• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.220-221
• /
• 2014

Recently It has been required the research for the load of transport of the unit module to secure the safety of the transport locking device. So the purpose of this study is to analyze the probability distribution of the load of transport of unit modular when transporting unit modular by vehicle.

• 한국전문물리치료학회지
• /
• 제17권3호
• /
• pp.1-10
• /
• 2010

The purpose of this study was to measure intra-rater and inter-rater reliability and range of motion for measurement of passive shoulder internal rotation range of motion and to compare anterior glide distance of humeral head in three methods. Fifty healthy subjects and fifty patients with shoulder musculoskeletal pain were recruited for this study. The subjects' passive shoulder internal rotation range of motion was measured by visual estimation, manual stabilization, and pressure biofeedback unit methods. In two trials, measurements were performed on each subject by two examiners. Intraclass correlation coefficient (ICC(3,1)) was used to determine the reliability of each measurement. The intra-rater reliability of the three methods was excellent (ICC=.77~.93) in both groups. The inter-rater reliability of the visual estimation method was poor (ICC=.20, .29), the manual scapular stabilization method was poor and fair (ICC=.09, .50), and the pressure biofeedback unit method was excellent (ICC .86, .75) in the experimental and control groups. In the experimental group, the difference of examined range of motion by each examiner was significant in the visual estimation method and manual scapular stabilization method, but there was an insignificant difference between the groups is the pressure biofeedback unit method. This result suggests that the intra-rater and inter-rater reliability of a pressure biofeedback unit was better than the other methods. The difference in distance of the anterior glide of humeral head was insignificant among all the methods. The pressure biofeedback unit method was the most reliable method, so it is proposed to be a new and reliable method to measure internal rotation range of motion.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1049-1053
• /
• 1999

It is important to measuring and monitoring about state vectors of power system for precise operation control. All state vectors cannot be measured because it is economically disadvantageous, so that some state vectors are determined using state estimator. Determination of observability is a important precondition of power system state estimation because state estimation can be performed when given power system is observable. Recently as time-synchronization technique progress, using the PMU(Phasor Measurement Unit), state vector can be measured directly so that voltage phasor and current phasor measurements can be used for power system estimation. In this paper, observability algorithm is proposed to determinate the observability with real/reactive injection power measurements and real/reactive lineflow power measurements of existing measurement system and with phasor measurements of PMU. The jacobian matrix is newly composed for state estimation with measurements of added PMU, and state estimation is performed with least square estimatior. Comparison between state estimation result of existing measurement system and that of measurement system added PMU is presented.

• 한국습지학회지
• /
• 제18권3호
• /
• pp.226-231
• /
• 2016

토지이용에 따른 수질에 미치는 영향을 파악하기 위해서는 토지피복기반의 토지계 발생부하 원단위가 필요하다. 실측자료를 기반으로 토지피복기반 원단위를 도출하기에는 많은 인력과 시간을 필요로 한다. 이에 본 연구에서는 최적화를 통해 토지피복기반의 원단위 도출 방법을 제안하였다. 최적화란 주어진 조건 안에서 가장 좋은 최적해를 구하는 과정이며, 본 연구에서는 상용 프로그램인 Microsoft Excel에서 제공하고 있는 Excel Solver를 이용하여 최적화를 수행하였다. 공주시와 서천군의 2010년 위성영상 기반으로 작성된 2012년 환경부 중분류 토지피복도를 활용하여, BOD, T-N, T-P에 대한 토지피복기반 원단위를 도출하였다. 본 연구에서 수행한 토지피복기반 원단위 산정 연구는 국토 이용에 따른 오염원 발생변화를 보다 명확히 판별할 수 있을 것으로 판단된다.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.77-81
• /
• 2015

The unit price contracting is the standard contracting method for highway projects in the U.S. As a result, state highway agencies have collected a large amount of historical bid data that they can use to determine engineer's estimates for future projects. The estimator must carefully consider various characteristics of a new project such as its location to determine an engineer's estimate as accurate as possible before bid letting. Higher cost estimates can result in the loss of the available budget and lower cost estimates may lead to deferral and delay of projects. The study uses the historical bid data obtained from Iowa Department of Transportation and develops a Geographic Information System (GIS) tool to visually show the variation of unit prices over the map using a spatial interpolation technique. The interpolation map can be used to estimate the unit price of the item at any location across Iowa. This noble method allows the estimator to effectively and fully utilize the historical bid data in a very time efficient manner and determine more accurate cost estimation.

• 한국멀티미디어학회논문지
• /
• 제11권2호
• /
• pp.182-196
• /
• 2008

센서 네트워크를 이용한 위치 추정은 많은 연구가 되어왔다. 실내 혹은 실외에서 위치추정 방식의 차이를 고려한 방법이 연구되고 있다. 실외의 위치 추정에서 RSSI(Received Signal Strength Indication) 값을 통하여 단일 시간 동안 일정하게 한 분포를 가지기 때문에 추론이 가능하지만, 실내는 다중경로와 간섭이 실외보다 높고, 그 밖에 다른 변수로 인해 추론하기가 어렵다. 논문에서는 이동평균과 K-means 알고리즘을 통해 다중경로와 간섭으로 변화된 RSSI 정보를 보정하고, 단일 시간 동안 수신된 수신신호의 집단에서 신뢰성을 가진 RSSI의 값에 대한 추론을 제안한다. 또한 위치추정에서 보정노드를 이용하여 네트워크에 속한 고정 노드에 가중치를 두는 방법을 제안하고, 네트워크 재설정을 통해 기존의 방식을 시스템 상에서 새롭게 구현하여 위치인지에 대한 효율성을 비교 평가한다.

• Communications for Statistical Applications and Methods
• /
• 제15권5호
• /
• pp.719-726
• /
• 2008

In this paper we consider a joint test for seasonal cointegrating(CI) ranks that enables us to simultaneously model cointegrated structures across seasonal unit roots in seasonal cointegration. A CI rank test for a single seasonal unit root is constructed and extended to a joint test for multiple seasonal unit roots. Their asymptotic distributions and selected critical values for the joint test are obtained. Through a small Monte Carlo simulation study, we evaluate performances of the tests.

• Communications for Statistical Applications and Methods
• /
• 제10권3호
• /
• pp.665-678
• /
• 2003

In this paper we suggest the new calibration estimator, which is called to the recalibration estimator, and its variance estimator using two-phase sampling technique according to the auxiliary information having strong correlation with the variable of interest under the unit nonresponse. In this unit nonresponse situation, an available information may exists at the level of whole population or the first-phase sample. The proposed recalibration estimator derives from the first and second phase weights respectively.

• 한국정밀공학회지
• /
• 제30권4호
• /
• pp.383-389
• /
• 2013

Demand for high-rising building has arisen. However, its maintenance is usually executed by labour. It could have a severe problem. We proposed a gondola robot to solve it. In this paper, we designed a height estimation sensor for this gondola. It is consist of pan-tilt unit, ARS sensor, and laser sensor. The pan-tilt unit keeps the laser sensor to indicate the gravity direction by referencing the ARS. The laser sensor's range is vertical distance from gondola to ground. However, if there is an obstacle under the gondola, the distance includes its height. To filter it out, we apply a Kalman filter for the height estimation. If the estimated height is changed extremely, the filter decides that there is an obstacle. Then, it remembers the height of obstacle. Other extreme changes of height estimations are reflected. The experimental results using the proposed sensor system show detail flow of the height estimation.

• KIEAE Journal
• /
• 제10권1호
• /
• pp.57-64
• /
• 2010

Electric energy is indispensible of the development of the industrial and living sector. Among the energy sectors, the building area shares 20% of the produced electric power in Korea. As we plan to supply the apartment, we need to forecast the required amount of the electric energy and supply the infrastructure to apartment for the lighting, cooling. Nonetheless, it is not easy to forecast the required amount of the electric energy, considering the management aspect, building physical aspect and social-geographic aspect. In this paper, it studied the estimation model of the electric energy, reflecting the affecting variables such as total area, number of household, geography and so on. The estimation model is proposed in 3-types which explained in central heating, individual heating and district heating, and each type have two estimation model, reflecting the affecting variable and corelation between variables to eliminate the muticolinearity. The unit of electric energy consumption per area and year is similar in three heating type and the results are as follows; the central heating is $34.446kWh/yr{\cdot}m^2$, individual type is $35.756446kWh/yr{\cdot}m^2$ and district heating is $34.285446kWh/yr{\cdot}m^2$.