• 한국환경보건학회지
• /
• 제23권1호
• /
• pp.14-17
• /
• 1997

A total of 93 specimens of Astroconger myriaster were purchased from the Chungmu fishery market at the south sea area during the period from October 1 to November 25, 1996. Specimens were examined for the infection status with larvae anisakid. Anisakid larvae were collected from viscera, muscle, omenturn and liver. Eight hundred four larval anisakids sorted from 93 specimens of A. myriaster ranged from 9.0 to 26.5mm in their body length. They were classified based on morphological and morphometric observations as follows Anisakis type 1 larvae (465 larvae, 57.8%: positive rate), Contracaecum type D(129, 16.0%), Contracaecum type A(90, 11.2%), Anisakis type 11(60, 7.5%), Phapidascaris(3, 0.4%) and unknown type(57, 7.1%).

• Mycobiology
• /
• 제43권3호
• /
• pp.239-257
• /
• 2015

We conducted five times surveys, in June, September and October in 2012; June and September 2013, to catalog the mushroom flora in Ulleung-gun, Republic of Korea. More than 400 specimens were collected, and 317 of the specimens were successfully sequenced using the ribosomal DNA internal transcribed spacer barcode marker. We also surveyed the morphological characteristics of the sequenced specimens. The specimens were classified into 2 phyla, 7 classes, 21 orders, 59 families, 122 genera, and 221 species, and were deposited in the herbarium of Korea National Arboretum. Among the collected species, 72% were saprophytic, 25% were symbiotic, and 3% were parasitic. The most common order was Agaricales (189 specimens, 132 species), followed by Polyporales (47 specimens, 27 species), Russulales (31 specimens, 22 species), Boletales (10 specimens, 7 species), and so on. Herein, we also reported the first Bovista species in Korea, which was collected from Dokdo, the far-eastern island of Korea.

• Geomechanics and Engineering
• /
• 제12권5호
• /
• pp.803-813
• /
• 2017

This study discussed the possible optimization of enzyme-mediated calcite precipitation (EMCP) as a soil-improvement technique. Magnesium chloride was added to the injection solution to delay the reaction rate and to improve the homogenous distribution of precipitated minerals within soil sample. Soil specimens were prepared in 1-m PVC cylinders and treated with the obtained solutions composed of urease, urea, calcium, and magnesium chloride, and the mineral distribution within the sand specimens was examined. The effects of the precipitated minerals on the mechanical and hydraulic properties were evaluated by unconfined compressive strength (UCS) and permeability tests, respectively. The addition of magnesium was found to be effective in delaying the reaction rate by more than one hour. The uniform distribution of the precipitated minerals within a 1-m sand column was obtained when 0.1 mol/L and 0.4 mol/L of magnesium and calcium, respectively, were injected. The strength increased gradually as the mineral content was further increased. The permeability test results showed that the hydraulic conductivity was approximately constant in the presence of a 6% mineral mass. Thus, it was revealed that it is possible to control the strength of treated sand by adjusting the amount of precipitated minerals.

• 한국건설순환자원학회논문집
• /
• 제6권4호
• /
• pp.283-288
• /
• 2018

균열 자기치유 소재는 균열발생 시점부터 노출환경 조건에 따라 활성화되기 때문에 치유성능과 균열면의 노출환경 조건과의 관계 규명이 매우 중요하다. 이에 본 연구에서는 자기치유형 보수 모르타르의 치유성능에 노출환경 조건이 미치는 영향을 투수시험을 통하여 조사하였다. 균열시험체의 초기 균열폭에 대한 온도 및 습도의 영향을 조사한 결과, 양생온도의 영향은 미미하였으나, 건습변화에 의해서는 균열닫힘 현상이 발생하고 있음을 확인하였다. 그리고 자기치유형 보수 모르타르 시험체의 균열부위에서 생성된 치유물질은 calcite 광물로 확인되었다. 밀도가 높은 calcite 광물은 중력의 영향을 받아 침강하기 때문에, 균열면의 방향에 따라 치유성능에 다소 차이를 나타냈으며, 또한 대기노출 조건보다 습윤노출 조건에서 치유성능이 크게 향상되었다.

• Computers and Concrete
• /
• 제32권5호
• /
• pp.487-498
• /
• 2023

The present study investigated the flexural behavior of reinforced concrete (RC) beams strengthened with an ultrahigh performance concrete (UHPC) panel having various thicknesses. Two fabrication methods were introduced in this study; one was the direct casting of UHPC onto the bottom surface of the RC beams (I-series), and the other was the attachment of a prefabricated UHPC panel using an adhesive (E-series). UHPC panels having thicknesses of 10, 30, 50, and 70 mm were applied to RC beams, and these specimens were subjected to four-point loading to assess the effect of the UHPC thickness on the flexural strengthening of RC beams. The test results indicated that the peak strength and initial stiffness were vastly enhanced with an increase in the thickness of the UHPC panel, showing an improved energy dissipation capacity. In particular, the peak strength of the E-series specimens was higher than that of I-series specimens, showing high compatibility between the RC beam and the UHPC panel. The experimental test results were comparatively explored with a discussion of numerical analysis. Numerical analysis results showed that the predictions are in fair agreement with experimental results.

• 자원리싸이클링
• /
• 제16권2호
• /
• pp.17-22
• /
• 2007

The report of an investigation into the performance of mortar specimens made with recycled fine aggregate (RA) exposed to sodium sulfate solution for 360 days is presented in this paper. Mechanical properties of mortar specimens such as visual examination, compressive strength, expansion and mass loss were periodically monitored. From the test results, it was found that mortar specimens with higher replacement levels of Rh exhibited poor performance in sodium sulfate solution. However, compared to mortar specimens without RA, those with lower replacement levels of RA (up to 50% by mass) was more resistant to sulfate attack. Through the x-ray diffraction analysis, it was confirmed that the main products causing sulfate deterioration in RA mortar specimens were the formation of gypsum and thaumasite.

• 자원환경지질
• /
• 제45권2호
• /
• pp.169-180
• /
• 2012

환경시료은행은 환경질(environmental quality)의 시공간적 변화를 모니터링 하는 역할 뿐 아니라 시료 자체를 장기 보존함으로써 후세에 과거의 환경을 직접적으로 검증할 수 있는 기회를 부여하는 기능을 가지고 있다. 이를 위해서 다양한 생태계의 환경을 대표할 수 있는 선정된 시료를 엄격하게 규정된 채취방법에 따라 채취하여 성분변화가 일어나지 않는 초저온상태에서 장기간 보관함으로써 미래 시점에서 회고적 분석(retrospective analysis)을 수행할 수 있는 시설이 요구된다. 선진국에서는 이미 30여 년 전부터 환경정책의 실효성을 입증하거나 시대별 환경배경농도의 변화를 모니터링 하기 위해 다양한 환경시료를 저장해 오고 있다. 우리나라에서 2009년 자동화된 초저온 저장시설을 갖춘 국가환경시료은행이 국립환경과학원의 연구진에 의해 설립되었다. 이를 계기로 선진국의 시료은행 운영 경험을 발전시켜 단시간 내에 정상궤도에 안착시키려는 노력을 경주하고 있다. 아울러 그간 선진국의 운영 사례를 분석하고 이를 토대로 작성된 표준운영절차(SOP)에 따라 시험연구를 진행하고 있다. 이러한 과정에서 도출된 문제점을 분석하고 개선함으로 환경을 대표하는 시료의 저장 및 분석이라는 기본적인 기능에 충실한 수행체계를 갖추어 나가고 있다. 그러나 이와 동시에 환경시료은행의 기능을 적극 응용하여 독자적 부가기능을 부여하는 청사진이 제시되고 이에 대한 실행방안도 요구되는 상황이다. 이를 계기로 국가환경시료은행이 명실공히 국제적인 환경기구로 인정받는 도약의 발판을 마련해야 할 것이다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.411-413
• /
• 2012

본 연구에서는 핀 하중 시험을 통해 열습환경이 탄소섬유/에폭시 복합재료에 미치는 영향을 조사하고 음향방출법을 적용하여 핀 체결부의 파손거동을 분석하였다. 열습환경이 적용된 핀 체결부 시편은 base (침수전), RT (상온침수), HT ($75^{\circ}C$침수)의 세 가지의 조건으로 구분하였다. 결과에 의하면 RT의 경우 base에 비해 베어링강도의 저하정도가 적지만 수분과 온도가 동시에 적용된 열습환경에 노출된 HT의 경우 베어링강도의 저하정도가 크게 나타났다. 또한 음향방출법을 적용하여 누적히트수를 분석한 결과에 따르면 열습을 고려한 경우가 base에 비해 모재균열에 의한 이벤트가 감소하는 경향이 나타났다.

• Corrosion Science and Technology
• /
• 제7권2호
• /
• pp.125-129
• /
• 2008

Results of corrosion testing for different grades of titanium, copper, zinc, alluminium alloys and steels after two years of outdoor exposure under humid tropical urban and marine conditions have been presented and discussed. Mass loss and corrosion product characteristics for the exposed specimens at Hanoi testing site with high humidity and Nhatrang marine stations (at 100 and 1,000 meters distances from sea) with different airborne salinities (35.9 and $90.0mg/m^2.d$ respectively) have been selected for investigation. From time dependence of the specimen mass loss and corrosion product characteristics, the strong influence of environmental parameters upon durability for the investigated metals and alloys has been demonstrated. Only titanium alloys show high resistance to the marine conditions. All the other specimens (copper, zinc, alluminium alloys and steels) have been underwent strong deterioration under influence of aerosol salinity. Results of corrosion products analysis have been also presented for characterization of environmental impact on the metal degradation processes.

• 한국어류학회지
• /
• 제17권2호
• /
• pp.148-151
• /
• 2005

우리 나라 남부연안에서 채집된 3개체 (체장 36.6~54.2 mm)의 표본에 근거하여 청황베도라치의 외부형태를 재기재하였다. 본 종은 제2등지느러미 극조가 26~28개, 뒷지느러미 연조가 22~26개, 전방 측선린수가 27~30개인 점, 그리고 미부의 흑색띠가 특징적이다.