• Particle and aerosol research
• /
• v.13 no.3
• /
• pp.105-110
• /
• 2017

Real-time measurements of fine particles from stack emission gases are necessary due to the needs of continuous environmental monitoring of PM10 and PM2.5. The porous tube dilutor using hot and cold dilutions was developed to measure fine particles without condensable particles from highly humid emission gases and compared to the commercialized ejector-type dilutor. Particle size distributions were measured at the emission gases from a diesel engine and a coal-fired boiler. The porous tube dilutor could successfully measure the accumulation mode particles including relatively large particles more than $3{\mu}m$ without nuclei particles, while the ejector dilutor detected some condensable particles and could not detect large particles. The porous tube dilutor could successfully remove the already condensed water droplet particles generated by a humidifier in a $30m^3$ chamber.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.3
• /
• pp.237-243
• /
• 2015

In this study, the effects of the mixing ratio of emulsified fuel on the droplet evaporation and spray behavior characteristics were analyzed. A surfactant comprising span 80 and tween 80 mixed at a 9:1 ratio was used for the emulsified fuel. The fuel and surfactant were mixed at a ratio of 3:1 for the emulsified fuel. In addition, considering the mixing ratio of the surfactant, the mixing ratio of $H_2O_2$ in the emulsified fuel was set as EF (emulsified fuel)0, EF2, EF12, EF22, EF32, and EF42. To observe the evaporation characteristics, droplets of the emulsified fuel were dropped on a heating plate and observed using scattered light and a Schlieren system. In addition, to analyze the effect of the $H_2O_2$ mixing ratio, the behavior characteristics of the evaporative free spray were investigated in the mixing ratio range of EF0 to EF22 using a constant volume chamber with heaters. Consequentially, it was found that in the case of EF22, the free spray development of the emulsified fuel was faster than that of EF0 (diesel only) because of the promotion of the evaporation due to the phase change in the peroxide contained in the emulsion fuel.

• Journal of Advanced Navigation Technology
• /
• v.15 no.5
• /
• pp.687-695
• /
• 2011

The defect caused by the software industry that is the source of knowledge-centric, information-centric and technology-centric affects an engine which operate a major role for operation of aircraft. Therefore, we should minimize the danger from the defect by strengthening the stability of aviation through the stability analysis of software. In this paper, we examine the laws and systems about the aircraft defects and software safety and propose the enhancement and the enactment of the law or measures to strengthen aviation safety. We should the existing law or system as items, such as the revision related to the safety analysis, standards of quality assurance including safety, application of quality assurance that you must attach the safety analysis report, assessment of detailed instructions of certification authorities. In addition, we should enact the new law and system as items such as the mandatory software evaluation and certification, continuous assessment based on the software life cycle, mandatory introduction of a standardized development methodology, strengthening of advanced workforce system. We can expect the improvement of software quality and an enhanced aviation safety by improving existing laws or systems and enacting new laws or systems.

• Journal of the Korean Society for information Management
• /
• v.34 no.3
• /
• pp.89-107
• /
• 2017

This study aims to compare information seeking behavior of 1300K users on PC and mobile phone. Transaction logs of 1300K, a major Korean shopping search engine, were analyzed. These transaction logs were collected over 1 month period, from April 1 to April 31, 2016. The results of this study show that there are a little more mobile sessions than PC sessions. Users conducted slightly more browsing on PCs than mobile phones, whereas users submitted queries more than two times on mobile phones than on PCs. Users clicked more search results on PCs than mobile phones, whereas users made important decision makings such as product purchases more on mobile phones than PCs. Top queries and categories were similar between PCs and mobile phones. Queries and categories on mobile phones were more focused than queries on PCs. Overall, mobile search behavior is more simple, passive, and focused than PC search behavior. The results of this study can be implemented to the effective improvement and development of search services for different devices.

• Journal of Satellite, Information and Communications
• /
• v.12 no.4
• /
• pp.78-86
• /
• 2017

Japan has a lot of interest about weapons systems development of surrounding national and has invested heavily in securing intelligence assets to get information about them, because of conflict issues between Japan and Russia with four northern islands, China with Senkaku Islands and entry policy into the Pacific. Japan has used a large budget to detect and intercept ballistic missile for reasons of the launch of the Taepodong missile in 1998. After took over SIGINT equipments which U.S. force had operated in 1950s~1960s, Japan made a technological analysis and advanced IT technology to produce superior equipments. Japan's SDF has installed them in 19 locations across Japan. In addition, Japan's JASDF has installed advanced early warning RADAR to detect aircraft and high speed ballistic missile entering JADIZ with S-band in 28 locations across Japan. It is possible to detect missile launch preparations, engine tests, and launch moments at any time for operation of 6 satellites high resolution reconnaissance system and 6 aegis ships. In close cooperation with the US, Japan is accessible to the SBIRS networks which detects the launch of a ballistic missile in neighboring countries. In the future, Because the United States wants Japan to act as part of the United States in East, south Asia, it is believed that the exchange of intelligence on the surrounding countries between two countries will be enhanced.

• The Journal of the Korea Contents Association
• /
• v.7 no.4
• /
• pp.1-9
• /
• 2007

Cellular operators develop high speed mobile internet and multi-function cellular phones to activate new business model based on mobile internet services. Domestic cellular operators evolve their mobile networks from cdma2000-1x and EvDo to HSDPA to activate high speed mobile internet services. They also develop mobile internet platforms such as WIPI, BREW, and J2ME on multi-function cellular phones having multimedia solutions such as camera, MP3, MPEG, 3D game engine, DMB, PAN such as bluetooth, IrDA, W-LAN, and location information using GPS. But, content providers have problems of redevelopment of the same mobile internet application on different mobile internet platforms provided by cellular operators. In this paper, we develop conversion solutions for interoperability of mobile internet applications on WIPI and BREW using an one-pass compiler. We confirm the performance the proposed conversion solutions for the API conversion rate, the converted file size, and the full conversion time using the popular mobile games which are the killer applications on WiPI and BREW.

• The Journal of the Korea Contents Association
• /
• v.18 no.9
• /
• pp.102-115
• /
• 2018

The world's major countries carry forward strategies for enhancing industrial competitiveness, resulting in the fourth industrial revolution while a new growth engine is required to deal with the slow growth of global economy and declining productivity. Artificial intelligence (AI) is regarded as a core technology of the fourth industrial revolution. AI is expected to be implemented rapidly in advertising and media industries. However, it is hard to find an effective way to implement AI in these industries, especially because of how quickly the AI market changes and develops. Therefore, this study seeks the possible industrial influence of AI in advertising and media industries and invigoration plan for AI, by an in-depth interview with 10 professionals who lead the AI market. First, it was analyzed to explore the macroscopic side of the AI market through P (Politics), E (Economy), S (Society), and T (Technology). Also, the applicability of AI in advertising and media industries was explored by analyzing its S (Strength), W (Weakness), O (Opportunity), and T (Threat).The result indicates that it is necessary to build up a nation-wide construction of infrastructure for the fourth industrial revolution to invigorate AI in advertising and media industries. Moreover, a social environment capable of overcoming a hyper-connected society and social risks should be fostered. Lastly, it is urgent for both the industrial and academic world to diagnose the influence of AI in advertising and media industries, to anticipate the future in accordance with technological advance, set a proper direction, to invest actively for technical development of AI, and to formulate innovative policies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.585-591
• /
• 2017

Turbocharging is widely used in diesel and gasoline engines as an effective way to reduce fuel consumption. But turbochargers have turbo-lag due to mechanical friction losses. Bearing friction losses are a major cause of mechanical friction losses and are particularly intensified in the lower speed range of the engine. Current turbochargers mostly use oil bearings (two journal bearings and one thrust bearing). In this study, we focus on the bearing friction in the lower speed range. Experimental equipment was made using a drive motor, load cell, magnetic coupling, and oil control system. We measured the friction losses of the turbocharger while considering the influence of the rotation speed, oil temperature, and pressure. The friction power losses increased exponentially when the turbocharger speed increased.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.2
• /
• pp.98-108
• /
• 2006

The vessels, already built and is operating in Korea, have the hull form of catamaran, with LOA(Length Over All) 15 m, LBP(Length Between Perpendiculars) 12 m, GT(Gross Tonnage) 9.77ton, Light Load Displacement 15.1ton. Korean Society of Ship Inspection & Technology, Chungnam National University, Inha University, Seoul National University and Advance Marine Tech co. ltd developed by cooperation it for fishing vessels. And it used FRP(Fiber Reinforced Plastics) for hull material and main engine of diesel $360ps{\times}2800rpm{\times}2sets$ with a water jet system. Based on these results, this paper describe small leisure fishing vessels with multi-hull, in relation to the project of CTYS(Regional Reserch Center for Transportation System of Yellow Sea Inha University) that aimed to development of trimaran hull form(LOA=17m, LBP=14m(Side Hull=6m), GT=9.77ton, Light Weight=11.2 ton).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.6
• /
• pp.1292-1305
• /
• 2013

Along with the strengthening vehicle environmental regulations and the growing needs for the energy consumption reduction technology, the researches on the engine idle stop system, have been briskly carried out around the automobile manufacturers before the development of alternative energy. Furthermore, there is a movement to disseminate the environment friendly idle stop system by combining the system to the generalized smart key system to not only increase purchasing but also provide the convenience and save the energy as well. In this paper, we designed and implemented the idle stop system algorithm for the aftermarket smart key system with the OBD-II interface. The implemented start stop system is capable of controlling two independent systems, the smart key system and intelligent idle stop system, on a single ECU. In addition, the implemented start stop system standardizes the communication interface with the vehicles to reduce the time required for installing the start stop system to the various vehicles, and satisfies every standard response time limit for the vehicle status request signals.