• Korean Journal of Environmental Agriculture
• /
• v.31 no.2
• /
• pp.170-174
• /
• 2012

BACKGROUND: Inappropriate discharge of wastewaters and industrial effluents are becoming detrimental to the aquatic environment. The presence of toxic substances on wastewaters can be detected by physicochemical and biological methods. However, physicochemical methods do not give any information about biological toxicity. Therefore, in this study we tried to detect the presence of toxic substance on waters using sulfur-oxidizing bacteria (SOB) as a bioassay. MATERIALS AND RESULTS: The SOB biosensor was first stabilized using synthetic stream water and operated in both continuous and semi-continuous mode. When the SOB biosensor was operated in continuous mode, the effluent electrical conductivity (EC) stabilized at~1.72 dS/m. While in the case of semi-continuous, the EC stabilized at~0.6 dS/m. The SOB system was also operated at different reaction times to ascertain the shortest reaction time for monitoring the toxicity. Finally, the SOB biosensor was fed with nitrite as toxic substance. When 5 mg/L of nitrite was added to the SOB system, the EC decreased immediately. However, the EC recovered after few cycle. CONCLUSION: This study shows that the SOB biosensor can be used as warning system to protect aquatic environment from hazardous materials. Although SOB biosensor can not give specific information about the toxic substances, it can assess whether the water is toxic or not.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.20 no.3
• /
• pp.34-40
• /
• 2012

This research has looked into the treatment process of wood waste generated from industrial waste within the region and in order to modify the problem that may occurred during the mass balance were analyzed for development of suitable solid waste recycling network regionally. As as result, quite amount of wood waste are being transferred to another region, even though a treatment facility's capacity could bear the total amount of waste generated within the area. Although the wood waste could be treated locally, it is analyzed that amount of wood waste are being transferred due to inefficient and irrational processing system between regions. It is assumed that $CO_2$ generated and loss of unnecessary fuel cost from these inefficient system is quite a lot and in order to modify this disorganized system, it will not inevitable to treat the waste based on the characteristics of each regions. Also, the wood waste recycling system should be studied with the efficient, environmental friendly processing and delivering network by minimized transfer distance and local systemizing the waste treatment system.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.3
• /
• pp.181-188
• /
• 2013

The increase of carbon dioxide ($CO_2$) emission is known as one of the major causes of global warming, and it has a strong influence on the global environment. Therefore many researchers and politicians have tried to regulate the $CO_2$ emission. In regards to the matter, the IMPACT (Inclusive Marine Pressure Assesment and Classification Technology) committee under the Japan Society of Naval Architects and Ocean Engineers (JASNAOE) has developed an inclusive environmental impact assessment index, so-called "Triple I(III)", in order to assess the environmental impact including economic factors due to the artificial development of marine. In this study, III was applied to compare between the environmental impact of $CO_2$ emitted by container vessels during their life-cycle period and economic benefit due to their operating. Furthermore, III was also applied to assess the comprehensive environmental impact for the cases with various capacities of container vessels and different sailing route. From the results, the case for shortening of the sailing route is more effective to get the advantageous assessment results of III than the case for varying the size of vessels.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.12
• /
• pp.741-749
• /
• 2017

This study aims to provide the technical considerations and implications for the development of soil vulnerability assesment tool based on the review of existing tools and case studies applied both domestically and internationally. For this study, we specifically investigated the basic theories and major features implemented in the screening models abroad. In contrast, one case study of prioritizing the vulnerable districts was presented to identify the research trends in Korea. Our literature review suggested that the characteristic of target areas and contaminants needed to be properly incorporated into soil vulnerability assessment because the current tools in Korea neglected these properties which prevented this tool from being used as a correct measure of soil management and prevention. We also reached the conclusion that in terms of technical aspect, the soil vulnerability assessment tool should be developed based on the physical theory and environmental data that were varied over space and time so that the end-users were able to readily and effectively screen soil vulnerability over large areas. In parallel with technical improvement, great effort needed to be devoted to develop an integrated environmental information system that increased the availability of data and shared various types of environmental data through enhanced multi-agency collaboration.

• The Journal of Engineering Geology
• /
• v.16 no.2 s.48
• /
• pp.125-134
• /
• 2006

In order to establish the in-situ application of the artificial storage and recovery (ASR) technology which is used the property of the aquifer storage of groundwater. We carried out to the in-situ experiments such as borehole TV logging, pumping test and artificial hydraulic fracturing in volcanic island, Ulleungdo. In-situ experiments were conducted to divide the before- and after-hydraulic fracturing. Pumping test was achieved to confirm the two fracture zones, GL-13m and GL-21m, which are determined by the borehole TV logging. From the results of the before- and after-pumping tests, the hydraulic connectivity was confirmed to locate at GL-13m in the residual deposit zone of pumice media as alluvium. However, in the bedrock tone at GL-21m the hydraulic connectivity could be considered to faulty. Consequently, in this study area the artificial recharge has a little unsatisfied to geo-structural condition and desired to more detail investigation works.

• Journal of Korean Port Research
• /
• v.13 no.1
• /
• pp.123-132
• /
• 1999

It is very important to quantitatively assess the movement of sea water and pollutant dispersion before or after constructing shore structures such as breakwater considering marine environment and long-term utilization of those structures. This assesment is possible through the use of simulation models designed to predict water movement and pollutant dispersion in a certain area. In this study the numerical computations were carried out to predict the sea water quality in the Ilgwang Harbor located at the east coast of Pusan. The flow patters were investigated before and after the development of Ilgwang Harbor. The computational models adopting ADI Method (Alternating Direction Implicit Method) were used here and were already verified from the previous studies. As a results of this study the tidal exchange in Ilgwang Harbor after development proved to be worse due to the increased semi-enclosed at the harbor limit. In order to improve the water quality of this area after development a new method was proposed to improve water quality in the semi-enclosed bay by creation and control of tidal residual currents. For this purpose the unsymmetric structures so called bottom roughness were introduced in this study. The simulation was carried out on the basis of the study by Komatsu et. al. and Gug and we made a conclusion that it is possible to generate a new tidal residual current and to increase the tidal exchange by application of bottom roughness arrangement.

• Journal of Environmental Impact Assessment
• /
• v.24 no.3
• /
• pp.260-277
• /
• 2015

The object of this study was the climate change sensitivity assessment of Korean Fir and Khinghan Fir as a representative subalpine plant in South Korea. Using species distribution models, we predicted the probability of current and future species distribution. According to this study, potential distribution that have been predicted based on the threshold (MTSS) is, Khinghan Fir was higher loss rate than Korean Fir. And in the climate change sensitivity assessment using the scalar sensitivity weight ($W_{is}$), $W_{is}$ of Korean Fir was higher relatively than the sensitivity of Khinghan Fir. When using the species distribution models as shown in this study may vary depending on the probability of presence data and spatial variables. Therefore should be prior decision studies on the ecological environment of the study species. Based on this study, if it is domestic applicable climate change sensitivity assessment method is developed. it would be important decision-making to climate change and biological diversity of adaptation policy.

• Journal of Environmental Impact Assessment
• /
• v.17 no.1
• /
• pp.47-56
• /
• 2008

Total Maximum Daily Load(TMDL) is a core basin management system to assign total emissions of pollutants to unit basin and emission source within a limit of the target water quality and to secure sustainability. considering "Environment and development" together. By current technical guidance of TMDL, the water quality in the riverbed of which the target water quality is noticed, must achieve the target; and the water quality standard for evaluating achievement of the target should be prescribed as non-excessive probability quality of water on the basis of the pertinent water quality documents. Therefore, the study calculated the target water quality by each unit basin which the target water quality must be noticed through the analysis of probability for water quality documents in rivers at the time of establishing a plan, and the study evaluated the achievement possibility of the target water quality by analyzing and comparing the target water quality plan with the standard water quality to evaluate the achievement of the target water quality. As the result, applying the proposed method to Mihocheon River system, it is concluded that selected the target water quality (Each BOD 3.3mg/1 and BOD 3.0mg/1) in Miho A and Musim A is available. Of course, it showed that the target water quality: BOD 2.5mg/1 in Miho A and BOD 3.0mg/1 in Musim A, could be achieved if the small reduction in B unit area was implemented.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.6
• /
• pp.607-611
• /
• 2001

Ultrasonic inspection system consist of the operator, equipment and procedure. The reliability of results in ultrasonic inspection is affected by its ability. Furthermore, the reliability of nondestructive testing is influenced by the inspection environment, materials and types of defect. Therefore, it is very difficult to estimate the reliability of NDT due to the various factors. In this study, the probability of detection by logistic probability model and Monte Carlo simulation is used for the reliability assessment of ultrasonic inspection. The utility of the NDT reliability assesment is verified by the analysis of the data from round robin test nth these models.

• Journal of Radiation Protection and Research
• /
• v.28 no.3
• /
• pp.207-213
• /
• 2003

Carbon-14 is one of the major radionuclides released by CANDU Nuclear Power Plants(NPPs). It is almost always emitted as gas through the stack. From CANDU NPPs about 95% of all carbon-14 is released as carbon dioxide. Carbon-14 is a low energy beta emitter which, therefore, gives only a small skin dose from external radiation. As carbon dioxide Is physiologically rather inert gases for man's metabolism, the inhalation dose is probably less than 1 % of the ingestion dose. But this source of carbon-14, formed in a closed, nor-oxidative environment, was subsequently released into the workplace as an insoluble particulate when these systems were opened lip for re-tubing at CANDU NPPs. As a part of the improvement of dosimetry program at Wolsong Nuclear Power Plants, the carbon-14 metabolism based on references was investigated and studied to setup the internal dosimetry program due to inhalation of carbon-14.