• Journal of Industrial Technology
• /
• v.25 no.B
• /
• pp.211-220
• /
• 2005

The wireless sensor network consists of a number of sensor nodes which have physical constraints. Each sensor node senses surrounding environments and sends the sensed information to Sink. The inherent vulnerability in security of the sensor nodes has promoted the needs for the lightweight security protocol. In this paper, we propose a non-hierarchical sensor network and a security protocol that is suitable for monitoring the man-made objects such as bridges. Furthermore, we present the efficient way of setting the routing path by storing IDs, MAC(message authentication code) and the location information of the nodes, and taking advantage of the two node states, Sleep and Awake. This also will result in the reduced energy consuming rate.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.2
• /
• pp.29-34
• /
• 2008

In this paper, we proposed a system protocol for detecting injurious insect to support energy saving transmission in wireless bio sensor networks. The main ideas and features of the system are as follows. First, the route establishment method which is based on the energy efficiency and stability by using time-division tree structure. Second, multi-hop direction-based data gatering structure. In this structure, the selected fading method is used to transmit packet via the established tree structure for supporting power saving and route lifetime efficiently. Finally, we can get the node power saving and reduce transmission delay, thus network lifetime and efficiency are improved. The performance evaluation of the proposed protocol is via OPNET(Optimized Network Engineering Tool).

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.11
• /
• pp.1135-1140
• /
• 2016

The main challenge in designing wearable WBANs is to guarantee the balance of QoS demands in the network with the low power constraints of limited battery powered nodes. Low power devices implanted in or attached to the body should be designed to meet minimum energy requirements due to their limited battery life and be small in size to be easily wearable. In this paper, we propose a method for optimizing channel allocation method that is compatible with the IEEE 802.15.6 standard, enables the maximum amount of power charge at idle, guarantees the QoS of a WBAN, and provides the reliable date transmission between nodes and hubs in the network. Our extensive simulations will show that the method we propose not only maximizes the QoS in packet transmission but also improves the level of energy efficiency.

• The Journal of the Korea Contents Association
• /
• v.10 no.9
• /
• pp.45-56
• /
• 2010

This paper reports a new mechanism for congestion controls. The proposed congestion detection algorithm can be provided with delay and unnecessary energy consumption. Conventional congestion control methods decide congestion by queue occupancy or mean packet arrival rate of MAC layer only, however, our method can perform precise detection by considering queue occupancy and mean packet arrival rate. In addition, the congestion avoiding method according to congestion degree and scheduling method using priority for real time packets are proposed. Finally, simulation results show that proposed congestion detection and control methods outperforms conventional scheduling schemes for wireless sensor network.

• Journal of Korea Multimedia Society
• /
• v.15 no.11
• /
• pp.1391-1398
• /
• 2012

Time synchronization is crucial in wireless sensor networks such as Wireless USB and WBAN for diverse purposes from the MAC to the application layer. This paper proposes online clock skew estimators to achieve energy-efficient time synchronization for wireless sensor networks. By using recursive least squares estimators, we not only reduce the amount of data which should be stored locally in a table at each sensor node, but also allow offset and skew compensations to be processed simultaneously. Our skew estimators can be easily integrated with traditional offset compensation schemes. The results of simulation and experiment show that the accuracy of time synchronization can be greatly improved through our skew compensation algorithm.

• Journal of Communications and Networks
• /
• v.10 no.2
• /
• pp.213-220
• /
• 2008

This paper analyzes a broadcasting technique for wireless multi-hop sensor networks that uses a form of cooperative diversity called opportunistic large arrays (OLAs). We propose a method for autonomous scheduling of the nodes, which limits the nodes that relay and saves as much as 32% of the transmit energy compared to other broadcast approaches, without requiring global positioning system (GPS), individual node addressing, or inter-node interaction. This energy-saving is a result of cross-layer interaction, in the sense that the medium access control (MAC) and routing functions are partially executed in the physical (PHY) layer. Our proposed method is called OLA with a transmission threshold (OLA-T), where a node compares its received power to a threshold to decide if it should forward. We also investigate OLA with variable threshold (OLA-VT), which optimizes the thresholds as a function of level. OLA-T and OLA-VT are compared with OLA broadcasting without a transmission threshold, each in their minimum energy configuration, using an analytical method under the orthogonal and continuum assumptions. The trade-off between the number of OLA levels (or hops) required to achieve successful network broadcast and transmission energy saved is investigated. The results based on the analytical assumptions are confirmed with Monte Carlo simulations.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.326-332
• /
• 2020

This paper presents the design of a routing metric for energy-efficient and low-delay path selection and a new routing protocol utilizing the metric in duty-cycyled wireless sensor networks. The new routing metric based on duty cycle, EDW, can reduce the energy and delay of transmission paths, which represents total waiting time from source to destination due to duty cycle. Therefore, in this paper, we propose a new multipath routing protocol based on cross-layer information utilizing the new routing metric, and simulation results show that the proposed protocol shows better performance of end-to-end delay and energy consumption.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.6
• /
• pp.1849-1876
• /
• 2022

Wireless Sensor Network (WSN) is considered as an integral part of the Internet of Things (IoT) for collecting real-time data from the site having many applications in industry 4.0 and smart cities. The task of nodes is to sense the environment and send the relevant information over the internet. Though this task seems very straightforward but it is vulnerable to certain issues like energy consumption, delay, throughput, etc. To efficiently address these issues, this work develops a cross-layer model for the optimization between MAC and the Network layer of the OSI model for WSN. A high value of duty cycle for nodes is selected to control the delay and further enhances data transmission reliability. A node measurement prediction system based on the Kalman filter has been introduced, which uses the constraint based on covariance value to decide the scheduling scheme of the nodes. The concept of duty cycle for node scheduling is employed with a greedy data forwarding scheme. The proposed Duty Cycle-based Greedy Routing (DCGR) scheme aims to minimize the hop count, thereby mitigating the energy consumption rate. The proposed algorithm is tested using a real-world wastewater treatment dataset. The proposed method marks an 87.5% increase in the energy efficiency and reduction in the network latency by 61% when validated with other similar pre-existing schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11B
• /
• pp.673-684
• /
• 2007

In this paper, we introduce an FARNS (Flooding algorithm with Adaptive Retransmission Nodes Selection). It is an efficient cross layer-based flooding technique to solve broadcast storm problem that is produced by simple flooding of nodes in wireless sensor network. FARNS can decrease waste of unnecessary energy by preventing retransmission action of whole network node by deciding retransmission candidate nodes that are selected by identification in MAC and distance with neighborhood node through received signal strength information in PHY. In simulation part, we show the results that FARNS has excellent performance than the other flooding schemes in terms of broadcast forwarding ratio, broadcast delivery ratio, number of redundancy packets and overhead. And FARNS can adjust of node ratio for retransmission operation, it can solve broadcast storm problem as well as meet the requirements of various network environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1B
• /
• pp.154-161
• /
• 2010

In wireless sensor networks, due to the many-to-one convergence of upstream traffic, congestion more probably appears. The existing congestion control protocols avoid congestion by controlling incoming traffic, but the duty-cycle operation of MAC(Medium Access Control) layer has not considered. In this paper, we propose DCA(Duty-cycle Based Congestion Avoidance), an energy efficient congestion control scheme using duty-cycle adjustment for wireless sensor networks. The DCA scheme uses both a resource control approach by increasing the packet reception rate of the receiving node and a traffic control approach by decreasing the packet transmission rate of the sending node for the congestion avoidance. Our results show that the DCA operates energy efficiently and achieves reliability by its congestion control scheme in duty-cycled wireless sensor networks.