• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.10-11
• /
• 2013

Green Frame is a column-beam system formed by composite precast concrete column and beam connected with steel buried in both members. During the installation of Green columns, the columns of Green Frame, covering 3 floors per each piece and beams, the eccentricity can be observed due to the construction error and the weight of beam itself. Such eccentricity may have a little influence on a single frame, yet, it can develop critical issues to the installation of subsequent beams or beams on the upper floors in the context of a building as a whole that has multiple frames. These issues lead to delay in frame installation, decrease of productivity and increase of cost, etc. Therefore, this study presents a steel-joint connection method in order to solve the issues. The steel-joint connection method exists on slope plane and reinforcing plate in steel frame buried in composite PC members. Through this method, the issues can be resolved without requiring additional equipment or manpower.

• Journal of Communications and Networks
• /
• 제13권3호
• /
• pp.205-210
• /
• 2011

This paper presents an approach to the construction of multiple-rate quasi-cyclic low-density parity-check (LDPC) codes. Parity-check matrices of the proposed codes consist of $q{\times}q$ square submatrices. The block rows and block columns of the parity-check matrix correspond to the hyperplanes (${\mu}$-fiats) and points in Euclidean geometries, respectively. By decomposing the ${\mu}$-fiats, we obtain LDPC codes of different code rates and a constant code length. The code performance is investigated in term of the bit error rate and compared with those of LDPC codes given in IEEE standards. Simulation results show that our codes perform very well and have low error floors over the additive white Gaussian noise channel.

• ETRI Journal
• /
• 제42권1호
• /
• pp.17-25
• /
• 2020

Multiple-input multiple-output systems can achieve a full sum rate (SR) via full duplex (FD). However, its performance is degraded by self-interference (SI) that occurs between the transmitter and receiver at the same node and thus is constrained by error floors. Conversely, half duplex (HD) can avoid the SI albeit at lower spectral efficiency, and the slope of its error curve is determined by the diversity order. In this study, a link selection scheme based on switching between FD and HD is examined as a simple method to improve the bit error rate (BER) performance of FD systems. In the proposed link selection algorithm, either FD or HD is selected based on the received minimum distance and signal-to-interference plus noise ratio. Simulation results indicate that the proposed hybrid FD/HD switching system offers significant BER performance improvement when compared with that of the conventional FD and FD based on only the received minimum distance under the same fixed SR. Under relatively sufficient SI cancellation, it is demonstrated to outperform the HD with a diversity advantage in low and medium signal-to-noise ratio region.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권3호
• /
• pp.183-189
• /
• 2020

In emergency rescue situations, the localization accuracy of the rescue requestor is a very important factor in determining the success or failure of the rescue. Indoors where Global Navigation Satellite System (GNSS) is not operated, there is no choice but to use Wi-Fi or LTE signals. However, the performance of the current emergency rescue system utilizing those RF signals is exceedingly low. In this study, the effectiveness of the surface correlation technology using the accumulated signal pattern of RF signals was verified in relation to the emergency localization technology. To validate the proposed system, we configured and tested an emergency rescue scenario in multi-floors building. When the emergency rescue was requested, it was confirmed that the initial localization error was large owing to the short length of the accumulated signal pattern. However, the localization error decreased over time, which eventually led to the accurate location information being delivered to the rescuer.

• 전산구조공학
• /
• 제7권4호
• /
• pp.137-144
• /
• 1994

기존 대형구조물의 안전진단에 관련하여 구조계의 동적계수를 실험적으로 추정하는 방법이 연구되었다. 시간영역방법인 순차적 예측오차방법과 주파수영역의 방법인 주파수응답함수 추정법이 비교검토되었다. 기법의 검증은 2 Bay 3층 구조물 모형에 대해서 수행되었는데, 각 실험적 방법에 의한 추정결과는 일관된 추정치를 보이었다. 그러나, 유한요소법에 의한 결과와는 차이를 보이었다. 이 차이는 구조해석시 절점조건에 대한 부적절한 모형화에 기인한 것으로 사료된다.

• Journal of Construction Engineering and Project Management
• /
• 제4권4호
• /
• pp.9-16
• /
• 2014

The purpose of this paper is to develop a model for forecasting early design construction cost of building projects using Artificial Neural Network (ANN). Eighty questionnaires distributed among construction organizations were utilized to identify significant parameters for the building project costs. 169 case studies of building projects were collected from the construction industry in Gaza Strip. The case studies were used to develop ANN model. Eleven significant parameters were considered as independent input variables affected on "project cost". The neural network model reasonably succeeded in estimating building projects cost without the need for more detailed drawings. The average percentage error of tested dataset for the adapted model was largely acceptable (less than 6%). Sensitivity analysis showed that the area of typical floor and number of floors are the most influential parameters in building cost.

• 토지주택연구
• /
• 제12권4호
• /
• pp.93-101
• /
• 2021

국내 소규모 가구가 점차적으로 증가함에 따라 소규모 가구를 위한 주거공급 정책에 대한 중요성이 높아지고 있다. 이러한 중요성에 따라 정부에서는 소규모 가구를 위한 도시형 생활주택을 지속적으로 공급해오고 있다. 도시형 생활주택은 공동주택, 일반 업무시설과 동일하게 분양 및 임대 사업이므로 발주자는 프로젝트 기획단계에서 적정공사기간을 산정하는 것은 중요하다. 그러나, 선행연구에서는 대규모 건축물의 공사기간을 산정할 수 있는 모델이 존재하나 도시형 생활주택과 같은 소규모 건축물에 대한 적정 공사기간 산정 모델은 부재한 것으로 분석되었다. 따라서 본 연구의 목적은 기획단계에서 발주자가 적정 공사기간을 산정할 수 있는 다중 회귀분석 기반 도시형 생활주택의 공사기간 산정 모델을 개발 및 검증하는 것이다. 개발된 모델에 입력되는 독립변수는 연면적, 수도권, 지하층수, 지상층수, 주 건축물 수, 강원권의 총 6개이며, 개발된 모델의 수정된 결정계수(R_a²)는 0.547로 분석되었다. 개발된 모델의 성능은 RMSE의 경우 171.26일, MAPE의 경우 26.53%로 도출되었다. 본 연구를 통해 개발된 모델은 발주자에게 신뢰성 있는 공사기간 산정 결과를 제공할 수 있을 것으로 기대된다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권11호
• /
• pp.5370-5393
• /
• 2019

In this paper, we consider a two-way relay non-orthogonal multiple access (TWR-NOMA) system with residual hardware impairments (RHIs) and channel estimation errors (CEEs), where two group users exchange their information via the decode-and-forward (DF) relay by using NOMA protocol. To evaluate the performance of the considered system, exact analytical expressions for the outage probability of the two groups users are derived in closed-form. Moreover, the asymptotic outage behavior in the high signal-to-noise ratio (SNR) regime is examined and the diversity order is derived and discussed. Numerical simulation results verify the accuracy of theoretical analyses, and show that: i) RHIs and CEEs have a deleterious effects on the outage probabilities; ii) CEEs have significant effects on the performance of the near user; iii) Due to the RHIs, CEEs, inter-group interference and intra-group interference, there exists error floors for the outage probability.

• 제어로봇시스템학회논문지
• /
• 제12권10호
• /
• pp.968-974
• /
• 2006

We are moving into the era of ubiquitous computing. Ubiquitous Sensor Network (USN) is a base of such computing paradigm, where recognizing the identification and the position of objects is important. For the object identification, RFID tags are commonly used. For the object positioning, use of sensors such as laser and ultrasonic scanners is popular. Recently, there have been a few attempts to apply RFID technology in robot localization by replacing the sensors with RFID readers to achieve simpler and unified USN settings. However, RFID does not provide enough sensing accuracy for some USN applications such as robot navigation, mainly because of its inaccuracy in distance measurements. In this paper, we describe our approach on achieving accurate navigation using RFID. We solely rely on RFID mechanism for the localization by providing coordinate information through RFID tag installed floors. With the accurate positional information stored in the RFID tag, we complement coordinate errors accumulated during the wheel based robot navigation. We especially focus on how to distribute RFID tags (tag pattern) and how many to place (tag granularity) on the RFID tag-floor. To determine efficient tag granularities and tag patterns, we developed a simulation program. We define the error in navigation and use it to compare the effectiveness of the navigation. We analyze the simulation results to determine the efficient granularities and tag arrangement patterns that can improve the effectiveness of RFID navigation in general.

• Journal of Communications and Networks
• /
• 제13권5호
• /
• pp.421-427
• /
• 2011

Problems encountered in IEEE 802.11 medium access control (MAC) design are interferences from neighboring or hidden nodes and collision from simultaneous transmissions within the same contention floors. This paper presents the selective decoding schemes in MAC protocol for multiple input multiple output ad-hoc networks. It is able to mitigate interferences by using a developed minimum mean-squared error technique. This interference mitigation combined with the maximum likelihood decoding schemes for the Alamouti coding enables the receiver to decode and differentiate the desired data streams from co-channel data streams. As a result, it allows a pair of simultaneous transmissions to the same or different nodes which yields the network utilization increase. Moreover, the presented three decoding schemes and time line operations are optimally selected corresponding to the transmission demand of neighboring nodes to avoid collision. The selection is determined by the number of request to send (RTS) packets and the type of clear to send packets. Both theoretical channel capacity and simulation results show that the proposed selective decoding scheme MAC protocol outperforms the mitigation interference using multiple antennas and the parallel RTS processing protocols for the cases of (1) single data stream and (2) two independent data streams which are simultaneously transmitted by two independent transmitters.