibility of producing PVA nanofibers using extracts. Distilled water, 3% aqueous sodium hydroxide solution and ethanol were used as extraction solvents. The electrospinning was carried out at a PVA concentration of 12%, an applied voltage of 10 kV and a tip to collector distance of 15cm. The contents of volatile substances, essential oils, total polyphenols and flavonoids of the extracts were measured to examine the constituents of functional materials. Flavor components and esters were identified in 3% sodium hydroxide and ethanol extracts. The content of polyphenols and flavonoids in ethanol extracts was higher than that of medicinal plants. 1wt.% of Tween 20 was added to disperse the essential oil components of the ethanol extract. Addition of a dispersant made it possible to produce a homogeneous mixture by having some compatibility with the ethanol extracts and the PVA molecule. When the concentration of the ethanol extract was 0.25 and 0.5wt%, relatively uniform PVA nanofiber having an average diameter of 350 to 365nm could be produced. The results of FT-IR, XRD and DSC analysis confirmed that Perilla Frutescens L. Britt ethanol extract was well mixed with PVA molecules and was electrospun.

• 한국분말재료학회지
• /
• 제29권6호
• /
• pp.499-504
• /
• 2022

The objective of this study is to assess the impact of spray drying conditions on medium-chain triglyceride (MCT) loading, solubility, and release of an MCT-loaded solid self-emulsifying system in a water-insoluble oily substance. MCT-loaded solid self-emulsifying systems are prepared by spray drying with SDS and calcium silicate. The effects of inlet temperature (60, 80, or 100℃) and feed solution composition (0, 10, 50, 90, or 100% ethanol) on physicochemical properties of MCT-loaded solid self-emulsifying systems are studied. The inlet temperature significantly affects the water solubility of MCT. Moreover, the feed solution composition significantly affects water solubility, release rate, and MCT loading. The MCT-loaded solid self-emulsifying system obtained at 60℃ using 90% ethanol feed solution shows the best physicochemical properties among the synthesized products and exhibits better water solubility (4.43 ± 0.44 vs. 0 ㎍/mL) and release (94.4 ± 1.6 vs. 32.8 ± 7.4%, 60 min) than a commercial product. Furthermore, the MCT-loaded solid self-emulsifying system shows an excellent emulsion droplet size (approximately 230 nm).

• 한국환경과학회지
• /
• 제9권4호
• /
• pp.311-318
• /
• 2000

To improve $CO_2$pemselectivity, a modified silica membrane was prepared by chemical vapor deposition with tetraethoxysilane(TEOS)-ethanol-water, and TEOS-ethanol-water-HCI solution at 300-$600^{\circ}C$. The silica was effectively deposited in the mesopores of a ${\gamma}$-alumina film coated on a porous $\alpha$-alumina tube by evacuating the reactants through the porous wall. In this membrane, $CO_2$interacts, to some extent, with the pore wall, and $CO_2$/$N_2$selectivity then exceeds the value of the Knudsen diffusion mechanism, while the membrane derived from TEOS alone has no $CO_2$selectivity. The silica membrane prepared from TEOS-ethanol-water-HCI solution showed that $CO_2$permeance was $2.5$\times$10^{-7}mol/s^{-1}.m^{-2}.Pa^{-1} at 30{\circ}C$ and $CO_2$/$N_2$selectivity was approximately 3. The $CO_2$permeance and selectivity was improved by enlarging the surface diffusion with modification of chemical affinity of the silica pores.