• KIEAE Journal
• /
• 제14권2호
• /
• pp.3-10
• /
• 2014

Impact by estimation error of hourly horizontal global solar radiation in a weather file on building energy performance was investigated in this study. There are a number of weather parameters in a given weather file, such as dry-bulb, wet-bulb, dew-point temperatures; wind speed and direction; station pressure; and solar radiation. Most of them except for solar radiation can be easily obtained from weather stations located on the sites worldwide. However, most weather stations, also including the ones in South Korea, do not measure solar radiation because the measuring equipment for solar radiation is expensive and difficult to maintain. For this reason, many researchers have studied solar radiation estimation models and suggested to apply them to predict solar radiation for different weather stations in South Korea, where the solar radiation is not measured. However, only a few studies have been conducted to identify the impact caused by estimation errors of various solar radiation models on building energy performance analysis. Therefore, four different weather files using different horizontal global solar radiation data, one using measured global solar radiation, and the other three using estimated global solar radiation models, which are Cloud-cover Radiation Model (CRM), Zhang and Huang Model (ZHM), and Meteorological Radiation Model (MRM) were packed into TRY formatted weather files in this study. These were then used for office building energy simulations to compare their energy consumptions, and the results showed that there were differences in the energy consumptions due to these four different solar radiation data. Additionally, it was found that using hourly solar radiation from the estimation models, which had a similar hourly tendency with the hourly measured solar radiation, was the most important key for precise building energy simulation analysis rather than using the solar models that had the best of the monthly or yearly statistical indices.

• Nuclear Engineering and Technology
• /
• 제55권4호
• /
• pp.1342-1349
• /
• 2023

The planning accuracy of charged particle therapy (CPT) is subject to the accuracy of stopping power (SP) estimation. In this study, we propose a method of deriving a pseudo-triple-energy CT (pTECT) that can be achievable in the existing dual-energy CT (DECT) systems for better SP estimation. In order to remove the direct effect of errors in CT values, relative CT values according to three scanning voltage settings were used. CT values of each tissue substitute phantom were measured to show the non-linearity of the values thereby suggesting the absolute difference and ratio of CT values as parameters for SP estimation. Electron density, effective atomic number (EAN), mean excitation energy and SP were calculated based on these parameters. Two of conventional methods were implemented and compared to the proposed pTECT method in terms of residuals, absolute error and root-mean-square-error (RMSE). The proposed method outperformed the comparison methods in every evaluation metrics. Especially, the estimation error for EAN and mean excitation using pTECT were converging to zero. In this proof-of-concept study, we showed the feasibility of using three CT values for accurate SP estimation. Our suggested pTECT method indicates potential clinical utility of spectral CT imaging for CPT planning.

• 경영과학
• /
• 제30권2호
• /
• pp.1-10
• /
• 2013

Case studies are made to investigate the relationship between the accuracy of energy production estimation and project feasibility indicators such as rate of return on equity (ROE) and debt service coverage ratio (DSCR) for three wind farm projects. It is found out that 1% improvement in the accuracy of energy production estimation may enhance the ROE by more than 0.5% in the case of P95, thanks to improved financing terms. AHP survey shows that MCP correlation of measured in situ wind data with long term wind speed distribution and hands-on experiences of flow analysis are more important than other factors for more precise annual energy production estimation.

• ETRI Journal
• /
• 제30권1호
• /
• pp.47-58
• /
• 2008

In sensor networks, analyzing power consumption before actual deployment is crucial for maximizing service lifetime. This paper proposes an instruction-level power estimator (IPEN) for sensor networks. IPEN is an accurate and fine grain power estimation tool, using an instruction-level simulator. It is independent of the operating system, so many different kinds of sensor node software can be simulated for estimation. We have developed the power model of a Micaz-compatible mote. The power consumption of the ATmega128L microcontroller is modeled with the base energy cost and the instruction overheads. The CC2420 communication component and other peripherals are modeled according to their operation states. The energy consumption estimation module profiles peripheral accesses and function calls while an application is running. IPEN has shown excellent power estimation accuracy, with less than 5% estimation error compared to real sensor network implementation. With IPEN's high precision instruction-level energy prediction, users can accurately estimate a sensor network's energy consumption and achieve fine-grained optimization of their software.

• 전기전자학회논문지
• /
• 제26권1호
• /
• pp.10-18
• /
• 2022

정확한 SOC 추정은 배터리 운영 전략을 제시하는 중요한 지표로 많은 연구가 진행되었다. 기존 연구에서 검증을 위해 주로 사용되던 시뮬레이션 방식은 실제 BMS 환경처럼 실시간 SOC를 추정하기 어렵다. 따라서 본 논문에서는 실시간 배터리 SOC 추정이 가능한 임베디드 시스템을 구현하고 검증 과정에서 발생 가능한 문제 분석을 목표로 한다. 2개의 라즈베리파이 보드로 구성된 환경은 Simscape 배터리에서 측정된 데이터로 EKF 기반 SOC 추정을 진행한다. 검증 단계에서는 온도에 따라 달라지는 배터리 특성을 고려하여, 다양한 주변 온도에서 결과를 확인하였다. 또 임베디드 환경에서 발생하는 오프셋 오류와 패킷 손실에 대비하여, 문제 상황에서 SOC 추정 성능을 검증하였다. 이를 통해 안정범위의 5%내의 오차를 갖는 실시간 SOC 추정이 가능한 임베디드 시스템 구현을 위한 전략을 제시한다.

• 방사성폐기물학회지
• /
• 제4권2호
• /
• pp.171-178
• /
• 2006

해체비용 산정은 원자력시설에 대한 해체 설계 및 계획 수립하는 데 중요한 기술이다. 해체비용 산정은 해체활동 단계와 해체시설의 구성요소에 맞게 해체작업을 분류하여 계산을 해야 한다. 본 논문에서는 원자력연구시설 해체비용 산정 기술로 이용하기 위하여 해체비용항목 및 그룹의 구성요소와 해체대상물에 대한 작업시간 계산의 기준이 되는 단위비용 인자 구성요소를 도출함으로써 해체비용 산정에 필요한 기본 구조를 완성하였다. 또한 주요 해체활동 및 작업에 대한 비용 산정 시 구성요소에 대한 고려사항을 살펴보았다. 향후, 이러한 기법을 이용하여 원자력연구시설에 대한 해체비용 산정 및 평가 방법론을 확립하는데 기본 기술로 활용할 예정이다.

• 전자공학회논문지B
• /
• 제33B권8호
• /
• pp.50-59
• /
• 1996

In this paper, a new hierarchical motion estiamtion scheme using the wavelet transformed multi-resolution image layers is proposed. Compared with the full search motion estimation method, the existing hierarchical methods remarkably reduce the amount of the computation but their efficiencies are depreciated by the local minima problem. In order to solve the local minima problem, the multi-resolution image layers are composed using the wavelet transform and the number of layers participated in the motion estimation for a block is determined by considering of its low band energy and higher band energy on the first wavelet transformed layer. The ratio between higher band energy and low band energy of each block is evaluated and in the case of the blocks which include relatively large higher band energy, the motion estimation is carried out in the high resolution layer. Otherwise, all layers are used. The final motion vectors are obtained in the first wavelet transformed layer. So less bits for motion vectors are transmitted, and the decomposition of received image using inverse wavelet transform decreases the blocking effect.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권8호
• /
• pp.374-383
• /
• 2001

This paper presents the torque estimation scheme by Energy Conversion Method (ECM) that can be applied to the torque control of switched reluctance motor. There are two types of torque estimation method by ECM. One is the method using mechanical output energy and another is that using co-energy. When the torque is estimated by ECM, the estimated flux linkage can be obtained by voltage equation and Luenberger observer. By comparing the torque estimated by ECM with that be FEM, we verify the feasibility of the proposed torque estimation by ECM.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.506-510
• /
• 2012

This study suggested an improved algorithm of urban energy consumption estimation on the urban planning stage which concerns calculation accuracy. The results are as follows. (1) Urban energy consumption was estimated and managed per unit space using E-GIS DB which contains facility information per mesh. (2) Urban energy consumption was reflected by the urban facility classified and standardized by the characteristics of energy use. (3) Calculation accuracy of energy consumption was approached by separately suggested as summer algorithm reflecting urban heat island on summer energy use and winter algorithm reflecting heating system normally used in Korea.

• 조명전기설비학회논문지
• /
• 제28권10호
• /
• pp.27-36
• /
• 2014

Network analysis applications in energy management systems play a key role in the economic and reliable operation of power systems. In order to provide operators with useful network information, the accurate results of topology processing, state estimation, power flow, and contingency analysis must be simulated. This paper proposes a validation methodology of network analysis applications in energy management systems. The energy management systems was checked to ensure that it meets the originally specified functions based on the proposed methodology. In addition, the performance of state estimation is evaluated with the reference of the proposed methodology. The proposed methodology is being conducted by energy management systems and the Korean power systems have been utilized for the test systems.