• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.11
• /
• pp.1127-1131
• /
• 2011

We report on a pumpless cell culture chip in which a constant medium perfusion rate is maintained by balanced droplet dispensing. Previous chips had a decreasing perfusion rate due to the decreasing hydraulic-head difference ${\Delta}h$ between the inlet and drain. However, the present chip maintains a constant medium perfusion rate due to the constant ${\Delta}h$ between the inlet and drain maintained by balanced droplet dispensing. The perfusion rate Q was measured to be 0.1-$0.3{\mu}l$/min with a maximum deviation and error of 9.96% and 6.92%, respectively. In the perfusion culture (Q = 0.1-$0.3{\mu}l$/min), the maximum growth-rate of H358 cells was measured to be $57.8%{\pm}21.1%$ per day, which is 1.9 times higher than that of a static culture. The perfusion culture also resulted in higher cell viability than a static culture. The present chip offers a favorable environment with a high growth-rate and viability and thus has potential for use in the integrated cell culture system.

• Journal of Agricultural Extension & Community Development
• /
• v.3 no.1
• /
• pp.141-155
• /
• 1996

The purpose of this study was to investigate the sole of local newspaper for community development in Korea. Specific objectives of the study were : 1) to identify the role of local newspaper in community development, 2) to analyze problems and situations on local newspapers in Korea, and 3) to suggest desirable roles of local newspaper for the community development. To attain the above objectives, this study was carried out through literature review, contest analysis of selected local newspapers, and the questionnaire survey of selected readers of local newspaper. The data were collected from 267 readers of local newspaper who participated in the farmers` training session in the Rural Development Administration, by using questionnaires developed by the researcher, and total of 263 questionnaires were analyzed. The statistical techniques used for the study were frequence, percentile, standard deviation utilizing the $SPSS/PC^+$. The major findings of the study were as follows : 1. The major roles of functions of local newspapers identified in this study were summarized as to reinforce the community consciousness, to form community opinion, to watch and to monitor community environment, to provide education and entertainment, and to contribute to the conveyance and promotion of community culture. 2. The general characteristic of local newspaper readers surveyed were; a) average distance from town to their village was 9.3 Km, b) average age was 29 years, c) about 75% of them were senior high school graduates, and d) about 96% of them participated in group activities. 3. About 45% of the respondents used television or radio for their moor sources of local news were TV or radio, while about 31% respondents used immunity newspaper for their moor sources of local news. About 67% of the respondents kept their readership over two years, and about 40% of them read community newspaper regularly at their home. 4. The results of content analysis showed drat the local newspapers were dealing with articles on cultural affairs, community consciousness, administrative and civic affairs, however, there were not enough educational news, and various kinds of general news in the community. 5. Survey also showed the most needed news were ; 1) political news including administrative and civic affairs, 2) economic news including sales and distribution, 3) social news including social problems on environmental pollution and community development works, 4) educational news including technology and information, 5) cultural news including guide to cultural and historical sites and local brief news. 6. In the evaluation of local newspaper, the readers were generally positive in valued roles of local newspaper in community relations, community development, promoting community cohesion and understanding of community members, and about 40% of the respondents were positive in predicting the bright future perspectives of local newspapers. 7. In the readers` evaluation of local newspaper, readers responded that local newspapers were very closely related to the community and residents, reflecting the current concerns of local population and recognizing the value of community media, and the contents of local newspaper were positively related to daily lives of community residents and opinions of overall community.

• Particle and aerosol research
• /
• v.16 no.2
• /
• pp.31-47
• /
• 2020

Although interest in air quality has increased due to the frequent occurrence of high-concentration fine particulate matter recently, the official fine particulate matter measuring network has failed to provide spatial detailed air quality information. This is because current measurement equipment has a high cost of installation and maintenance, which limits the composition of the measuring network at high resolution. To compensate for the limitations of the current official measuring network, this study constructed a spatial high density measuring network using the fine particulate matter simple measuring device developed by Observer, W-Station. W-Station installed 48 units on Jeju Island and measured PM_2.5 for six months. The data collected in W-Station were corrected by applying the first regression equation for each section, and these measurements were compared and analyzed based on the official measurements installed in Jeju Island. As a result, the time series of PM_2.5 concentrations measured in W-Station showed concentration characteristics similar to those of the environmental pollution measuring network. In particular, the results of comparing the measurements of W-Station within a 2 km radius of the reference station and the reference station showed that the coefficient of determination (R²) was 0.79, 0.81, 0.67, respectively. In addition, for W-Station within a 1 km radius, the coefficient of determination was 0.85, 0.82, 0.68, respectively, showing slightly higher correlation. In addition, the local concentration deviation of some regions could be confirmed through 48 high density measuring networks. These results show that if a network of measurements is constructed with adequate spatial distribution using a number of simple meters with a certain degree of proven performance, the measurements are effective in monitoring local air quality and can be fully utilized to supplement or replace formal measurements.

• The Journal of Korean society of community based occupational therapy
• /
• v.5 no.1
• /
• pp.55-62
• /
• 2015

Objective : The purpose of this study was to investigate the satisfaction of occupational therapy service for parents of children with disabilities using specialized child-care centers for disabled in Gyeongbuk. Methods : The subjects of this study were 104 parents who have experience in occupational therapy at 14 specialized child-care centers for disabled in Gyeongbuk. A questionnaire was conducted from July, 2014 to March, 2015. Descriptive statistics of frequency, mean, standard deviation, and One-Way ANOVA study were used to analyze data. Results : Disabled children got occupational therapy at first when they were 3.25 years, on average. Duration of occupational therapy use were 31.84 month, on average. The subjects determined to got occupational therapy mostly through consultation nurseries(40.4%). Most of them got speech therapy(78.0%) other than receiving occupational therapy service, responded very necessary to occupational therapy(69.3%). Satisfaction of occupational therapy service were 4.49 point at attitude of occupational therapists, 4.36 point at occupational therapy program, and 4.26 point at environment of occupational therapy room. Attitude of occupational therapists were the highest satisfied. Conclusion : This study would contribute to effective and meaningful occupational therapy through objective view

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.14 no.2
• /
• pp.89-97
• /
• 2012

This study was conducted to estimate forest site productivity and productive areas of Quercus acutissima and Quercus mongolica using environmental factors including climatic variables. Using the data set from digital forest site map and forest climatic map, a total of 42 environmental variables were regressed on site index for developing the best site index equations for Quercus acutissima and Quercus mongolica. Five to six environmental factors by species were selected as independent variables in the best site index equations. For the site index equations, three evaluation statistics (i.e., mean difference, standard deviation of difference, and standard error of difference) were applied to the test data set for the validation of the results, The site index equations fitted well to the test data set with relatively low bias and variation. As a result, it was concluded that the site index equations by species were well capable of estimating site quality. Finally, based on the site index equations, the productive areas by species were estimated by applying GIS technique to the digital forest maps. In addition, the distribution of productive areas by species was illustrated.

• Journal of Navigation and Port Research
• /
• v.37 no.2
• /
• pp.165-171
• /
• 2013

YoungDo bridge is the first suspension bridge in Busan which experienced several times repair and reinforcement after completion in 1934. The bridge is under demolition for extension and restoration work since 2011. The purpose of this research is to establish data base about modern concrete. The mix design of the concrete is like that cement : fine aggregate : coarse aggregate = 1 : 2 : 4 or 1 : 3 : 6 by the parts. The compressive strength is in the ranges from 50 to 55 MPa and the elastic modulus is in the ranges from 25 to 35 GPa. From the fact that the deviation is less than 10 %, considerably high quality control was conducted in those days. The carbonation depth is 5.92 cm at the bridge post and 14.3 cm at the machine room. That is why ocean environment keeps the high humidity. The diffusion coefficient of chloride ion through the pores in concrete is 1.052e-12 $m^2/s$ from the regression analysis using the experiment data. The water cement ration is estimated at approximately 35 % in case if the concrete using ordinary Portland cement.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.328-335
• /
• 2013

The purpose of this study was to evaluate the height of workbench in dental lab for ergonomic body type which dental technicians are suitable and suggest to effective improvement of workspace. For this purpose, we measured the height, weight, body sizes of total 77 junior majoring in dental laboratory science where they study school located in Gyeonggi and Chungcheong area and we research uncomfortable body type when they had a clinical training. For comparative analysis we had visited 15 dental lab and 2 dental lab of general hospital and we had measured the height of workbench and desk including chair and then We had statistical analysis measured value. Especially we analyzed the important factor causing inconvenience for work environment. As a result, we had examined, we found following results The sand table was the most uncomfortable equipment, when they have clinical training. There is no correlation between sexual characteristics of junior in college and selection of uncomfortable equipment. It is reasonable to assume that sand table which is lower than recommended height brings out inconvenience. It is analyzed that the optimum height of sand table in dental lab for junior in college is lower than the recommended height. The optimum height of sand table in dental lab has deviation according to height of junior in college. The height of worktable in dental lab was lower than recommended height. The recommended range could not apply to posture of dental technician with different height uniformly.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.6
• /
• pp.108-115
• /
• 2008

The wear on engine valve and seat insert is one of the most important factors affecting engine performance. The engine valve and seat insert must be able to withstand the severe environment that is created by: high temperature exhaust gases generated while the engine is running, rapid movement of the valve spring, high pressure generated in the explosive process. In order to study such problems, a simulator has been developed to generate and control high temperatures and various speeds during motion. The wear simulator is considered to be a valid simulation of the engine valve and seat insert wear process with various speeds during engine activity. This work focused on the test of various degrees of wear on four different exhaust valve materials such as HRV40, HRV40-FNV (face nitrided valve), STL #32, STL #6,. Throughout all tests performed in this study, the outer surface temperature of the seat insert was controlled at $350^{\circ}C$, the cycle number was $4.0{\times}10^6$, the test load was 6860 N, the fuel was LPG the test speed was 20 Hz (2400 RPM) and the seat insert material was HVS1-2. The mean (standard deviation) maximum roughness of the exhaust valve and seat insert was $25.44\;(3.16)\;{\mu}m$ and $27.53\;(3.60)\;{\mu}m$ at the HRV40, $21.58\;(2.38)\;{\mu}m$ and $25.94\;(3.07)\;{\mu}m$ at the HRV40-FNV, $36.73\;(8.98)\;{\mu}m$ and $61.38\;(7.84)\;{\mu}m$ at the STL #32, $73.64\;(23.80)\;{\mu}m$ and $60.80\;(13.49)\;{\mu}m$ at the STL #6, respectively. It was discovered that the maximum roughness of exhaust valve was lower as the high temperature hardness of the valve material was higher under the same test conditions such as temperature, test speed, cycle number, test load and seat insert material. The set of the HRV40-FNV exhaust valve and the HVS1-2 seat insert showed the best wear resistance.

• Journal of KIISE:Information Networking
• /
• v.36 no.5
• /
• pp.413-424
• /
• 2009

Wireless sensor network is based on an event driven system. Sensor nodes collect the events in surrounding environment and the sensing data are relayed into a sink node. In particular, when events are detected, the data sensing periods are likely to be shorter to get the more correct information. However, this operation causes the traffic congestion on the sensor nodes located in a routing path. Since the traffic congestion generates the data queue overflows in sensor nodes, the important information about events could be missed. In addition, since the battery energy of sensor nodes exhausts quickly for treating the traffic congestion, the entire lifetime of wireless sensor networks would be abbreviated. In this paper, a new congestion control method is proposed on the basis of genetic algorithm. To apply genetic algorithm, the data traffic rate of each sensor node is utilized as a chromosome structure. The fitness function of genetic algorithm is designed from both the average and the standard deviation of the traffic rates of sensor nodes. Based on dominant gene sets, the proposed method selects the optimal data forwarding sensor nodes for relieving the traffic congestion. In experiments, when compared with other methods to handle the traffic congestion, the proposed method shows the efficient data transmissions due to much less queue overflows and supports the fair data transmission between all sensor nodes as possible. This result not only enhances the reliability of data transmission but also distributes the energy consumptions across the network. It contributes directly to the extension of total lifetime of wireless sensor networks.

• Journal of Advanced Navigation Technology
• /
• v.17 no.5
• /
• pp.516-523
• /
• 2013

In this paper, The path loss model of Air Traffic Control(ATC) telecommunication radio channel has been studied at the Incheon International Airport(IIA) with the terminal with two antlers. We measured two frequencies among VHF/UHF channel bands. The transmitting site radiated the Continuous Wave(CW). The propagation measurement was taken using the moving vehicle equipped with receiver and antenna. The transmitting power, frequency and antenna height are the same as the current operating condition. The path loss exponent and intercept parameters were extracted by the basic path loss model and hata model. The path loss exponents at passager terminal areas were 3.32 and 3.10 respectively in 128.2 MHz and 269.1 MHz. The deviation of prediction error is 9.69 and 9.65. The new path loss equation at the terminal area was also developed using the derived path loss parameters. The new path loss was compared with other models. This result will be helpful for the ATC site selection and service quality evaluation.