• 제목/요약/키워드: Ethanol gas

검색결과 354건 처리시간 0.027초

곡류를 첨가한 우유에서 Leuconostoc mesenteroides의 생육과 산생성 및 몇가지 휘발성 향기성분의 분석 (Growth and Acid Production by Leuconostoc mesenteroides in Milk Added with Cereal and Analysis of Several Volatile Flavor Compounds)

  • 고영태;김경희
    • 한국식품조리과학회지
    • /
    • 제11권3호
    • /
    • pp.316-322
    • /
    • 1995
  • 본 연구에서는 우유에 탈지분유 또는 4종의 곡류(쌀, 보리, 밀, 옥수수)를 각각 2% 첨가하고 Leuconostoc mesenteroides(ATCC 9135)로 발효하여 호상의 요구르트를 만든 후, 곡류의 첨가가 유산균의 생육과 산생성에 미치는 영향과 몇가지 휘발성 향기성분을 분석하였다. 곡류의 첨가로 Leuc. mesenteroides의 산생성이 대조군(우유로만 만든 요구르트)보다 현저하게 촉진되었으며, 30시간까지 발효하면서 적정산도와 pH, 생균수를 관찰한 결과는 발효시간이 경과함에 따라 산생성이 현저히 증가하였고 pH는 현저히 저하하였으며 생균수는 12시간 또는 18시간까지 현저히 증가하였다. GC에 의한 휘발성 향기성분 분석에서는 호상 요구르트에 함유된 휘발성분 가운데 acetaldehyde, acetone, ethanol, diacetyl, butanol 및 acetoin의 6가지 성분이 확인되었으며 이중에서 발효에 의해 생성된 것은 acetaldehyde, ethanol, diacetyl 및 acetoin이었다.

  • PDF

흐름주입식 바이오센서용 기질용액 자동희석 장치 개발 (Development of an Auto Dilution Unit of Substrate Solutionfor a Flow Injection Type Biosensor)

  • 송대빈;정효석;정대홍;김성태
    • Journal of Biosystems Engineering
    • /
    • 제31권5호
    • /
    • pp.443-448
    • /
    • 2006
  • For development of an on-line monitoring unit of fermentation process, an auto dilution unit based on traditional chemical and biological analytical method was developed and the performance was evaluated. The dilution unit was constructed with two syringe pumps and flow direction change valves and fully automated. Total delivery volume of two pumps using distilled water was measured to confirm the operating stability And diluted concentrations of three substrate solutions (glucose, lactic acid, ethanol) were compared with a standard method with a high performance liquid chromatograph (glucose, lactic acid) and gas chromatograph (ethanol). Relative error values of total delivery volume of the pumps were below 3% and standard deviation values were 0.003 (n=5). Relative error values of diluted concentration of the dilution unit measurements were below 2% with 1/10 of dilution ratio and 70, $80{\mu}{\ell}$ of sample volume conditions for glucose and lactic acid, 1/30 of dilution ratio and $70{\mu}{\ell}$ of sample volume conditions for ethanol, respectively. In case of the ethanol, cause of the evaporative characteristics, the relative error values showed over 5% whole experimental conditions.

산화물 반도체를 이용한 최신 호기센서 기술 동향 (Recent Developments in Metal Oxide Gas Sensors for Breath Analysis)

  • 윤지욱;이종흔
    • 세라미스트
    • /
    • 제22권1호
    • /
    • pp.70-81
    • /
    • 2019
  • Breath analysis is rapidly evolving as a non-invasive disease recognition and diagnosis method. Metal oxide gas sensors are one of the most ideal platforms for realizing portable, hand-held breath analysis devices in the near future. This paper reviewed the recent developments in metal oxide gas sensors detecting exhaled biomarker gases such as nitric oxides, acetone, ammonia, hydrogen sulfide, and hydrocarbons. Emphasis was placed on strategies to tailor sensing materials/films capable of highly selective and sensitive detection of biomarker gases with negligible cross-response to ethanol, the major interfering breath gas. Specific examples were given to highlight the validity of the strategies, which include optimization of sensing temperature, doping additives, utilizing acid-base interaction, loading catalysts, and controlling gas reforming reaction. In addition, we briefly discussed the design and optimization method of gas sensor arrays for implementing the simultaneous assessment of multiple diseases. Breath analysis using high-performance metal oxide gas sensors/arrays will open new roads for point-of-care diagnosis of diseases such as asthma, diabetes, kidney dysfunction, halitosis, and lung cancer.

제올라이트 4A 분리막을 이용한 물/에탄올, 물/이소프로필알코올 혼합물의 투과증발 특성 연구 : 활동도계수모형 및 Generalized Maxwell Stefan 모형 (Pervaporation Characteristics of Water/Ethanol and Water/Isopropyl Alcohol Mixtures through Zeolite 4A Membranes: Activity Coefficient Model and Maxwell Stefan Model)

  • 오웅진;정재칠;이정현;여정구;이다훈;박영철;김현욱;이동호;조철희;문종호
    • 청정기술
    • /
    • 제24권3호
    • /
    • pp.239-248
    • /
    • 2018
  • 본 연구에서는 (주)파인텍에서 개발한 제올라이트 4A 분리막을 이용하여 물, 에탄올, 이소프로필알코올 단일 성분 및 혼합물의 투과증발 실험을 수행하였다. 본 분리막은 수열합성법을 이용하여 제막하였고, Si/Al 비율이 1인 LTA 구조에 $Na^+$를 이온교환하여 약 $4{\AA}$의 기공크기를 갖고 있으며, 강한 친수성을 나타내고 있다. 물리적 특성을 확인하기 위해 SEM, porosimetry, BET, 압축강도계를 이용하였다. 다양한 온도 및 농도 조건 실험을 통해 제올라이트 4A 분리막이 물/에탄올(분리계수 3,000 이상) 및 물/이소프로필알코올(분리계수 1,500 이상) 혼합물로 부터 물을 선택적으로 분리할 수 있음을 확인하였다. 활동도계수, Generalized Maxwell Stefan 모형 및 Dusty Gas 모형을 이용하여 단일성분 및 혼합물의 투과증발 거동을 모사하였으며, Genetic Algorithm를 이용한 상수추정을 통하여 분리층의 흡착 및 확산상수를 구하였다.

알코올모델용액을 이용한 여러 종류 활성탄의 휘발성화합물 흡착특성 (Characteristics of Volatile Compound Adsorption from Alcoholic Model Solution onto Various Activated Carbons)

  • 박승국;이명수;김병호;김대옥
    • 산업식품공학
    • /
    • 제14권3호
    • /
    • pp.249-255
    • /
    • 2010
  • 4가지 서로 다른 소재(대나무, 목재, 피탄, 석탄)로 제조된 10가지 활성탄에 대해서, 30% 알코올모델용액에 용해되어 있는 6가지 휘발성화합물(isoamyl alcohol, hexanal, furfural, ethyl lactate, ethyl octanoate, 2-phenyl ethanol)의 흡착효율을 평가하였다. 이들 6가지 휘발성화합물은 알코올음료에서 종종 발견되며, 농도가 높을 경우에는 숙취의 원인이 될 뿐만이 아니라 위스키나 보드카와 같은 술에서 이취의 원인물질이 되기도 한다. 6가지 휘발성화합물이 용해되어 있는 30% 알코올모델용액 200 mL에 0.2 g의 활성탄을 넣고 16시간 일정한 속도로 교반한 후에 처리된 용액을 2가지 시료처리방법(direct liquid injection and headspace-solid phase microextraction)을 이용 GC분석을 수행하여 활성탄의 제거효율을 구하였다. 활성탄의 제거효율은 휘발성화합물의 종류와 활성탄제조의 소재에 따라 차이가 있었으며, ethy octanoate, 2-phenyl ethanol, hexanal에 대한 제거율은 34-100%로 높은 편이나, isoamyl alcohol, ethyl lactate, furfural의 제거율은 5-13%로 비교적 낮은 편이었다. 활성탄의 종류에 따른 제거율은 대나무활성탄인 A가 isoamly alcohol, hexanal, ethyl lactate, furfural 등 대부분의 휘발성화합물에 대해서 유의적으로 높았으며(p < 0.05), 특히 알코올음료에서 숙취와 이취물질이며 fusel oil의 주성분인 isoamyl alcohol, aldehydes(hexanal, furfural), 2-phenyl ethanol에 대한 흡착효율이 높은 것으로 확인되었다.

Ni-W 합금도금용 불용성 양극의 제조 및 특성 연구 (Preparation and Characterization of Insoluble Anodes for Electrodeposition of Ni-W Alloys in Ammoniacal Citrate Bath)

  • 장도연;강성군
    • 한국표면공학회지
    • /
    • 제32권6호
    • /
    • pp.686-694
    • /
    • 1999
  • Insoluble anodes of the Ta/Ir mixed metal oxide for electrodeposition of Ni-W alloy in ammoniacal citrate bath were prepared by thermal decomposition method. Ti plate was etched in boiling oxalic acid solution and coated with ethanol solution of $TaCl_{5}$ and $IrCl_4$ mixed in a fixed ratio, followed by drying and treating at various temperatures. The coating layer of these insoluble anode was characterized by SEM, EDX, XRD and DSC. The decomposition rate of citric acid in plating bath was determined by measuring the $CO_2$ gas evolved at the anodes with Gas Chromatography. Evolution of $CO_2$ gas from Ta/Ir oxide anodes decreased about 5% compared with that of Pt. The $CO_2$ gas evolution was increased with the amount of Ir-oxide in the coatings. The coatings which have more than 40% ratio of Ta content and heat-treated at the temperature higher than $400^{\circ}C$ showed better efficiency

  • PDF

말레에이트 공중합체 LB막의 유기 가스 반응 특성 (Organic Gas Response Characteristics of Maleate Copolymer LB Films)

  • 이을식;김도균;유승엽;최용성;권영수;박재철
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1998년도 춘계학술대회 논문집
    • /
    • pp.415-418
    • /
    • 1998
  • The maleate copolyrner($C_{18}MA-VE_2$) is used as sensitive materials and deposited on the slide-glass substrates at room temperature using Langmuir-Blodgett(LB) method. The results of current-time(1-t) measurements are performed to investigate the gas-detection characteristics of the sensitive LB films in the presence of organic gases just as chloroform, acetone, ethanol, methanol using the apparatus for the gas-detection measurement. Several interesting responses are observed at room temperature, such as reversible response, sensitivity and response time. Response time and sensitivities are evaluated 160~220[sec], minimum 6[times], maximum 70[times] for each organic gas by adsorption and penetration of the organic gases in the relation concentration of 100[%], respectively.

  • PDF

In-decorated NiO Nanoigloos Gas Sensor with Morphological Evolution for Ethanol Sensors

  • Yi, Seung Yeop;Song, Young Geun;Kim, Gwang Su;Kang, Chong-Yun
    • 센서학회지
    • /
    • 제28권4호
    • /
    • pp.231-235
    • /
    • 2019
  • We investigated the facile and effective strategy for sensitive and selective $C_2H_5OH$ sensors based on the In-decorated NiO nanoigloos. The In-decorated NiO nanoigloos is fabricated by RF sputtering using 750 nm-diameter polystyrene beads using a soft-template. The morphological evolution based on the Van der Drift model was generated through a heterojunction between In metal and NiO, resulting in a pyramidal rough surface. Upon decorating the In on the NiO surface, high sensitivity and selectivity to $C_2H_5OH$ were observed, and gas sensing mechanism was demonstrated by a high surface-to-volume and double Schottky barrier. We are confident that the method presented in this study will have a significant impact on the fabrication of effective nanostructures and their application for the gas sensors.

화염 분무 열분해법으로 합성된 Cr-Co3O4 나노입자 자일렌 가스센서 (Xylene Sensor Using Cr-doped Cr-Co3O4 Nanoparticles Prepared by Flame Spray Pyrolysis)

  • 정성용;조영무;강윤찬;이종흔
    • 센서학회지
    • /
    • 제29권2호
    • /
    • pp.112-117
    • /
    • 2020
  • Xylene is a hazardous volatile organic compound that should be precisely measured to monitor indoor air quality. However, the selective and sensitive detection of ppm-level xylene using oxide-semiconductor gas sensors remains a challenge. In this study, pure and Cr-doped Co3O4 nanoparticles (NPs) were prepared using flame spray pyrolysis, and their gas-sensing characteristics to 5-ppm xylene at 250 ℃ were investigated. The 4 at% Cr-doped Co3O4 NPs exhibited a high gas response to 5-ppm xylene (resistance ratio to gas and air = 39.1) and negligible cross-responses to other representative and ubiquitous indoor pollutants such as ethanol, benzene, formaldehyde, carbon monoxide, and ammonia. In this paper, the enhancement of the gas response and selectivity of Co3O4 NPs to xylene by Cr doping was discussed in relation to the catalytic promotion of the gas-sensing reaction. This sensor can be used to monitor indoor xylene.

PVC 및 PC 혼합액을 코팅한 QCM 가스센서의 센싱 및 열화 특성 (Sensing and Degradation Characteristics in the QCM Gas Sensor Coated with the PVC and PC)

  • 장경욱;김명호;이준웅
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2000년도 춘계학술대회 논문집 전자세라믹스 센서 및 박막재료 반도체재료 일렉트렛트 및 응용기술
    • /
    • pp.176-179
    • /
    • 2000
  • In the recognition of the gases using the quartz crystal microbalance (QCM) coated with the film materials, it is important to obtain the recognition ability of gases, and the stability of film coated above the QCM. Especially, the thickness of film coated above the QCM is decreased according with the using circumstance and time of QCM gas sensor. Therefore, the sensing chararcteristics of film is changed with these. In this paper, we coated the lipid PC (Phosphatidyl Choline) materials varing with the blended amount of PVC(Poly Vinyl Chloride) and solution (Tetra Hydrofan:THF) above QCM to obtain the stability of lipid PC film. QCM gas sensors coated with film materials were measured the frequency change in the chamber of stationary gas sensing system injected 1-hexane, ethyl acetate, ethanol and benzene of $20{\mu}{\ell}$, respectively. We obtained the principal component analysis (PCA) from the frequency change due to the absorption of gas. Also, we measured the degradation characteristics of QCM gas sensor to show the properties of stability.

  • PDF