• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.114-119
• /
• 2001

The subjective unwantedness felt from the noise sources in living and office environment has been evaluated by investgating the upper／lower limit of perceptual loudness of the noise. The limits were selected by the subject and the noise sources were analyzed to find out whether there is any correlation with Zwicker parpmeters and ACF fastors. It was found that the loudness of vacuum cleaner noise does not influence its perceived noiseness. Noises implicated in human such as floor walking noise and talking sound, are the most irritating noise in office environment.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.163-168
• /
• 2011

Noise map is drawn up under launch environment through analyzing jet noise of guided weapon in this research. This has an important significance in terms of having an opportunity to look at influence of noise which is caused by guided weapon in the surrounding environment. In this paper, the magnitude of jet noise that was measured by using microphone and the result of numerical analysis that was gained by using ENPro which is environment noise prediction program are shown. At this point estimation of noise source was based on ISO 9613. Finally noise map derived from results mentioned above will become useful material when setting safety guide for protecting hearing loss of operator of weapon system in the future.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.670-673
• /
• 2005

For the comfortable housing life, an urban environment should give comfort and pleasantness to people living in house and in city. There are lots of environmental conditions in city affecting house and life and most of all the noise pollution have been become factor that makes people's life hard without need to say. Recently researches have been performed to create comfortable urban environment and a study on the evaluation of urban environmental sounds is now undergoing. This study aimed to analyse the subjective characteristics through the subjective evaluation to the sounds measured with physical parameters and eventually to find out evaluation method for urban environmental sounds. Vocabularies applied to previous studies were used for the subjective evaluation and sound sources recorded in specific places were presented with picture at the same time.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.355-358
• /
• 2005

This study aims at comparing the noise characteristics of conventional and functional hood. Measurement and analysis was carried out in anechoic room and actual environment. In case of anechoic room, intensity and sound pressure level were measured. In case of actual environment sound pressure level under different apartment size and distances. Sound pressure level of actual environment was higher than that of anechoic room. It is concluded that noise characteristics were different from each other in case of anechoic room and actual environment.

• The Korean Nurse
• /
• v.12 no.1 s.63
• /
• pp.57-60
• /
• 1973

• Structural Engineering and Mechanics
• /
• v.75 no.4
• /
• pp.435-444
• /
• 2020

Ultrasonic guided wave testing is a very promising non-destructive testing method for rails, which is of great significance for ensuring the safe operation of railways. On the basis of the semi-analytical finite element (SAFE) method, a analytical model of 59R2 grooved rail was proposed, which is commonly used in the ballastless track of modern tram. The dispersion curves of ultrasonic guided waves in free rail and supported rail were obtained. Sensitivity analysis was then undertaken to evaluate the effect of rail elastic modulus on the phase velocity and group velocity dispersion curves of ultrasonic guided waves. The optimal guided wave mode, optimal excitation point and excitation direction suitable for detecting rail integrity were identified by analyzing the frequency, number of modes, and mode shapes. A sinusoidal signal modulated by a Hanning window with a center frequency of 25 kHz was used as the excitation source, and the propagation characteristics of high-frequency ultrasonic guided waves in the rail were obtained. The results show that the rail pad has a relatively little influence on the dispersion curves of ultrasonic guided waves in the high frequency band, and has a relatively large influence on the dispersion curves of ultrasonic guided waves in the low frequency band below 4 kHz. The rail elastic modulus has significant influence on the phase velocity in the high frequency band, while the group velocity is greatly affected by the rail elastic modulus in the low frequency band.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.2
• /
• pp.129-138
• /
• 2023

The proportion of agricultural products handled through the Agricultural Products Processing Center (APC) is also steadily increasing every year, and in the case of Seongju Korean melon, a total of 10 APCs of Nonghyup and farming association corporations are in operation, and the distribution ratio is about 60% based on total production. In this study, Seongju Korean melon was selected as a target to analyze the environment load during carrying (production farm ~ APC) in the production area and the transport environment load during distribution of domestic fruits, and to analyze the environmental load for handling at APC. The vertical average vibration intensity (overall G_rms of 1~250 Hz) of truck transport measured at three transport routes from Seongju Korean melon producer ~ APC, Seongju ~ Seoul and Seongju ~ Jeju was about three times larger than that in the lateral direction and 4.5 times larger than that in the longitudinal direction, respectively. The frequency of occurrence of high-amplitude events (G) in the vertical direction compared to the measuring time was deeply related to pavement conditions in the order of unpaved farm-roads, concretepaved farm-roads, and asphalt-paved main-roads, but overall G_rms for the entire frequency band is believed to have a greater impact on vehicle traveling speed than road conditions. On the other hand, the difference in the size and direction of the vibration intensity measured by the forklift truck's main-body and the attachment (fork carrier) during handling at Seongju Korean melon APC was clear, and the vibration intensity of the forklift truck's main-body was largely affected by the stiffness of the fork and the mast according to the handling weight. Based on the field-data of the transport environment during domestic distribution measured through this study, it is believed that it is possible to develop a lab-based simulation protocol for appropriate packaging design.

• Journal of the Society of Disaster Information
• /
• v.20 no.3
• /
• pp.549-562
• /
• 2024

Purpose: In this study, numerical analysis was conducted to verify the vibration reduction effect of installing vibration barriers under various installation conditions to mitigate train-induced vibrations from the GTX. Method: To identify the factors influencing vibration reduction among the installation conditions, the stiffness ratio of the filling material and the installation depth of the barrier were varied. Result: The study results indicated that using ductile filling materials provided superior vibration reduction compared to hard filling materials. The vibration reduction effect was found to be more significant when the stiffness ratio between the ground and the filling material was closer to zero. Additionally, the deeper the installation depth of the barrier, the better the vibration reduction effect. Conversely, if the barrier was installed too shallowly, vibration at the measurement point was amplified. Conclusion: The optimal installation condition for vibration reduction was found to be a stiffness ratio of 0.08 and an installation depth of 15 meters, resulting in a vibration reduction rate of 60.34% at a measurement point 10 meters away from the vibration source.

• KIEAE Journal
• /
• v.1 no.2
• /
• pp.13-19
• /
• 2001

Recently, With the increase of income level, many people desire to have agreeable and quiet surrounding. However, the extent and time of the exposure to construction noise and vibration is increasing, which is a factor that ruins the quietness of the surrounding and increasingly raises interests in its effects. In this point, this study attempts to survey the characteristics of construction vibration by SD(Sand drain) method in construction field. In addition, the result of study is presumed to be usable as the fundamental materials for an efficient counter-plan in case of the public resentment in relations to the construction vibration occurring henceforth.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.250-254
• /
• 2002

It is conducted to analyze vibration loads on KSR-III(KSR: Korea Sounding Rocket) and its major segments during their ground transportation and various handling process. These loads may be different from the real flight environment. Inadequate assessment of these loads can cause not only local damages on the rocket system but also the critical problem like flight mission failure. Therefore, transportation and handling loads must be considered during design and attenuated to ensure that the rocket structural damage does not occur. This work is concerned with the generation of criteria and prediction of transportation and handling loads for KSR-III. The results show that the shipping container is well designed to satisfy the design requirements. The maximum vibration level recorded during whole transportation and handling for KSR-III is less than 2g, the criteria of KSR-III movement condition.