• Journal of the Mineralogical Society of Korea
• /
• v.16 no.1
• /
• pp.49-63
• /
• 2003

Rare and unusual occurrence of hydrothermal minerals were found in Geode mine area. They are developed in the late stage of hydrothermal alteration of earlier skarns and later by the open-space filling crystallization. The alteration of earlier skarns of clinopyroxene, garnet, and plagioclase formed mainly chlorite or sometimes uncommon hydrothermal minerals of prehnite, illite, and pumpellyite. Open-space filling crystallization characterized by hydrothermal minerals developedin open sapce or good are prehnite, pumpellyite, clinozoisite, illite, and Ca-zeolites of stilbite annstellerite. Mineral phases and paragenesis are examined in detail by microscopy, XRD, SEM, and EPMA. Using the Schreinemaker's method, equibrium reactions among these minerals are establishedand isothemal-isobaric phase diagrams of $\mu$$H_2O$-$\mu$$CO_2$cot are plotted. Hydrothermal minerals such asprehnite, pumpellyite, clinozoisite, illite, and some chlorite were ffrmed under high partial pressure of $CO_2$with relatively low $H_2$O fugacity. Later, stilbite and calcite in association with illite crystallized under relatively both high partial Pressure of $CO_2$and high $H_2$O fugacity.

• Analytical Science and Technology
• /
• v.13 no.2
• /
• pp.208-214
• /
• 2000

The formation and dissolution of hydroxides, carbonates and hydroxyapatite (HAp), which depend on the pH of solution, are important factor for the preparation of homogeneous and fine HAp, $Ca_{10-x}(HPO_4)_x(PO_4)_{6-x}(OH)_{2-x}(x=0)$, ceramic powder from the $Ca-PO_4-H_2O$ system. Since the solubility of each complex ion is a linear function of pH, the solubility diagram can be obtained by plotting the logarithmic molar concentrations calculated from the values of the equilibrium constants and solubility products for hydroxides, carbonates, and hydroxyapatite. The optimum pH condition for the formation of single phase $Ca_{10-x}(HPO_4)_x(PO_4)_{6-x}(OH)_{2-x}(x=0)$ powder in $Ca-PO_4-H_2O$ system at $25^{\circ}C$ was estimated as $10.5{\pm}0.5$ through the theoretical consideration. The HAp powder dried at $80^{\circ}C$ showed a fine agglomerated particles with a size of 75 nm. The HAp powder calcined at $1,000^{\circ}C$ consisted of nearly homogeneous particles with a size of 450 nm. Even though the dried HAp particles consisted of agglomeration, mechanical properties were superior due to fine microstructure after sintering.

• Resources Recycling
• /
• v.30 no.6
• /
• pp.28-35
• /
• 2021

An experiment was conducted to separate or recover Co and Ni using Cyanex 301 from process by-products and waste resources containing Co and Ni. To separate and recover Co and Ni from simulated leaching solutions, 10 v/v% Cyanex 301 was used as an extractant in this study; Li was not extracted. At equilibrium pH 1.5 and a phase ratio (A/O) of 1.0, 0.44% of Mg and 11.57% of Mn were extracted, and more than 99% of Co and Ni were extracted. McCabe-Thiele diagram analysis confirmed that more than 99.9% of Co and Ni could be extracted simultaneously through two-stage extraction with an extraction phase ratio (A/O) of 2. It was possible to extract Mg and Mn simultaneously through the scrubbing process. In the scrubbing process, more than 99% of Mg and 87% of Mn were scrubbed using 0.05 M of H₂SO₄, and 99.9% of Mg and more than 80% of Mn were scrubbed using 0.05 M of HCl. In the stripping process, 93% of Co and 5% of Ni were stripped selectively by 3.0 M of H₂SO₄. However, when 8.0 M of HCl was used as a stripping solution, more than 99.9% of Co and more than 90% of Ni were stripped simultaneously.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.54 no.5
• /
• pp.217-225
• /
• 2005

In a power system, an out-of-step condition causes a variety of risk such as serious damage to system elements, tripping of loads and generators, mal-operation of relays, etc. Therefore, it is very important to detect the out-of-step condition and take a proper measure. Several out-of-step detection methods have been employed in relays until now. Most common method used for an out-of-step detection is based on the transition time through the blocking impedance area in R-X diagram. Also, the R-R dot out-of-step relay, the out-of-step prediction method and the adaptive out-of-step relay using the equal area criterion (EAC) and Global Positioning Satellite (GPS) technology have been developed. This paper presents the out-of-step detection algorithm using the time variation of the complex power. The complex power is calculated and the mechanical power of the generator is estimated by using the electrical power, and then the out-of-step detection algorithm which is based on the complex power and the estimated mechanical power, is presented. This algorithm may detect the instant when the generator angle passes the Unstable Equilibrium Point (UEP). The proposed out-of-step algorithm is verified and tested by using Alternative Transient Program/Electromagnetic Transient Program (ATP/EMTP) MODELS.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.313-315
• /
• 2005

In a power system, an out-of-step condition causes a variety of risk such as serious damage to system elements, tripping of loads and generators, mal-operation of relays, etc. Therefore, it is very important to detect the out-of-step condition and take a proper measure. Several out-of-step detection methods have been employed in relays until now Mo,;t common method used for an out-of-step detection is based on the transition time through the blocking impedance area in R-X diagram. Also, the R-R dot out-of- step relay, the out-of-step prediction method and the adaptive out-of-step relay using the equal area criterion (EAC) and Global Positioning Satellite (GPS) technology have been developed. This paper presents the out-of-step detection algorithm using the time variation of the complex power. The complex power is calculated and the mechanical power of the generator is estimated by using the electrical power, and then the out-of-step detection algorithm, which is based on the complex Power and the estimated mechanical power, is presented. This algorithm, may detect the instant when the generator angle passes the Unstable Equilibrium Point (UEP). The proposed out-of-step algorithm is verified and tested by using Alternative Transient Program/Electromagnetic Transient Program (ATP/EMTP) MODELS.

• Journal of the Korean Society of Groundwater Environment
• /
• v.5 no.4
• /
• pp.203-209
• /
• 1998

The quality of groundwater used for natural mineral water should be strictly regulated on international level by hydrogeology experts and officials because groundwater is greatly subjected to contaminations and its aquifer system may be easily destroyed by external reasons. A total of 18 natural mineral water plants exist in Precambrian metamorphic terrains of the Gyunggi massif and Yeungam massif. The g개undwater quality for the natural mineral water investigated in hydrochemical aspects shows that pH ranges from 6.85 to 8.02 with an average of 7.52. The electric conductivity (EC) and hardness average 134.1 $\mu$S/cm and 43.5, respectively, which are relatively low to the total average (151.4 $\mu$S/cm and 57.9). The contents of major cations and anions are in the order of $Ca^{2＋}$＞$Na^{＋}$＞Mg$^{2＋}$＞K$^{＋}$ and HCO$_3$$^{-}$ ＞SO$_4$$^{2－}$ ＞Cl$^{-}$ ＞F$^{-}$ , respectively. The dominant water types determined by Piper diagram are $Ca^{2＋}$－$Na^{＋}$－HCO$^{-}$ $_3$and $Ca^{2＋}$-HCO$^{-}$ $_3$, mainly due to the dissolution of plagioclase in the host rocks. Representative correlation coefficients between chemical species are $Ca^{2＋}$－HCO$^{-}$ $_3$(0.92), $Ca^{2＋}$－Cl$^{-}$ (0.63), $Na^{＋}$－F$^{-}$ (0.67), HCO$^{-}$ $_3$－Cl$^{-}$ (0.66), and $Na^{＋}$－HCO$^{-}$ $_3$(0.63). The determinative. coefficients between $Ca^{2＋}$ and HCO$^{-}$ $_3$, and (Ca$^{2＋}$＋$Na^{＋}$＋K$^{＋}$ and EC art highest among the elements. According to the saturation index, most chemical species are undersaturated with respect to major minerals, except for some silica phases. In viewpoint of phase equilibrium, the chemical evolution of the groundwater may continue to proceed with increasing pH because the groundwater is undersaturated with respect to feldspars.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.3
• /
• pp.55-62
• /
• 2000

This paper presents an analysis of the chaotic behavior in the discrete-time voltage mode chaotic generator fabricated using 0.8${\mu}{\textrm}{m}$ single poly CMOS technology. An approximated empirical equation is extracted from the measurement data of a nonlinear function block. Then the bifurcation diagram is simulated according to input variables and Lyapunov exponent λ which represent a dependence on an initial value is calculated. We show the interrelations among time waveforms, state transition, and power spectra for the state condition of chaotic circuit, such as equilibrium, periodic, and chaotic state. And results of experiments in the chaotic circuit with the $\pm$2.5V power supply and sampling clock frequency of 10KHz are shown and compared with the simulated results.

• Resources Recycling
• /
• v.29 no.4
• /
• pp.51-57
• /
• 2020

Separation of Co and Ni over Mg from the sulfuric acid solutions using Cyanex272, PC88A and Versatic acid 10 as an extractant was carried out. From the comparative studies about the extraction behavior of Co, Ni and Mg, Versatic acid 10 was superior to Cyanex272 and PC88A for the selective extraction of cobalt and nickel from the mixed solutions. About 98% of Ni and Co were extracted at equilibrium pH 7.0 and less than 5% of Mg was co-extracted by Versatic acid 10. McCabe-Thiele diagram indicated two stages requirement for Co and Ni extraction by 10% Versatic acid 10 at pH 7.0 and phase ratio (A/O) of 2.0. The loaded Co and Ni in organic phase was stripped effectively the sulfuric acid concentration above 70 g/L. 99.78% of cobalt and 98.42% of nickel were stripped.

• Journal of the Korean Geophysical Society
• /
• v.7 no.2
• /
• pp.113-120
• /
• 2004

Hydrochemical characteristics of deep groundwater at Surak-ri, Nonsan-gun, Chungnam Province was explained by major ion concentration, water type, and phase stability diagram. The area is composed of meta-sedimentary rock and quartz pophyry. The 5 boreholes where deep groundwater was sampled and analyzed are located on the meta-sedimentary rocks and drilling depth range of the wells is from 554 m to 928 m. pH, TDS, Na, and SiO2 values are high in the groundwater from meta-sedimentary area intruded by quartz pophyry, while Ca is high in the groundwater from meta-sedimentary area. K and Mg concentrations are low but F concentration is high both groundwater. The content of major anions is in the order of CO3(HCO3)>Cl>SO4(F) in both geology, while that of major cations shows the order of Na>Ca>K(Mg) in meta-sedimentary area intruded by quartz porphyry and a>Na>Mg>Na in meta-sedimentary area. Based on the phase equilibrium in the systems Na2O-Al2O3-SiO2-H2O and K2O-Al2O3-SiO2-H2O, the groundwater is saturated with respect to Quartz and more evolved compared with the natural mineral water. It is concluded that chemical evolution in the groundwater from meta-sedimentary area intruded by quartz porphyry, is nearly saturated with respect to feldspar, while the groundwater from meta-sedimentary area continue to proceed with increasing pH by reaction of feldspar.

• Journal of the Korean Institute of Gas
• /
• v.27 no.3
• /
• pp.35-40
• /
• 2023

In order to prevent an ammonia container from bursting under conditions such as overcharging and abnormal temperature rise, it is necessary to prepare accident prevention measures through analysis of the operating mechanism of the Thermally Activated Pressure Relief Devices (TPRD) attached to the container. In this study, stress analysis acting on the ammonia container under pressurized conditions, density change analysis according to temperature change, and correlation between container filling amount and temperature and pressure change were presented. In addition, the maximum filling amount of the ammonia container was calculated, and the temperature and pressure at the filling amount were calculated through the phase equilibrium diagram. Based on this, the appropriate melting point of the Thermally Activated Pressure Relief Devices was derived and verified through a melting temperature experiment. Based on the results of this study, conditions for preventing ammonia container rupture accidents were suggested.