• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.2
• /
• pp.258-266
• /
• 2012

Recently, Acoustic Emission (AE) technique is widely applied to develop the early fault detection system, and the problem about a signal processing method for AE signal is mainly focused on. In the signal processing method, envelope analysis is a useful method to evaluate the rolling element bearing problems and Wavelet transform is a powerful method to detect faults occurred on gearboxes. However, exact method for AE signal is not developed yet. Therefore, in this paper, two methods, which is Hilbert transforms (HT) and Hilbert-Huang transforms (HHT), will be compared for development a signal processing method for early fault detection system by using AE. AE signals were measured through a fatigue test. HHT has better advantages than HT because HHT can show the time-frequency domain result. But, HHT needs long time to process a signal, which has a lot of data, and has a disadvantage in de-noising filter.

• Korean journal of applied entomology
• /
• v.34 no.3
• /
• pp.218-223
• /
• 1995

A nuclear polyhedrosis virus isolated from the oriental tobacco budworm larvae, Helicoverpa assulta (Guenee) was characterized by electron microscopy, SDS-PAGE, restriction endonuclease analysis and cross infectivity. The shape of a polyhedron was $1.0\mu\textrm{m}$ in average with icosahdral outline, and the virus particle was $65nm\times300nm$ in average with rod-shape. The nuclear polyhedrosis virus was contained a single nucleocapsid within a viral envelope embedded in a polyhedron. The polyhedral protein was composed of a single polypeptide with a M.W. of 31 Kd. The genome size of the virus by restriction endonuclease analysis was about 120 Kb. Among several nuclear polyhedrosis viruses, the nuclear polyhedrosis virus from Helicoverpa assulta (HaNPV) and Autographa california nuclear polyhedrosis virus (AcNPV) were infected the oriental tobacco budworm larvae.

• Journal of the Korean Society for Railway
• /
• v.16 no.6
• /
• pp.447-453
• /
• 2013

Since PSDs(Platform Screen Doors) are set up at many subway stations, their design related to safety has become gradually important. In particular, the interference check with a running railway vehicle is the most important of performance indices because the collision between PSDs and vehicles can be dangerous for passengers in the car and on platforms. When the train comes into a station with a curvature, the passenger car has a large translational and rotational motion and the displacement is enough for coming in contact with PSD. The performance is affected by many design parameters such as rail design parameters and vehicle velocity. This study proposes dynamic analysis models for railway vehicles and rails. Some parameters were also considered in the models to determine their influence on the performance.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.3
• /
• pp.231-238
• /
• 2020

This paper investigates the soundness of porcelain insulators associated with the acoustic emission (AE) technique. The AE technique is a popular non-destructive method that measures and analyzes the burst energy that occurs mainly when a crack occurs in a high-frequency region. Typical AE methods require continuous monitoring with frequent sensor calibration. However, in this study, the AE technique excites a porcelain insulator using only an impact hammer, and it applies a high-pass filter to the signal frequency range measured only in the AE sensor by comparing the AE and the acceleration sensors. Next, the extracted time-domain signal is analyzed for the damage assessment. In normal signals, the duration is about 2ms, the area of the envelope is about 1,000, and the number of counts is about 20. In the damage signal, the duration exceeds 5ms, the area of the envelope is about 2,000, and the number of counts exceeds 40. In addition, various characteristics in the time and frequency domain for normal and damage cases are analyzed using the short-time Fourier transform (STFT). Based on the results of the STFT analysis, the maximum energy of a normal specimen is less than 0.02, while in the case of the damage specimen, it exceeds 0.02. The extracted high-frequency components can present dynamic behavior of crack regions and eigenmodes of the isolated insulator parts, but the presence, size, and distribution of cracks can be predicted indirectly. In this regard, the characteristics of the surface crack region were derived in this study.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.5
• /
• pp.529-536
• /
• 2019

In this paper, the signals of the sensor for extracting characteristic parameters of the rotor are collected and the performance of the extraction technique is analyzed. To this end, a vibration test league was developed for conducting model tests to analyze the signal characteristics under normal operation. As a result, it is judged that no change in the measured the raw data amplitude will occur in the acceleration sensor with the unbalanced mass measured from the acceleration sensor. Performing FFT showed a significant increase in amplitude of the rotational frequency of 20 Hz as the unbalanced mass increased. The analysis results according to the change in the unequal mass of the speed sensor also showed a significant increase in the 1X Harmonics component, such as the acceleration sensor. There was no change in the amplitude of the acceleration sensor data when the misalignment occurred, and for the Envelope data, the amplitude of 2X (40 Hz) was increased depending on the degree of misalignment. The velocity sensor at change of misalignment also showed similar results to the acceleration sensor, and the peak was reduced at 600 Hz as the load increased in the frequency spectrum.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.12
• /
• pp.125-132
• /
• 2020

Embedded joints in the rock mass are a major constituent influencing its mechanical behavior. Numerical analysis requires a rigorous modeling methodology for the rock mass with detailed information regarding joint properties, orientation, spacing, and persistence. This paper provides a mechanical model for a jointed rock mass based on the implicit joint-continuum approach. Stiffness tensors for rock mass are evaluated for an assemblage of intact rock separated by sets of joint planes. It is a linear summation of compliance of each joint sets and intact rock in the serial stiffness system. In the application example, kinematic analysis for a planar failure of rock slope is comparable with empirical daylight envelope and its lateral limits. Since the developed implicit joint-continuity model is formulated on a continuum basis, it will be a major tool for the numerical simulations adopting published plenteous thermal-hydro-chemical experimental results.

• Korean small business review
• /
• v.38 no.3
• /
• pp.165-184
• /
• 2016

This paper aims at analysing the effects of venture business finance supporting programs on efficiency and productivity of the venture firms, on the basis of the data envelope analysis (DEA) using data of 406 firms in the 2013 Venture Business Detailed Survey of Small and Medium Business Administration. The conclusions are summarized as follows. First of all, the efficiency of government finance supported venture firms is higher than that other venture firms. The increase of productivity in venture firms enjoying government supporting programs is higher than that in venture business without government supporting programs, especially in the technical progress rather than in efficiency improvement. Also the R&D supporting programs for venture firms lead to an increase in productivity. Taking the above results into consideration, government's venture supporting programs are evaluated to be effective in terms of an increase of productivity and the proper scope for fragile venture firms.

• Journal of the Society of Naval Architects of Korea
• /
• v.61 no.2
• /
• pp.125-134
• /
• 2024

The Safe Operating Envelope (SOE) combined with Short-Take-Off and Vertical Landing (STOVL) performance is an essential consideration of a light aircraft carrier for design of hull shape with excellent seakeeping performance in terms of naval air operations as well as traditional naval ship missions such as Transit and Patrol (TAP), and Replenishment at Sea (RAS) and so on. A variety of procedures are systematically combined to determine SOE considering rather complicated missions associated with operation of aircraft onboard. The evaluation of take-off and landing safety missions onboard should consider wind effect on deck and severer seakeeping indices and standards compared with conventional naval ships. In order to support take-off and landing missions, various support activities of the crews are required. So, additional evaluation is needed for indicators such as MSI(Motion sickness Index) and MII(Motion Induced Interruptions), which are quantitative indicators of work ability that appear as a result of motion response. In this study, a standard procedure is developed including the seaworthiness performance indicators, standards, and evaluation procedures that should be considered during design of STOVL aircraft carrier. Analysis results are discussed in terns of air-wake on deck as well as seakeeping indices associated with design parameter changes in view of conceptual design of a light aircraft carrier.

• Journal of KIBIM
• /
• v.2 no.2
• /
• pp.17-26
• /
• 2012

This paper presents the results of a theoretical energy analysis of a research test bed called the Zero Net Energy Test House (ZNETH) in Omaha, Nebraska in U.S.A. The ZNETH project is being designed and built with the goal of consuming a negligible amount of energy by offsetting remaining usage after energy conservation. The theoretically consumed and generated energy levels were analyzed using energy modeling software programs. By integrating a highly graphical and intuitive analysis with a Building Information Model(BIM) of the house, this investigation introduces strategies to include sustainable materials and systems to predict energy generation with a case study of ZNETH. In addition, this paper introduces parametric analyses for better envelope design and construction material selection by analyzing simulated energy consumption with various parametric inputs, e.g., material types, location, and size. It was found that the current design of ZNETH does not meet its goal of zero net energy. Sugeestions are presented to assist ZHETH in meeting its net zero energy goal.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.565-570
• /
• 2000

The objective of this paper is to analyse the high-strength concrete columns subjected to reversed cyclic and axial loads by using nonlinear analysis model and compare the experimental results with analysis. The analytical parameters are the compressive strength of concrete, spacing of lateral reinforcement and lateral reinforcement ratio. In this study, the proposed analytical model takes ito account the influence of confined concrete, tension stiffening and strain hardening of steel. The high-strength concrete columns are used to model fiber section element. The analysis results are shown comparatively good prediction on envelope curve, accumulative dissipated energy, deformability and so on.