• 한국인터넷방송통신학회논문지
• /
• 제8권5호
• /
• pp.113-119
• /
• 2008

기존의 1-1-1 협력 프로토콜은 멀티 홉이 가지고 있는 경로손실감소 이득과 함께 MIMO와 동일한 공간 다이버시티를 제공한다. 이를 통해 싱글 홈, 멀티 홉보다 뛰어난 정보의 신뢰도 및 에너지 소비 감소를 얻을 수 있다. 하지만 기존의 1-1-1 협력 프로토콜은 단일의 협력 중계기를 사용하므로 경로손실감소 이득과 다이버시티 이득 계수가 2로 제한되어 있다. 따라서 본 논문에서는 두개의 협력 중계기 R1, R2를 사용한 1-2-1 협력 프로토콜을 제안한다. 1-2-1 협력 프로토콜은 경로손실감소 이득을 높이고 계수가 3인 다이버시티 이득을 얻는다. 또한, 협력 중계가 R2에서도 계수가 2인 다이버시티 이득을 얻을 수 있다. 협력 중계기는 DF (Decode and Forward)와 DR (Decode and Reencode) 방식을 사용하여 1-2-1 DF 또는 DR 협력 프로토콜을 형성하고, 클러스터링 기반의 무선 센서 네트워크 (WSNs)에 적용한다. 제안한 프로토콜의 성능평가를 위해 레일리 페이딩과 AWGN (Additive White Gaussian Noise) 채널이 합해진 채널에서 모의실험을 한다.

• 한국통신학회논문지
• /
• 제19권11호
• /
• pp.2276-2290
• /
• 1994

본 논문에서는 입력된 문자에서 비교적 안정적 구조특징을 추출하고 이 구조정보를 이용하여 문자를 좀 더 세부적인 유형으로 분류한 후 인식을 행하는 문자 인식 방법을 제안한다. 본 방법은 우선 한글 문자를 스캐너로 입력받아 방향코드화하고 방향코드화된 문자로부터 방향밀도벡터를 추출하여 기본 6형식으로 분류한다. 그리고 기본형식 정보에 의해 각 문자로부터 안정된 구조특징을 추출하고 안정된 구조특징을 이용해 26가지 형태의 세부유형으로 분류하여 각 해당 자소 영역의 방향밀도벡터를 신경망에 입력하여 인식하거나 직접 해당 자소의 인식을 행한다. 한글 KS C 5601의 2350자에 대해 실험한 결과 94%의 인식률을 얻어 본 방법의 유효성을 확인할 수 있었다.

• Structural Engineering and Mechanics
• /
• 제47권5호
• /
• pp.679-700
• /
• 2013

Two new predictive design methods are presented in this study. The first is a hybrid method, called neuro-fuzzy, based on neural networks with fuzzy learning. A total of 280 experimental datasets obtained from the literature concerning concentric punching shear tests of reinforced concrete slab-column connections without shear reinforcement were used to test the model (194 for experimentation and 86 for validation) and were endorsed by statistical validation criteria. The punching shear strength predicted by the neuro-fuzzy model was compared with those predicted by current models of punching shear, widely used in the design practice, such as ACI 318-08, SIA262 and CBA93. The neuro-fuzzy model showed high predictive accuracy of resistance to punching according to all of the relevant codes. A second, more user-friendly design method is presented based on a predictive linear regression model that supports all the geometric and material parameters involved in predicting punching shear. Despite its simplicity, this formulation showed accuracy equivalent to that of the neuro-fuzzy model.

• Journal of Communications and Networks
• /
• 제8권2호
• /
• pp.169-174
• /
• 2006

In this paper, the algorithm of a methodology for the calculation of spectrum requirements was implemented. As well, the influence of traffic distribution ratio among radio access technology groups, spectral efficiency, and flexible spectrum usage (FSU) margin was analyzed in terms of the spectrum requirements, with a view toward for future development of international mobile telecommunication (IMT)-2000 and systems beyond IMT-2000. The calculated spectrum requirement in the maximum spectral efficiency case is reduced by approximately 40% compared to a minimum spectral efficiency case. The effect of the distribution ratio on the required spectrum is smaller than the effect of the spectral efficiency. As the flexible spectrum usage margin increases by 1.0 dB, the total spectrum requirement decreases by 0.9 dB. The required spectrum for the market input parameter, ${\rho}$ = 0.5 is 801.63 MHz, while the required spectrum for ${\rho}$ = 1.0 is 6295.4 MHz. This is equivalent to an increase of 785.32 %.

• Journal of Communications and Networks
• /
• 제5권2호
• /
• pp.141-149
• /
• 2003

In this paper, we investigate design criteria and the performance of the space-frequency bit-interleaved coded modulation (SF-BICM) systems in frequency-selective Rayleigh fading channels. To determine the key parameters that affect the performance of SF-BICM, we derive the pairwise error probability (PEP) in terms of the determinant of the matrix corresponding to any two codewords. We prove that the bit-interleavers do the function of distributing the nonzero bits uniformly such that two or more nonzero bits are seldom distributed into the symbols that are transmitted in the same frequency bin. This implies that the bit-interleavers transform an SF-BICM system into an equivalent 1-antenna system. Based on this, we present design criteria of SFBICM systems that maximizes the diversity order and the coding gain. Then, we analyze the performance of SF-BICM for the case of 2-transmit antennas and 2-multipaths by deriving a frame error rate (FER) bound. The derived bound is accurate and requires only the distance spectrum of the constituent codes of SF-BICM. Numerical results reveal that the bound is tight enough to estimate the performance of SF-BICM very accurately.

• 한국인터넷방송통신학회논문지
• /
• 제8권4호
• /
• pp.35-42
• /
• 2008

DCF 성능 분석 모델에 사용되는 Bianchi의 2차원 Markov Chain 모델은 오류가 없는 이상적 채널에서 충돌 문제만을 다루므로 페이딩, 간섭, 잡음 등 실제 채널의 특성을 반영하지 못한다. 802.11 DCF는 전송실패가 충돌에 의한 것이든, 채널 전송오류에 의한 것이든 경쟁윈도우(CW) 크기를 두 배로 증가시키는 2진 지수후퇴 알고리즘을 작동시킨다. 이상적으로 경쟁윈도우 증가는 혼잡에 의한 충돌방지 때에만 사용되어져야 한다. 통신오류에 의한 경쟁윈도우 증가는 데이터 처리율을 떨어뜨리고 전송지연의 증가를 야기 시킨다. 오류 채널에서는 전송실패 증가가 과도한 이진 지수후퇴를 야기하므로 초기 경쟁윈도우(CW) 크기를 줄여줄 필요가 있다. 본 논문에서는 경쟁윈도우(CW), 타임슬롯에서 전송 확률(${\Im}$), 전송 실패 확률($p_f$) 등이 시스템 성능에 미치는 영향을 정량적, 정성적으로 분석을 하고 등가적으로 CW 값을 얼마큼 줄여야 할지를 제시한다.

• Advances in materials Research
• /
• 제1권4호
• /
• pp.245-268
• /
• 2012

Results of isothermal torsional oscillation tests are reported on melts of linear low density polyethylene and isotactic polypropylene. Prior to rheological tests, specimens were annealed at various temperatures ranging from $T_a$ = 180 to $310^{\circ}C$ for various amounts of time (from 30 to 120 min). Thermal treatment induced degradation of the melts and caused pronounced decreases in their molecular weights. With reference to the concept of transient networks, constitutive equations are developed for the viscoelastic response of polymer melts. A melt is treated as an equivalent network of strands bridged by junctions (entanglements and physical cross-links). The time-dependent response of the network is modelled as separation of active strands from and merging of dangling strands with temporary nodes. The stress-strain relations involve three adjustable parameters (the instantaneous shear modulus, the average activation energy for detachment of active strands, and the standard deviation of activation energies) that are determined by matching the dependencies of storage and loss moduli on frequency of oscillations. Good agreement is demonstrated between the experimental data and the results of numerical simulation. The study focuses on the effect of molecular weight of polymer melts on the material constants in the constitutive equations.

• 대한전자공학회논문지SD
• /
• 제43권4호
• /
• pp.31-37
• /
• 2006

광 신호 제어 시스템에서 사용되는 광/안테나 연결회로의 제작 간소화에 대한 중요성이 지속적으로 대두되고 있다. 이를 위하여, 본 논문에서는 광섬유로 제작된 새로운 형태의 photonic 안테나 설계에서 광 도전 효과에 기인한 광섬유와 슬롯 결합형 마이크로 스트립 안테나 사이의 광 결합효율을 수치 해석적으로 분석하였다. 결합특성을 정확하게 분석하기 위하여 원통형, 평면형 전송구조들이 결합할 때 발생하는 불연속 특성을 포함한 새로운 모드 전송선로 이론을 정의하였다 분석결과, 서로 다른 두 전송구조에서의 최대 전력전송은 그 결합영역에서 전파하는 정확한 두 모드들의 전송전력이 균등하게 분배되는 새로운 지점에서 발생함을 보였다.

• Journal of Power Electronics
• /
• 제16권2호
• /
• pp.643-653
• /
• 2016

The conventional methods used to evaluate battery state-of-charge (SOC) cannot accommodate the chemistry nonlinearities, measurement inaccuracies and parameter perturbations involved in estimation systems. In this paper, an impedance-based equivalent circuit model has been constructed with respect to a LiFePO₄ battery by approximating the electrochemical impedance spectrum (EIS) with RC circuits. The efficiencies of approximating the EIS with RC networks in different series-parallel forms are first discussed. Additionally, the typical hysteresis characteristic is modeled through an empirical approach. Subsequently, a methodology incorporating an H-infinity observer designated for open-circuit voltage (OCV) observation and a hysteresis model developed for OCV-SOC mapping is proposed. Thereafter, evaluation experiments under FUDS and UDDS test cycles are undertaken with varying temperatures and different current-sense bias. Experimental comparisons, in comparison with the EKF based method, indicate that the proposed SOC estimator is more effective and robust. Moreover, test results on a group of Li-ion batteries, from different manufacturers and of different chemistries, show that the proposed method has high generalization capability for all the three types of Li-ion batteries.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권9호
• /
• pp.2120-2133
• /
• 2013

In this paper, we address the problem of linear minimum mean-squared error (MMSE) transmitter design for the cognitive radio (CR) multi-user multiple-input single-output (MU-MISO) broadcasting channel (BC), where the cognitive users are subject to not only a sum power constraint, but also a interference power constraint. Evidently, this multi-constraint problem renders it difficult to solve. To overcome this difficulty, we firstly transform it into its equivalent formulation with a single constraint. Then by utilizing BC-MAC duality, the problem of BC transmitter design can be solved by focusing on a dual MAC problem, which is easier to deal with due to its convexity property. Finally we propose an efficient two-level iterative algorithm to search the optimal solution. Our simulation results are provided to corroborate the effectiveness of the proposed algorithm and show that this proposed CR MMSE-based scheme achieves a suboptimal sum-rate performance compared to the optimal DPC-based algorithm with less computational complexity.