• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.90-96
• /
• 2008

Engineered mixtures composed of rigid sand particles and soft rubber particles are tested to investigate their behavior with strain level. Mixtures are prepared with different volumetric sand fractions (sf) to identify response using small strain resonant column, intermediate strain oedometer, and large strain direct shear tests. The small strain shear modulus and damping ratio are determined with volumetric sand fractions. The asymmetric frequency response curve increases with decreasing sand fraction. Linear responses of shear strain and damping ratio with shear strain are observed at the mixture of sf=0.2. Vertical strain increases with decreasing sand fraction. Mixtures with $04.{\leq}sf{\leq}0.6$ show the transitional stress-deformation behavior from rubber-like to sand-like behavior. The friction angle increases with the sand fraction and no apparent peak strength is observed in mixture without sf=1.0.

• Wind and Structures
• /
• v.20 no.5
• /
• pp.683-699
• /
• 2015

Lighting poles and antenna masts are typically high, slender and light structures. Moreover, they are often characterized by distributed eccentricities that make very complex their shape. Experience teaches that this structural type frequently suffers severe damage and even collapses due to wind actions. To understand and interpret the aerodynamic and aeroelastic behavior of lighting poles and antenna masts, this paper presents the results of static and aeroelastic wind tunnel tests carried out on a complex prismatic element representing a segment of the shaft of such structures. Static tests are aimed at determining the aerodynamic coefficients and the Strouhal number of the test element cross-section; the former are used to evaluate the critical conditions for galloping occurrence based on quasi-steady theory; the latter provides the critical conditions for vortex-induced vibrations. Aeroelastic tests are aimed at reproducing the real behavior of the test element and at verifying the validity and reliability of quasi-steady theory. The galloping hysteresis phenomenon is identified through aeroelastic experiments conducted on increasing and decreasing the mean wind velocity.

• Geomechanics and Engineering
• /
• v.21 no.2
• /
• pp.133-142
• /
• 2020

Submerged floating tunnel (SFT) is a type of tunnel which causes the tunnel segments to float in the water. When the SFTs are connected to the ground, the connection between the SFT and the subsea bored tunnel is fragile due to the difference in behavioral characteristics between the two types of tunnels. Therefore, special design and construction methods are needed to ensure the stability of the area around the connection. However, since previous research on the stability of the connection site has not been undertaken enough, the basic step necessitates the evaluation of ground behavior at the shore connection. In this study, the numerical analysis targeting the shore connection between the subsea bored tunnel and the SFT was simulated. The strain concentration at the shore connection was analyzed by numerical simulation and the effects of several factors were examined. The results showed the instability in the ground close to the shore connection due to the imbalance in the behavior of the two types of tunnels; the location of the strain concentration varies with different environmental and structural conditions. It is expected that the results from this study can be utilized in future studies to determine weak points in the shore connection between the submerged floating tunnel and the subsea bored tunnel, and devise methods to mitigate the risks.

• Korean Institute of Interior Design Journal
• /
• no.9
• /
• pp.108-115
• /
• 1996

The relationship between users and physical elements of environmental gives a space special characteristics. The Environment Probabilitism by Altman shows that behavior and environment, both response, effect each other construct their characteristics. People can choose their response consciously or unconsciously during their walking , sitting, standing, talking in their environment. Designing a good place can lead people to the goal that they want and designer intend to get, A good place well designed as an positive place is organised with 3 points(1) User's behavior (2) physical elements in environment (3) meanings produced between behavior and physical elements. In this study the importance of physical elements are focused on. In the place where we can have permeability, variety , legibility, robutness, visual appropriateness, richness, personalisation physically , these characteristics will encourage people to have strong motivation and to choose the most active way . From this perspective the circulation of physically handicapped persons is analyzed into their behavioral environment and their behavioral response. The analysis shows the handicapped in our situation has no environmental right for a man itself ,even they have no street to walk safely. And their response to the environment was very negative. Basically the elements from exterior space to interior space should be guaranteed for everyday according to their behavioral characteristics include handicapped. From this study the result shows that the needs of a person should be considered and accepted as an important design problem for improvement our environment.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.10
• /
• pp.197-205
• /
• 2021

This study aims to investigate factors influencing customer behavior towards nylon bags and single-use plastics. These factors are environmental protection awareness, health protection awareness, sense of responsibility, expectations, and green marketing. A quantitative method with the use of surveys is deployed to collect data of young people under 30, generating 1650 valid responses. The collected data is then analyzed with SPSS 22, using Cronbach's Alpha and Exploratory Factor Analysis to test the reliability of the model before validating the hypotheses by regression analysis. The study found that the majority of respondents are inclined to use plastic bags, despite their environmental awareness. The results also demonstrate that health consciousness, environmental concerns, self-driven responsibility for the sustainability of young people have a significant impact on their behaviors in using nylon bags and plastic products, whereas expectation and green marketing are confirmed not to be the factors. The study suggests that if green marketing is to gain higher influence, an increase in research and development to support other environmentally friendly packaging would be the right path. Finally, this research proposes some feasible recommendations for the government, which include imposing bolder and more targeted environmental policies on consumers and introducing educational campaigns to raise awareness about minimizing plastic consumption.

• The Research Journal of the Costume Culture
• /
• v.27 no.2
• /
• pp.181-192
• /
• 2019

The growth of cheap, industrial, mass-production-so-called "fast fashion"-has led to dramatic increases in levels of consumption. Inexpensive products tend to foster unsustainable consumption behaviors, which negatively impact the environment and increase pressure to obtain goods at lower and lower prices; this, in turn, has the competitive effect of decreasing wages. This study focused on the concept of socially responsible consciousness in relation to fashion products. Environmental and labor issue concerns were employed as major variables. Empirical data were collected from males and females, between the ages of 10 and 50. Demographic differences were found in SR consciousness. For example, participants in their 10s, 40s, and 50s had higher levels of SR consciousness than those in their 20s and 30s. In addition, consumers' levels of environmental and labor issue concerns had varying effects on the criteria they used to select clothing. Product category type was also an influential factor. Moreover, the analysis showed that SR consciousness was less important in the apparel industry than in the food sector. The study also found an attitude-behavior link in relation to the concept of SR consciousness. The link was stronger for environmental concerns than for labor issue concerns. This study aimed to develop a better understanding of current customers' characteristics and levels of SR consciousness.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.321-327
• /
• 2022

This study explored the environmental health behavior intervention study for pregnant women using a scoping review. The evidence synthesis of intervention methods, research topics, outcome variables, and effectiveness was performed. Eight studies were extracted from the databases of PubMed, Cochrane Library, and RISS. The topics were nutritional interventions and behavioral interventions that can reduce exposure to fine dust, heavy metals, chemicals, and electromagnetic waves to pregnant women. The interventions were conducted through lectures, cartoons, workshops, interviews, messages, and home visits. The effect of the intervention was found to improve the health behaviors of pregnant women and to solve problems in the residential environment. Therefore, the environmental health behavior interventions for pregnant women were effective.

• Nuclear Engineering and Technology
• /
• v.56 no.9
• /
• pp.3512-3527
• /
• 2024

Seismic quantification of nonstructural components like electrical cabinets is essential to ensure the uninterrupted operation of nuclear facilities during earthquake events. This process requires experimental tests, which can be expensive, time-consuming, and limited by safety concerns and precision. As an alternative to that, numerical simulations should be done in such a way that they are capable of capturing the global dynamic behavior with minimum computational efforts. However, in the case of complex interconnected cabinets, the simplification of numerical models often poses difficulties in illustrating the real-time behavior of combined cabinet systems. On the other hand, detailed three-dimensional (3D) numerical models require lengthy time and sophisticated computational setup, indicating their expensive computational efforts. To resolve this issue, a simplified and efficient 3D modeling approach has been proposed in this study. The accuracy of the results from the new model showed an excellent match with that obtained from the responses of the experimental test. After the validation and observation of the numerical efficiency, a practical application is implemented by considering the impacts of earthquake frequency contents on the behavior of cabinet systems. From the outcomes, it is evident that this proposed modeling methodology has the potential to replace the complex combined nuclear cabinet models for earthquake evaluation.

• Structural Engineering and Mechanics
• /
• v.61 no.1
• /
• pp.125-142
• /
• 2017

Extensive research work has been performed on shear strengthening of reinforced concrete (RC) beams retrofitted with externally bonded carbon fiber reinforced polymer (CFRP) in form of strips. However, most of this research work is experimental and very scarce studies are available on numerical modelling of such beams due to truly challenging nature of modelling concrete shear cracking and interfacial interaction between components of such beams. This paper presents an appropriate model for RC beam and to simulate its cracking without numerical computational difficulties, convergence and solution degradation problems. Modelling of steel and CFRP and their interfacial interaction with concrete are discussed. Finally, commercially available non-linear finite element software ABAQUS is used to validate the developed finite element model with key tests performed on full scale T-beams with and without CFRP retrofitting, taken from previous extensive research work. The modelling parameters for bonding behavior of CFRP with special anchors are also proposed. The results presented in this research work illustrate that appropriate modelling of bond behavior of all the three types of interfaces is important in order to correctly simulate the shear behavior of RC beams strengthened with CFRP.

• Journal of Environmental Science International
• /
• v.27 no.12
• /
• pp.1195-1203
• /
• 2018

Many consumers intend to make environmentally purchase. However, this is not always what occurs. A gap exists between consumer intentions to purchase environmentally friendly products and their actual purchase behavior. In this study, we examined the effect of situational factors such as price sensitivity, product quality perception, and label trust on the relationship between purchase intention and purchase behavior for environmentally friendly products. First, we conducted a theoretical consideration through a review of literature on price sensitivity, product quality perception, label trust, purchase intention and purchase behavior. Based on the literature review, we designed a structural model and developed the hypotheses. Next, we collected data using a survey and processed them statistically in order to verify the hypotheses. A total of 213 samples were collected and the data were analyzed using a structural equation model (LISREL 8.70). The results suggest that the situational factor of label trust has a moderating effect on the relationship between purchase intention and purchase behavior for environmentally friendly products. However, price sensitivity and product quality perception have no moderating effect. This means that trust in labels is important when consumers want to buy environmentally friendly products. Although this study has some limitations, it is expected that it will positively trigger follow-up research.