• 한국환경과학회지
• /
• 제24권7호
• /
• pp.907-915
• /
• 2015

The tap water is generally known to be corrosive in the pH range at 6.5 ~ 7.5. And the degree of corrosion varies depending on the types of raw water such as river surface water or lake water of the dam. Although several corrosion index represents the corrosivity of tap water, the typical corrosion indexes such as Langelier saturation index (LI) and calcium carbonate precipitation potential (CCPP) were calculated to monitoring the corrosive water quality about raw and tap water in water distribution system. To control the corrosive water quality, the correlation between corrosion index and water quality factors were examined. In this study, corrosion index (LI, CCPP) and the pH was found to be most highly correlated.

• 환경영향평가
• /
• 제22권6호
• /
• pp.713-724
• /
• 2013

In terms of waste load allocation, inequality of waste load discharge must be considered as well as economic aspects such as minimization of waste load abatement. The inequality of waste load discharge between areas was calculated with Gini coefficient and was included as one of the objective functions of the multi-objective waste load allocation. In the past, multi-objective functions were usually weighted and then transformed into a single objective optimization problem. Recently, however, due to the difficulties of applying weighting factors, multi-objective genetic algorithms (GA) that require only one execution for optimization is being developed. This study analyzes multi-objective waste load allocation using NSGA-II-aJG that applies Pareto-dominance theory and it's adaptation of jumping gene. A sensitivity analysis was conducted for the parameters that have significant influence on the solution of multi-objective GA such as population size, crossover probability, mutation probability, length of chromosome, jumping gene probability. Among the five aforementioned parameters, mutation probability turned out to be the most sensitive parameter towards the objective function of minimization of waste load abatement. Spacing and maximum spread are indexes that show the distribution and range of optimum solution, and these two values were the optimum or near optimal values for the selected parameter values to minimize waste load abatement.

• 한국환경과학회지
• /
• 제4권5호
• /
• pp.157-157
• /
• 1995

In order to analyze the sex-linked lethal mutagenic effects of ethyl methanesulfonate (EMS) in Drosophila melanogaster, the mutagenicities from the attached-X and Basc method have been detected. The indexes of relative lethal mutations at 2.0 and 4.0mM EMS treated group using the attached-X method were about 1.5 and 2.4 times than that of 1.0mM treated group, respectively. EMS had more pronounced effect in the sperm and spermatid stages in the induction of X-linked lethal mutations during the spermatogenesis. And, in the induction of X-linked recessive lethal mutations from the Basc method, the mutation frequency of 4.0mM EMS treated group as compared with 2.0mM was more than three fold. Two assay systems used in this study can support mutually according to experimental purposes, and the area of its application can be considerably wide.

• 한국환경과학회지
• /
• 제4권5호
• /
• pp.543-549
• /
• 1995

In order to analyze the sex-linked lethal mutagenic effects of ethyl methanesulfonate (EMS) in Drosophila melanogaster, the mutagenicities from the attached-X and Basc method have been detected. The indexes of relative lethal mutations at 2.0 and 4.0mM EMS treated group using the attached-X method were about 1.5 and 2.4 times than that of 1.0mM treated group, respectively. EMS had more pronounced effect in the sperm and spermatid stages in the induction of X-linked lethal mutations during the spermatogenesis. And, in the induction of X-linked recessive lethal mutations from the Basc method, the mutation frequency of 4.0mM EMS treated group as compared with 2.0mM was more than three fold. Two assay systems used in this study can support mutually according to experimental purposes, and the area of its application can be considerably wide.

• 한국물환경학회지
• /
• 제34권5호
• /
• pp.487-493
• /
• 2018

Urban stormwater runoff is the one of the most extensive causes of deterioration of water quality in streams in urban areas. Especially, in the Suyeong River watershed, non-point sources from urban-residential areas are the most common cause of water pollution. Also, it has been ascertained that BOD and COD as indexes of organic matter, have limitation on management of Suyeong River's water quality. In this study, changes of organic matter properties of Suyeong River from inflow of non-point source during rainfall were investigated. Fractions of organic matters were analyzed using water samples collected at two sites (Suyeong River and Oncheon Stream) during a rain event. Variations of dissolved organic carbon (DOC) concentration by rainfall were similar to flow rate change in the river. Distribution of organic matter fraction according to change of rain duration revealed that while hydrophilic component increased at initial rainfall, the hydrophobic component was similar to change in dissolved organic carbon (DOC) concentration. Also, the relative proportion of hydrophilic components in organic matter in river water increased, due to rainfall. Results of biodegradation of organic matters revealed that decomposition rate of organic matters during rainfall was higher than that of during a non-rainfall event.

• 대한환경공학회지
• /
• 제36권10호
• /
• pp.667-671
• /
• 2014

연구는 발효-소멸 기술을 통해 생산한 음식물 퇴비의 독성여부를 분석하고자 하는 것으로 무와 얼갈이 배추 종자를 대상으로 발아지수 분석을 통해 퇴비 독성을 분석하였다. 실험결과, 음식물 퇴비의 발아지수는 무, 배추 종자 모두 최소 104, 최대 170으로서 비료 공정규격에서 정한 기준이 70을 크게 상회하는 것으로 나타나 발효-소멸기술에 의한 음식물 퇴비가 퇴비로 사용하기에 적절한 수준으로 부숙이 이루어진 것으로 분석되었다.

• 한국미생물·생명공학회지
• /
• 제49권3호
• /
• pp.356-366
• /
• 2021

Two marine actinobacterial isolates, RG3 and RG8, were identified using 16Sr DNA as Streptomyces althioticus RG3 and Streptomyces californicus RG8 and submitted to the database of genetic information with accession numbers MW661230 and MW661234, respectively; they were found to have emulsification indexes of 60 ± 2.5% and 53 ± 2.2%, respectively. The biosurfactants obtained were stable at a temperature of 35℃ for both strains; they were stable at 10% NaCl, in the case of S. althioticus RG3 and at 10-15% NaCl in the case of Str.californicus RG8; both strains produced the most biosurfactant when exposed to alkaline conditions. We characterized the biosurfactants, including features such as their chemical composition, using Fourier transform infrared spectroscopy analysis. The antimicrobial activity of the biosurfactant extracts was evaluated using the well diffusion method against Vibrio alginolyticus MK170250, Escherichia coli ATCC 8739, Pseudomonas aeruginosa ATCC 4027, and Staphylococcus aureus ATCC 25923. S. althioticus RG3 biosurfactants were found to have better antimicrobial activity than those of Str. californicus RG8, indicating that they may be used in pharmaceutical industries and in the manufacture of antifouling products.

• Journal of the Korean Wood Science and Technology
• /
• 제47권3호
• /
• pp.311-323
• /
• 2019

The number of newly constructed traditional Korean houses, i.e., Hanoks, and light-frame buildings is increasing. However, related research is limited owing to the lack of awareness regarding safety evaluations. Therefore, this study conducted an outdoor exposure test to accurately evaluate wooden constructions. Spruce, pine, and fir (SPF) material was monitored for a year, wherein the SPF material was artificially dried under 18% moisture content, and its physical properties and color differences were measured once a month. Large differences were observed in the material's weight and moisture content, which are indexes sensitive to daily range and rainfall; however, no significant difference was found for other basic properties in the pre and post test results. Herein, $L^*$, $a^*$, and $b^*$ values represent color differences; these values exhibited a general decrease after the test. Such differences were attributed to the loss of lignin in the wood. The color difference value was high between the months of May and July, when the daily range and rainfall significantly fluctuated. Multiple regression analysis was performed on the $a^*$ value (redness indicator), daily range, rainfall, and ultraviolet index. The results indicated that the daily range influenced redness the most. According to the estimated regression equation, the daily range and redness are positively correlated. Based on the results, the types and influence of independent variables on color difference are expected to change as the wood's duration of outdoor exposure and the amount of data obtained both increase.

• Advances in nano research
• /
• 제15권2호
• /
• pp.113-128
• /
• 2023

The advancement of theoretical research has numerous challenges, particularly with regard to the modeling of structures, in contrast to experimental investigation of the mechanical behavior of complex systems. The main objective of this investigation is to provide an analytical analysis of the static problem of a new generation of composite structure, namely, functionally graded FG graphene reinforced composite GRC coated plates/shells. A complex power law function is used to define the material's graduation. Investigations are conducted on Hardcore and Softcore coated FG plates/shells. The virtual work approach is used to perform the equilibrium equations, which are then solved using the Galerkin technique to account for various boundary conditions. With reliable published articles, the presented solution is validated. The effects of hardcore and softcore distributions, gradation indexes, and boundary conditions on the buckling, bending deflection and stresses of FG GRC-coated shells are presented in detail. Obtained results and the developed procedure are supportive for design and manufacturing of FG-GRC coated plates/shells in several fields and industries e.g., aerospace, automotive, marine, and biomedical implants.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표회 논문집(I)
• /
• pp.161-166
• /
• 1998

The concrete structures designed and constructed by conventional design concept based on structural performance consideration show sometimes serious durability problem when the structures are exposed to aggressive environment. Because present design system focuses on the structure safety and considers durability indirectly by the concrete mix design and cover depth, the durability of concrete structure cannot be ensured. As the first step to develope the durability design for concrete structure, durability index which represents internal concrete resistance and environment index which represents external environmental exposure are derived quantitatively. In the next step, the durability design system is developed by checking durability limit state with computed two indexes under service life condition by considering of the reliability of structure. Finally, the proposed system is verified with a model problem.