• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.2 s.344
• /
• pp.42-50
• /
• 2006

Owing to the development of semiconductor processing technology, high density complex circuits can be integrated in a System-on-Chip (SoC). However, increasing energy consumption becomes one of the most important limiting factors. Power estimation at the early stage of design is essential, since design changes at lower levels may significantly lengthen the design period and increase the cost. In this paper, logic level circuits ire levelized and several levels are selected to build power model tables for efficient power estimation. The proposed techniques are applied to a set of ISCAS'85 benchmark circuits to illustrate their effectiveness. Experimental results show that significant improvement in estimation accuracy and slight improvement in efficiency are achieved when compared to those of a well-known existing method. The average estimation error has been reduced from $9.49\%\;to\;3.84\%$.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.2 s.34
• /
• pp.21-30
• /
• 2005

In general, the robust estimation method is well known for a good statistical estimator that is insensitive to small departures from the idealized assumptions for which the estimation is optimized. While there are many existing robust estimation techniques that have been proposed in the literature, two main techniques used in computer vision are M-estimators and least-median of squares (LMS). Among these. we utilized the M-estimators since they are known to provide an optimal estimation of affine motion parameters. The M-estimators have higher statistical efficiency but tolerate much lower percentages of outliers unless properly initialized. To resolve these problems, we proposed an adaptive M-estimators algorithm that effectively separates outliers from non-outliers and estimate affine model parameters, using a continuous sigmoid weight function. The experimental results show the superiority of our method.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.3
• /
• pp.20-31
• /
• 2008

In this paper, we propose a single view-based technique for the estimation of human height and position. Conventional techniques for the estimation of 3D geometric information are based on the estimation of geometric cues such as vanishing point and vanishing line. The proposed technique, however, back-projects the image of moving object directly, and estimates the position and the height of the object in 3D space where its coordinate system is designated by a marker. Then, geometric errors are corrected by using geometric constraints provided by the marker. Unlike most of the conventional techniques, the proposed method offers a framework for simultaneous acquisition of height and position of an individual resident in the image. The accuracy and the robustness of our technique is verified on the experimental results of several real video sequences from outdoor environments.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2009.10a
• /
• pp.147-154
• /
• 2009

Physical properties of rocks, such as velocity, are strongly dependant on detailed pore structures, and recently, pore micro-structures by X-ray tomography techniques have been used to simulate and understand the physical properties. However, the smoothing effect during the tomographic reconstruction procedure often causes an artifact - overestimating the contact areas between grains. The pore nodes near a grain contact are affected by neighboring grain nodes, and are classified into grain nodes. By this artifact, the pore structure has higher contact areas between grains and thus higher velocity estimation than the true one. To reduce this artifact, we tried two image processing techniques - sharpening filter and neural network classification. Both methods gave noticeable improvement on contact areas between grains visually; however, the estimated velocities showed only incremental improvement. We then tried to change the resolutions of tomogram and quantify its impact on velocity estimation. The estimated velocity from the tomogram with higher spatial resolution was improved significantly, and with around 2 micron spatial resolution, the calculated velocity was very close to the lab measurement. In conclusion, the resolution of pore micro-structure is the most important parameter for accurate estimation of velocity using pore-scale simulation techniques. Also the estimation can be incrementally improved if combined with image processing techniques during the pore-grain classification.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.5
• /
• pp.57-64
• /
• 2010

Kriging techniques have been used to estimate the spatial distribution of soil layers and soil properties in the geotechnical engineering area. Since the selected kriging technique may provide different values of estimation, the selection of method is important in the geotechnical estimation. In this paper, the spatial distribution of the thickness of consolidation layer of Songdo International City is estimated using simple, ordinary, and universal kriging techniques, and the reliability of estimated results is analyzed. It is shown that the consolidation layer thickness estimated by the simple kriging technique is larger than those by other kriging techniques when the location of estimation is far from the locations where the measured data exist. In this case, the reliability of the simple kriging technique is observed to be lower than those of other techniques. Universal kriging gives a negative value for thickness of consolidation layer in some locations away from the data. It is concluded that the ordinary kriging is the most optimized estimation technique because the reliability of ordinary kriging technique is higher than those of other ones and the consolidation layer thickness estimated by the ordinary kriging locates within the reasonable range.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.4
• /
• pp.68-80
• /
• 2005

This study intends to analysis problems and propose of EIA(Environmental Impact Assessment) and PER(Pre-Environmental Review) especially on division of landscape impacts. The problems of EIA and PER are first, on analysis of existing conditions side, insufficiency of the list of landscape elements and their descriptions and presentations, and the number of viewpoints and each validity second, on estimation of landscape impacts, the methods and techniques of estimation and simulation, and the process of impact estimation, third, on suggestion of reduction plans, reduction devices covering impacts, the lack of influence reduction forecasting devices, the deficiency of execution power of reduction plans, finally, the systematic connection of impact estimation with existing conditions analysis and reduction plans. Therefore, on each step from existing condition analysis to reduction plan suggestion, the solutions to each problem are proposed.

• Journal of Broadcast Engineering
• /
• v.6 no.1
• /
• pp.72-81
• /
• 2001

An adaptive channel estimation technique for OFDM-based DTV receivers is proposed using a new mobility estimator. Sample mean techniques for channel estimation have displayed good performance in slow fading channels, because averaging reduces noise In channel estimation operation. This paper suggests an algorithm which selects the optimal number of symbols within which the sample mean of consecutive pilot data can be obtained. The designed mobility estimator determines the optimal number by comparing mobility variance and estimated noise valiance. The algorithm using the mobility estimator obtains an optimal channel function under time-invariant or time-variant multipath fading channels, thereby making the best BER performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.5
• /
• pp.1109-1122
• /
• 1996

Generally, moving images contain the various components in motions, which reange from a static object and background to a fast moving object. To extract the accurate motion parameters, we must consider the various motions. That requires a wide search egion in motion estimation. The wide search, however, causes a high computational complexity. If we have a few knowledge about the motion direction and magnitude before motion estimation, we can determine the search location and search window size using the already-known information about the motion. In this paper, we present a local adaptive motion estimation approach that predicts a block motion based on spatio-temporal neighborhood blocks and adaptively defines the search location and search window size. This paper presents a technique for reducing computational complexity, while having high accuracy in motion estimation. The proposed algorithm is introduced the forward and backward projection techniques. The search windeo size for a block is adaptively determined by previous motion vectors and prediction errors. Simulations show significant improvements in the qualities of the motion compensated images and in the reduction of the computational complexity.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.433-436
• /
• 2003

In this paper, the efficient motion estimation and compensation method for 3 dimensional wavelet transform is proposed. Recently, since the compression performance and scalable functionality are provided by wavelet transform, many researches have been carried out for applying to the video compression. For the temporal filtering, motion estimation and compensation techniques are used, but the unconnected pixels, which are produced by motion compensation result into the degradation of coding performance and quality of the picture. For the efficient motion compensated temporal filtering by reducing the number of these unconnected pixels, we propose the variable block size motion estimation and compensation method. Also we propose a method that determines the block size using rate-distortion optimization technique according to the local characteristics of the frame. The simulation results show the improved performances than the MPEG-4 scalable coding methods and the 3 dimensional wavelet coding methods using fixed block size motion estimation and compensation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.3
• /
• pp.413-422
• /
• 2000

In the class of models which include random effects, the variance component estimates are important to obtain accurate predictors and estimators. Variance component estimation is straightforward for balanced data but not for unbalanced data. Since orthogonality among factors is absent in unbalanced data, various methods for variance component estimation are available. REML estimation is the most widely used method in animal breeding because of its attractive statistical properties. Recently, Bayesian approach became feasible through Markov Chain Monte Carlo methods with increasingly powerful computers. Furthermore, advances in variance component estimation with complicated models such as generalized linear mixed models enabled animal breeders to analyze non-normal data.