• Journal of Korean Society for Atmospheric Environment
• /
• v.15 no.6
• /
• pp.779-789
• /
• 1999

To support daily ground-level $O_3$ forecasting in Seoul, a transfer function model(TFM) has been developed by using surface meteorological data and pollutant data(previous-day [$O_3$] and [$NO_2$]) from 1 May to 31 August in 1997. The forecast performance of the TFM was evaluated by statistical comparison with $O_3$ concentration observed during September it is shown that correlation coefficient(R), root mean squared error(RMSE), normalized mean squared error(NMSE) and mean relative error(MRE) were 0.73, 15.64, 0.006 and 0.101, respectively. The TFM appeared to have some difficulty forecasting very high $O_3$ concentrations. To compare with this model, multiple regression model(MRM) was developed for the same period. According to statistical comparison between the TFM and MRM. two models had similar predictive capability but TFM based on $O_3$ concentration higher than 60 ppb provided more accurate forecast than MRM. It was concluded that statistical model based on TFM can be useful for improving the accuracy of local $O_3$ forecast.

• East Asian mathematical journal
• /
• v.30 no.4
• /
• pp.451-474
• /
• 2014

The purpose of this study is to analyze error patterns third-year middle school students make on quadratic function graph problems and to examine about the possible correct them by providing supplementary tutoring. To exam the error patterns that occur during problem solving processes, to 82 students, We provided 25 quadratic function graph problems in the preliminary-test. The 5 types of errors was conceptual errors, false intuition errors, incorrect use of conditions in problems, technical errors, and errors from slips or carelessness. Statistical analysis of the preliminary-test and post-test shows that achievement level was higher in the post-test, after supplementary tutoring, and the t-test proves this to be meaningful data. According to the per subject analyses, the achievement level in the interest of symmetry, parallel translation, and general graph, respectively, were all higher in the post-test than the preliminary-test and this is meaningful data as well. However, no meaningful relation could be found between the preliminary-test and the post-test on other subjects such as graph remodeling and relations positions of the parabola. For the correction of errors, try the appropriate feedback and various teaching and learning methods.

• English Language & Literature Teaching
• /
• v.15 no.4
• /
• pp.237-264
• /
• 2009

The present study explores patterns of teachers' corrective feedback and learners' uptake in Korean EFL undergraduate classroom setting. It also examines consistencies and discrepancies in the perception of corrective feedback by teachers and learners. Teachers' and learners' preferences and perception of corrective feedback are further analyzed to determine whether or not those differ from actual practices in English language learning classrooms. The results of the study are as follows. First of all, teachers' corrective feedback type varied according to the learners' error type and English proficiency level. There was a lack of consistency between the teachers' feedback practices and the learners' error types. Second, for the phonological errors, learners' data witnessed the most frequent uptake on recast. For the other error types, however, the learners' uptake rates were high for the explicit corrective feedback. Third, the teachers' explicit knowledge of corrective feedback was rather low and the preferences differed from teacher to teacher. The teachers' feedback perception and preferences did not consistently reflect their actual practices. Finally, patterns of the learners' expectations of corrective feedback varied according to learners' proficiency level. Teachers' and learners' expectations of corrective feedback were also compared and some mismatches were detected.

• ETRI Journal
• /
• v.28 no.5
• /
• pp.684-687
• /
• 2006

In this letter, we evaluate the system performance of a space-time block coded (STBC) multicarrier (MC) DS-CDMA system over a time selective fading channel, with imperfect channel knowledge. The average bit error rate impairment due to imperfect channel information is investigated by taking into account the effect of the STBC position. We consider two schemes: STBC after spreading and STBC before spreading in the MC DS-CDMA system. In the scheme with STBC after spreading, STBC is performed at the chip level; in the scheme with STBC before spreading, STBC is performed at the symbol level. We found that these two schemes have various channel estimation errors, and that the system with STBC before spreading is more sensitive to channel estimation than the system with STBC after spreading. Furthermore, derived results prove that a high spreading factor (SF) in the MC DS-CDMA system with STBC before spreading leads to high channel estimation error, whereas for a system with STBC after spreading this statement is not true.

• Journal of Positioning, Navigation, and Timing
• /
• v.3 no.4
• /
• pp.163-170
• /
• 2014

A pseudolite is used as a GPS backup system, and is also used for the purpose of indoor navigation and correction information transmission. It is installed on the ground, and transmits signals that are similar to those of a GPS satellite. In addition, in recent years, studies on the improvement of positioning accuracy using the pseudorange measurement of a pseudolite have been performed. As for the effect of the time synchronization error between a pseudolite and a GPS satellite, a time synchronization error of 1 us generally induces a pseudorange error of 300 m; and to achieve meter-level positioning, ns-level time synchronization between a pseudolite and a GPS satellite is required. Therefore, for the operation of a pseudolite, a time synchronization algorithm between a GPS satellite and a pseudolite is essential. In this study, for the time synchronization of a pseudolite, "a pseudolite time synchronization method using the time source of UTC (KRIS)" and "a time synchronization method using a GPS timing receiver" were introduced; and the time synchronization performance depending on the pseudolite time source and reference time source was evaluated by designing a software-based pseudolite time synchronization performance evaluation simulation platform.

• Structural Engineering and Mechanics
• /
• v.86 no.5
• /
• pp.621-633
• /
• 2023

Stability analysis and support system estimation of the Beheshtabad water transmission tunnel is investigated in this research. A combination approach based on the rock mass rating (RMR) and rock mass quality index (Q) is used for this purpose. In the first step, 40 datasets related to the petrological, structural, hydrological, physical, and mechanical properties of tunnel host rocks are measured in the field and laboratory. Then, RMR, Q, and height of influenced zone above the tunnel roof are computed and sorted into five general groups to analyze the tunnel stability and determine its support system. Accordingly, tunnel stand-up time, rock load, and required support system are estimated for five sorted rock groups. In addition, various empirical relations between RMR and Q i.e., linear, exponential, logarithmic, and power functions are developed using the analysis of variance (ANOVA). Based on the significance level (sig.), determination coefficient (R²) and Fisher-test (F) indices, power and logarithmic equations are proposed as the optimum relations between RMR and Q. To validate the proposed relations, their results are compared with the results of previous similar equations by using the variance account for (VAF), root mean square error (RMSE), mean absolute percentage error (MAPE) and mean absolute error (MAE) indices. Comparison results showed that the accuracy of proposed RMR-Q relations is better than the previous similar relations and their outputs are more consistent with actual data. Therefore, they can be practically utilized in designing the tunneling projects with an acceptable level of accuracy and reliability.

• Current Optics and Photonics
• /
• v.7 no.4
• /
• pp.387-397
• /
• 2023

Tooth surface shape error is an important parameter in gear accuracy evaluation. When tooth surface shape error is measured by laser interferometry, the gear interferogram is highly distorted and the gray level distribution is not uniform. Therefore, it is important for gear interferometry to extract the foreground region from the gear interference fringe image directly and accurately. This paper presents an approach for foreground extraction in gear interference images by leveraging the sinusoidal variation characteristics shown by the interference fringes. A gray level mask with an adaptive threshold is established to capture the relevant features, while a local variance evaluation function is employed to analyze the fluctuation state of the interference image and derive a repair mask. By combining these masks, the foreground region is directly extracted. Comparative evaluations using qualitative and quantitative assessment methods are performed to compare the proposed algorithm with both reference results and traditional approaches. The experimental findings reveal a remarkable degree of matching between the algorithm and the reference results. As a result, this method shows great potential for widespread application in the foreground extraction of gear interference images.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.7
• /
• pp.1290-1294
• /
• 2008

We present a novel deblurring algorithm for bi-level images blurred by some parameterizable point spread function. The proposed method iteratively searches unknown parameters in the point spread function and noise-to-signal ratio by minimizing an objective function that is based on the binariness and the difference between two intensity values of restoring image. In simulations and experiments, the proposed method showed improved performance compared with the Wiener filtering based method in terms of bit error rate after segmentation.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.1
• /
• pp.45-56
• /
• 2015

In this paper, we present a method that can detect context-sensitive word errors and generate correction candidates. Spelling error detection is one of the most widespread research topics, however, the approach proposed in this paper is adjusted for an automated English scoring system. A common strategy in context-sensitive word error detection is using a pre-defined confusion set to generate correction candidates. We automatically generate a confusion set in order to consider the characteristics of sentences written by second-language learners. We define a word error that cannot be detected by a conventional grammar checker because of part-of-speech ambiguity, and propose how to detect the error and generate correction candidates for this kind of error. An experiment is performed on the English writings composed by junior-high school students whose mother tongue is Korean. The f1 value of the proposed method is 70.48%, which shows that our method is promising comparing to the current-state-of-the art.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.829-832
• /
• 1991

Attitude and position parameter of satellite is needed in producing digital elevation model. This paper propose a method which determines the order of polynomial and initial values of satellite exteria parameters using header file of computer compatible tape. Experiments on a SPOT level 1A full science show that planimetric error is 11m and the altimetric error is about 18.3m.