• 한국생산제조학회지
• /
• 제8권5호
• /
• pp.36-41
• /
• 1999

Although the problems of defects and nonmetallic inclusion in metal fatigue are very complicated it is particularly important to view these problems from the perspective that defects and inclusions are virtually equivalent to small cracks. This concept will help us to understand various fatigue phenomena caused by graphite of Ductile cast iron. Therefore in this study different ferrite-pearlite matrix structure and pheroidal ratio of graphite of 70%, 80% and 90% GCD40 , GCD45-2 series have been carried out rotary bending fatigue test estimated the maxi-mum size of graphite investigated correlation. It was concluded as follows : (1) in ductile cast iron which have various spheroidal ratio of graphite the fatigue limit C series of 90% spheroidal ratio of graphite is the highest. While A series of 70% spheroidal ratio of graphite is the lowest (2) fatigue limit was predicted by vickers hardness(Hv) of matrix {{{{ SQRT {area } }}}} of maximum size graphite inputting Murakami and Endo's formula.

• Spatial Information Research
• /
• 제21권2호
• /
• pp.55-71
• /
• 2013

본 연구는 인간의 생리학적요소를 고려한 PET(Physiologically Equivalent Temperature)를 산정하여 수도권 신도시(분당, 일산, 동탄1)의 열쾌적성을 평가하였다. 또한 선행연구 고찰을 통해 열쾌적성과 관련된 도시공간요소들을 선정하고 회귀분석을 실시하여 PET와 도시공간요소들과의 관계를 분석하였다. 분석결과, 3개 신도시 중 계획단계에서 열섬 저감효과를 고려한 2기 신도시인 동탄1이 1기 신도시인 분당, 일산에 비해 열쾌적성이 우수한 것으로 나타났다. 불투수면적률, 용적률, 상업면적률, 주거면적률 등이 PET를 상승시키는 주요 변수로 분석되었으며 하천면적률, 식생활력도(NDV) 등이 PET를 저감시키는 것으로 나타났다. 본 연구는 위성영상 분석기법, 바람길 모델 등과 같은 GIS 공간분석기법을 복합적으로 활용하여 도시전체 공간을 대상으로 PET를 산정함으로써 열쾌적성을 과학적이고도 구체적으로 평가한 선험적 연구로서 의의를 지닌다. 또한, 본 연구를 통해 도출된 PET와 도시공간요소와의 관계분석 결과는 도시계획 수립단계에서 도시민의 열쾌적성을 제고할 수 있는 계획안 수립에 기여할 수 있을 것이다.

• 품질경영학회지
• /
• 제23권4호
• /
• pp.52-57
• /
• 1995

Testing problem of equality between two linear regressions is considered. Chow test is discussed and likelihood ratio test(LR test), F-test and Score test are derived. Score test are compared with other tests and show they are asymptotically equivalent.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.489-490
• /
• 2012

• Journal of the Korean Statistical Society
• /
• 제24권2호
• /
• pp.419-437
• /
• 1995

Given the specific mean shift outlier model, several standard approaches to obtaining test statistic for outliers are discussed. Each of these is developed in detail for the nonlinear regression model, and each leads to an equivalent distribution. The geometric interpretations of the statistics and accuracy of linear approximation are also presented.

• 한국지반공학회논문집
• /
• 제27권5호
• /
• pp.33-43
• /
• 2011

본 연구에서는 등가 지반면 스프링 모델을 적용한 단일 현장타설말뚝의 간편해석(기둥-말뚝의 상호작용을 고려한 분리해석)을 수행하였다. 이 때 지반조건, 하중, 말뚝직경 등의 영향인자에 따라 검증하였으며, 단일 현장타설말뚝에 적용된 철근량을 분석하여 말뚝의 최소 철근비 적용성을 평가하였다. 본 연구결과, 기존 기둥과 말뚝을 단일부재로 모델링하는 일체해석과 기둥-말뚝의 상호작용을 고려한 분리해석의 결과에는 서로 차이가 없었으며, 이를 통해 가상,고정점을 통한 해석법은 단일 현장타설말뚝의 정확한 거동파악이 어려움을 알 수 있었다. 또한 재료의 비선형성을 고려한 해석결과, 말뚝부에서 발생하는 휨모멘트는 말뚝재료의 균열모멘트 이내에서 모두 발생하였으며, 수평변위도 허용 수평변위 기준을 만족하는 것으로 나타났다. 따라서 단일 현장타설말뚝의 말뚝부에는 최소철큰비 기준인 0.4% 철근량만을 배근하여도 안정성이 확보되는 것을 알 수 있었으며, 기둥-말뚝의 상호작용을 고려한 분리해석은 상하부 일체해석으로 가는 중간단계의 비교적 정확하고 경제적인 설계법임을 알 수 있었다.

• 상하수도학회지
• /
• 제19권4호
• /
• pp.446-454
• /
• 2005

An economic treatment method to remove oxidized nitrogen from wastewater is biological denitrification with organic matters. Several organics can be used, however, methanol is commonly used. When methanol is provided, M:N (Methanol to Nitrogen) ratio is used to define methanol demand for denitrification. In this study, two artificial wastewaters were provided to a biological system to evaluate denitrification performance. Differences of influent total CODcr from effluent soluble CODcr were converted to methanol equivalent and oxidized nitrogen difference between influent and effluent were converted to nitrate equivalent to define M:N ratios. Modes I, II, III, I-1 and IV showed 5.1, 2.7, 3.3, 2.3 and 2.6 of M:N ratios, respectively. Since denitrifying microorganisms had to build a new metabolic system for methanol and influent organics, initial operation mode, Mode I, required more methanol and this resulted in high M:N ratios compared with later operation mode, Mode I-1. Salt in influent did not show inhibitory effects on denitrfication, although this was believed to increase effluent SS and soluble CODcr concentrations in Mode III, I-1 and IV, respectively. The concentrations of effluent soluble $COD_{Mn}$ did not changed much with influent salt.

• Steel and Composite Structures
• /
• 제37권4호
• /
• pp.391-404
• /
• 2020

Human-induced vibration could present a serious serviceability problem for large-span and/or lightweight floors using the high-strength material. This paper presents the results of heel-drop, jumping, and walking tests on a large-span composite steel rebar truss-reinforced concrete (CSBTRC) floor. The effects of human activities on the floor vibration behavior were investigated considering the parameters of peak acceleration, root-mean-square acceleration, maximum transient vibration value (MTVV), fundamental frequency, and damping ratio. The measured field test data were validated with the finite element and theoretical analysis results. A comprehensive comparison between the test results and current design codes was carried out. Based on the classical plate theory, a rational and simplified formula for determining the fundamental frequency for the CSBTRC floor is derived. Secondly, appropriate coefficients (β_rp) correlating the MTVV with peak acceleration are suggested for heel-drop, jumping, and walking excitations. Lastly, the linear oscillator model (LOM) is adopted to establish the governing equations for the human-structure interaction (HSI). The dynamic characteristics of the LOM (sprung mass, equivalent stiffness, and equivalent damping ratio) are determined by comparing the theoretical and experimental acceleration responses. The HSI effect will increase the acceleration response.

• 한국인터넷방송통신학회논문지
• /
• 제13권1호
• /
• pp.77-82
• /
• 2013

주기가 다른 격자들로 구성된 평면 DFB 도파로의 필터 특성들을 등가 전송선로 망을 사용하여 구현하였다. 대역 필터 특성과 공진 특성을 정확하게 분석하기 위하여 Floquet 이론과 Babinet 원리에 기초한 종방향 모드 전송선로 이론 (L-MTLT)을 제시하였다. 수치해석 결과, 본 논문에서 제시한 해석법은 주기가 다른 격자들로 구성된 DFB 도파로의 필터 특성들을 분석하기 위한 간단한 수치 해석적 알고리즘을 제공하였으며, DFB 필터의 대역폭과 사이드로브의 억압특성 각 영역에서의 격자개수와 격자 종횡비 (aspect ratio)에 민감하게 의존함을 보였다.

• 한국자동차공학회논문집
• /
• 제20권1호
• /
• pp.141-146
• /
• 2012

Aluminum alloys have been used with various thicknesses suitable for light weight of structure. It is known that the thickness effect of material is an important factor affecting fatigue crack propagation under constant fatigue stress condition. In this work, we presented the behavior of fatigue crack propagation in thin plate compared to thick plate Al 2024-T3 alloy with referred thickness effect in a correlative equation determined by the shape factor and the loading factor. We chose two factors that are used in the correlative equation with considering that the experiments were carried out under a constant fatigue stress condition. The thickness ratio of thin plate compared to thick plate and the equivalent effective stress intensity factor ratio depending on thickness were chosen as shape and loading factors. A correlative equation is utilized to determine the equivalent effective stress intensity factor range of thin plate and identify the degree of increasing phenomenon of fatigue life in thin plate compared to thick plate.