• Proceedings of the KIEE Conference
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.1940-1942
• /
• 2001

Magnetic Levitation System(MLS) levitates a steel ball to the desired position in the gravity field using electromagnetic force. MLS consists of light sensor to measure the position of steel ball and an electromagnet to control the position of the ball, that composes a feedback control system. This work does not use a steel ball with constant mass but variable mass steel balls as magnetic levitation targets. Differential equation of electric circuit for electromagnet and motion equation of the movement of steel ball are derived for modeling nonlinear system, that will be linearized at the nominal operating point. We propose a digital control that can levitate a steel ball of which weight is not known for ED-4810 system. Algorithm for estimating ball weight and feedback control are implemented in digital scheme under pentium PC equiped with A/D and D/A converter, ACL-8112, using C-language. Simulation and experimental results are given to show the usefulness of the proposed controller.

• Journal of Pharmaceutical Investigation
• /
• 제30권4호
• /
• pp.295-297
• /
• 2000

A new method to evaluate erosion of biodegradable polymer, polyanhydrides, was developed. The polymer devices were prepared with the melt-casting method and weight loss was accurately measured after agitating the devices in buffers (pH 1-9), and removing the device at selected time intervals and freeze-drying the device. The erosion rate was estimated from the plot of the weight loss(%) of device as a function of time. The freeze-drying technique used in this study is particularly useful for estimating the erosion rate of biodegradable polymer.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• 제19권6호
• /
• pp.746-752
• /
• 2010

Rib structure has been used to bed and column of machine tool to heighten weight stiffness ratio, cost performance and weight saving. In this paper the bed rib structure was estimated with thermal characteristics. Using superposition principle, machine tool designer can describe every complicated heat generation in the machine tool thermal source. As thermal characteristics, thermal deformation of guide rail and column and Maximum-minimum temperature variation were selected. The size, configuration and direction against the thermal loading surface operated to the thermal characteristics. The DB chart was made following rib structure estimating thermal characteristics. With superposition principle and DB chart, machine tool designer can prognosticate the thermal characteristics without FEM analysis to every bed rib structure.

• Journal of Welding and Joining
• /
• 제18권5호
• /
• pp.33-40
• /
• 2000

Fatigue crack propagation life of weld toe crack through residual stress field was estimated with Elber's crack concept. Propagation of weld toe crack is heavily influenced by residual stress caused by welding process, so it is essential to take into account the effect of residual stress on the propagation life of weld toe crack. Fatigue crack at transverse and longitudinal weld toe was studied respectively, which represent typical weld joint in ship structure. Numerical and experimental studies are performed for both cases. Residual stress near weldment was estimated through nonlinear thermo-elasto-plastic finite element method, and residual stress intensity factor with Glinka's weight function method. Effective stress intensity factor was calculated with Newman-Forman-de Koning-Henriksen equation which is based on Dugdale strip yield model in estimating crack closure level U at different stress ratio. Calculated crack propagation life coincided well with experimental results.

• Journal of the Korean Society of Costume
• /
• 제58권9호
• /
• pp.29-37
• /
• 2008

The purpose of this study was to investigate insulation of thermal clothing under still and dynamic air conditions(with 2.1m/sec air velocity) and decrease of insulation in both conditions, to analyze correlations among them, and to estimate insulation and decrease of insulation using factors, such as fabric insulation, fabric weight, clothing weight, air permeability, and water vapor resistance. A total of 25 kinds of clothing were tested(9 types for suits, 6 types of jacket, 5 types for shirts, and 5 types for trousers). The results of this study were as follows; Thermal resistance of clothing under the dynamic air condition decreased comparing to that of clothing under still air condition in all types of clothing. Decrease in shirts was the biggest(47.5%), followed by suits(39.51%), trousers(37.48%), and jackets(34.49%) in sequence. Thermal resistance of clothing under dynamic air condition showed very high correlation(0.98, p<0.01) with that of clothing under still air condition, followed by thermal resistance of fabric(0.86, p<0.01). Decrease in thermal resistance of clothing showed the highest correlation with air permeability. It didn't show correlation with other factors. Regression analysis showed that fabric thickness would be useful factor for estimating thermal resistance of clothing and air permeability also would be useful factor for estimating decrease in thermal resistance of clothing.

• Korean Journal of Veterinary Research
• /
• 제36권3호
• /
• pp.731-741
• /
• 1996

ELISA kit for cortisol was developed and then evaluated. Polyclonal antihydrocortisone-3-(o-carboxymethyl)oxime BSA rabbit serum was used to coat the 96-well microplates. The minimum detection limit of the kit was 250pg of cortisol per milliliter. The within-run variation and the day to day variation of the ELISA system were 2.0 and 5.9 at maximum, respectively. The kit was used to determine whether salivary cortisol concentration could replace blood cortisol concentration in dexamathasone suppression test of dogs. Changes of cortisol concentration were measured in serum or saliva after intravenous administration of 0.01mg of dexamethasone per kilogram of body weight. Blood alone, saliva alone or both were collected at 0, 30, 60, 120, 240, and 360 minutes after injection of dexamethasone. The change in blood cortisol concentration was found to be suitable in dexamathasone suppression test of dogs, but the change in salivary cortisol concentration was not. The kit was also used to determine whether salivary cortisol concentration could be a stress index as well as blood cortisol concentration in dogs. Two types of trial were performed to estimate the stress either by blood or salivary cortisol concentration. The first trial was stress experiment by intravenous injection of 0.2IU of PZI-insulin per kilogram body weight. Either blood alone or saliva alone was collected at 0, 30, 60, and 90 minutes after insulin administration. Both blood and salivary cortisol concentration were found to be suitable index in estimating stress from hypoglycemia by injection of insulin. The second trial was stress experiment by electrical irritation. The dogs were irritated with anti-bark device for 10 seconds. Blood was collected before and at 2 and 5 minutes after electrical irritation. Saliva was collected before and at 3 and 6 minutes after electrical irritation. The blood cortisol concentration, but not the salivary cortisol concentration was found to be suitable index in estimating stress from electrical irritation. Cushing syndrome in a dog was also successfully diagnosed with this kit.

• Korean Journal of Soil Science and Fertilizer
• /
• 제47권2호
• /
• pp.85-91
• /
• 2014

Ground-based polarimetric scatterometers have been effective tools to monitor the growth of crop with multi-polarization and frequencies and various incident angles. An important advantage of these systems that can be exploited is temporal observation of a specific crop target. Polarimetric backscatter data at L-, C- and X-bands were acquired every 10 minutes. We analyzed the relationships between L-, C- and X-band signatures, biophysical measurements over the whole corn growth period. The Vertical transmit and Vertical receive polarization (VV) backscattering coefficients for all bands were greater than those of the Horizontal transmit and Horizontal receive polarization (HH) until early-July, and then thereafter HH-polarization was greater than VV-polarization or Horizontal transmit and Vertical receive polarization (HV) until the harvesting stage (Day Of Year, DOY 240). The results of correlation analysis between the backscattering coefficients for all bands and corn growth data showed that L-band HH-polarization (L-HH) was the most suited for monitoring the fresh weight ($r=0.95^{***}$), dry weight ($r=0.95^{***}$), leaf area index ($r=0.86^{**}$), and vegetation water content ($r=0.93^{***}$). Retrieval equations were developed for estimating corn growth parameters using L-HH. The results indicated that L-HH could be used for estimating the vegetation biophysical parameters considered here with high accuracy. Those results can be useful in determining frequency and polarization of satellite Synthetic Aperture Radar stem and in designing a future ground-based microwave system for a long-term monitoring of corn.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제31권4D호
• /
• pp.511-518
• /
• 2011

Truck weight data are essential for road infrastructure design, maintenance and management. WIM (Weigh-In-Motion) system provides highway planners, researchers and officials with statistical data. Recently high speed WIM data also uses to support a vehicle weight regulation and enforcement activities. This paper aims at developing axle load estimating models with high speed WIM data collected from national highway. We also suggest a method to estimate axle load using simple regression model for WIM system. The model proposed by this paper, resulted in better axle load estimation in all class of vehicle than conventional model. The developed axle load estimating model will used for on-going or re-calibration procedures to ensure an adequate level of WIM system performance. This model can also be used for missing axle load data imputation in the future.

• Steel and Composite Structures
• /
• 제38권5호
• /
• pp.599-615
• /
• 2021

The ultimate strength behaviour of sandwich composite beams with J-hooks and normal weight concrete (SCSSBJNs) are studied through two-point loading tests on ten full-scale SCSSBJNs. The test results show that the SCSSBJN with different parameters under two-point loads exhibits three types of failure modes, i.e., flexure, shear, and combined shear and flexure mode. SCSSBJN failed in different failure modes exhibits different load-deflection behaviours, and the main difference of these three types of behaviours exist in their last working stages. The influences of thickness of steel faceplate, shear span ratio, concrete core strength, and spacing of J-hooks on structural behaviours of SCSSBJN are discussed and analysed. These test results show that the failure mode of SCSSBJN was sensitive to the thickness of steel faceplate, shear span ratio, and concrete core strength. Theoretical models are developed to estimate the cracking, yielding, and ultimate bending resistance of SCSSBJN as well as its transverse cross-sectional shear resistance. The validations of predictions by these theoretical models proved that they are capable of estimating strengths of novel SCSSBJNs.

• Journal of Nutrition and Health
• /
• 제18권2호
• /
• pp.98-114
• /
• 1985

In the previous studies, one of our author had observed the obligatory nitrogen losses through urine and feces in young Korean male adults, and utilization of whole egg protein in Korean young adults with ordinary intake of energy as a basic study for estimating protein requirements of Korean. This study has tried to determine the protein requirement and utilization when subjects ate the Korean mixed diet at the energy level of 45 kcal per Kg body weight per day. Six healthy Korean young female adults, college students, aged $20{\sim}25$ years old, and $45{\sim}61Kg$ of body weight participated as the study subjects. They were given isocaloric diets with four different protein levels for five days each successively. These diets contained protein levels of 0.45, 0.60, 0.75 and 0.90g per Kg of body weight per day, respectively. It was attempted to observe energy and protein intake, urinary and fecal nitrogen losses, true digestibility of protein, net protein utilization of protein in the body over last two days of period of eating each diet and nitrogen balances were calculated. The body weight change and hematological observation were also performed. The results obtained were summarized as follows ; 1) True digestibility of protein of Korean mixed diets ranged from 83.1% to 86.5% and the average of which was $84.7{\pm}1.7%$. 2) Net protein utilization rate of Korean mixed diets was range of 49% to 55% and the average of which was $52{\pm}3%.$ 3) The body weight of subjects were slightly increased and the values of hemoglobin and hematocrit of the blood were also little increased during the experimental periods of twenty days. 4) Protein requirements of Korean mixed diet with the energy level of 45 kcal/Kg body weight per day of Korean young female adults were estimated as 1.00g/Kg/day on this experimental condition.