• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.7
• /
• pp.90-97
• /
• 1989

In this paper, we have taken the formation of two-dimension codeword named doubly-encoded code using the Reed-Solomon code, C1(32, 28) with minimum distance 5 and C2(32, 26) with minimum distance 7 and we have had computer simulation of these error correcting processes using modeled R-DAT (Rotationary Digital Audio Tape). As the result, the error rate per symbol has been decreased about 0.05 and on these processes, the newly developed digital signal processing technology such as erro correction using Berlekamp-Massey algorithm in frequency domain have been proven.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.4
• /
• pp.430-435
• /
• 2018

In this paper, an improved decoding scheme for low-complexity parity-check(LCPC) code with small code length is proposed. The LCPC code is less complex than the turbo code or low density parity check(LDPC) code and requires less memory, making it suitable for communication between internet-of-things(IoT) devices. The IoT devices are required to have low complexity due to limited energy and have a low end-to-end delay time. In addition, since the packet length to be transmitted is small and the signal processing capability of the IoT terminal is small, the LCPC coding system should be as simple as possible. The LCPC code can correct all single errors and correct some of the two errors. In this paper, the proposed decoding scheme improves the bit error rate(BER) performance without increasing the complexity by correcting both errors using the soft value of the modulator output stage. As a result of the simulation using the proposed decoding scheme, the code gain of about 1.1 [dB] was obtained at the bit error rate of $10^{-5}$ compared with the existing decoding method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1355-1359
• /
• 2004

The two way subscriber transmission systems have tendency to spread its carrier frequency bandwidth or information bit rate and average bit error rate according to popularization of high speed information through the digital communication system, transmission medium and the Internet. This fact is an important incentive to realize new systems. These two way subscriber transmission systems usually use same cable or same carrier frequency bandwidth for up stream channel and down stream channel. In the systems, the disturbances of noise, crosstalk or fading affect the characteristics. Specifically, these disturbances cause the decrease of information bit rate and degradation of transmission quality. This paper proposes the improved method of their degradations using the particular feature of two way subscriber transmission systems and it makes clear proposed method is effective by theoretically and some numerical examples.

• Journal of Semiconductor Engineering
• /
• v.1 no.2
• /
• pp.74-80
• /
• 2020

Due to its superior error correcting performance with affordable hardware complexity, the Polar code becomes one of the most important error correction codes (ECCs) and now intensively examined to check its applicability in various fields. However, Successive Cancellation (SC) decoding that brings the advanced Successive Cancellation List (SCL) decoding suffers from the long latency due to the nature of serial processing limiting the practical implementation. To mitigate this problem, many decoding architectures, mainly divided into pruning and parallel decoding, are presented in previous manuscripts. In this paper, we compare the recent SC decoding architectures and analyze them using a tree structure.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.4
• /
• pp.403-408
• /
• 2002

In this paper, the performance on the PN code acquisition of DS/CDMA system was analyzed using the Nakagami-m probability density function considered fading environment. The equations on detection probability, $P_D$ and false alarm probability, ($P_{FA}$, decision variables affecting the PN code acquisition time were derived and proved using simulation in order to analyze the performance. In conclusion, It was necessary increasing the gain of PLL for correcting phase errors and improving the acquisition performance of PN code in apply to the rake receiver.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8C
• /
• pp.1069-1075
• /
• 2004

In this paper, we show the equivalence between complementary code keying (CCK) codeword and coset of the first order Reed-Muller (RM) code with variables of three. The CCK codewords are Golay sequences which have peak-to-average power ratio (PAPR) of two at most and can correct one error. We propose a CCK-orthogonal frequency division multiplexing (OFDM) modem to reduce PAPR. Also, we present the performance improvement techniques by increasing the variables of four to correct three errors and reduce PAPR at least 9㏈ with this system. Although, two Fast Hadamard Transform (FHT) blocks of size 8 64 are required at the receiver, we reduce the complexity by using FHT blocks of size 8 64 and 2 4 without deteriorating the performance. We generalize our results that we may increase the variables of RM code to enhance the error correcting and PAPR reduction capabilities without increasing receiver's complexity.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.1
• /
• pp.10-17
• /
• 2007

Hierarchical modulation technology which can make the advanced T-DMB(terrestrial-digital multimedia broadcasting) system backward compatible with the conventional T-DMB system and provide high-rate and high-quality services is introduced in this paper. As additional data streams are embedded within the conventional data streams by the hierarchical modulation, the advanced T-DMB system can provide high-quality video service and more broadcasting service channels. In order to guarantee the quality of both the conventional and additional services powerful error correcting scheme is required. The error performance of advanced T-DMB system with hierarchical modulation is investigated and analyzed according to the various error correcting schemes in this paper.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.4C
• /
• pp.324-330
• /
• 2006

The next generation mobile communication systems require error correcting schemes that can be adaptable to various code rates and lengths with negligible performance degradation. Serial concatenated convolutional codes can be a good candidate satisfying these requirements. In this paper, we propose new rate-compatible punctured serial concatenated convolutional code (RCPSCCC) which performs better than the RCPSCCC proposed by Chandran and Valenti in the sense of the rate compatibility. These codes are evaluated and analyzed by using computer simulation and SNR evolution technique. As their application, Type-II hybrid automatic repeat request (HARQ) schemes using both RCPSCCCs are constructed and new RCPSCCC is shown to have better throughput.

• ETRI Journal
• /
• v.32 no.1
• /
• pp.93-101
• /
• 2010

A true random number generator (TRNG) is widely used to generate secure random numbers for encryption, digital signatures, authentication, and so on in crypto-systems. Since TRNG is vulnerable to environmental changes, a deterministic function is normally used to reduce bias and improve the statistical properties of the TRNG output. In this paper, we propose a linear corrector for secure TRNG. The performance of a linear corrector is bounded by the minimum distance of the corresponding linear error correcting code. However, we show that it is possible to construct a linear corrector overcoming the minimum distance limitation. The proposed linear corrector shows better performance in terms of removing bias in that it can enlarge the acceptable bias range of the raw TRNG output. Moreover, it is possible to efficiently implement this linear corrector using only XOR gates, which must have a suitable hardware size for embedded security systems.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.4 s.310
• /
• pp.73-79
• /
• 2006

Due to the powerful correcting performance, turbo codes have been adopted in many communication standards such as W-CDMA(Wideband Code Division Multiple Access), CDMA2000, etc., and implemented by hardware in many kind of fields. Although several hardware structures and improved algorithm have been proposed, these problems such as hardware area, operating speed and power consumption are still a major issue to be solved in practical implementations. In this paper, we designed the turbo-code decoder using MAX -SCALE operation derived from the posterior probability optimization. The proposed circuit has been measured their performance on Matlab and MaxPlusII and implemented on the FPGA As a result, when implementing the proposed algorithm on the FPGA, this circuit only occupies 616 logic elements. And comparing the performance with the MAP(Maxirnum a Posteriori) decoding algorithm, the operating speed was increased by about 40%(56.48MHz) and BER(Bit Error Rate) was increased by 6.12.