• Journal of Radiation Protection and Research
• /
• v.20 no.1
• /
• pp.45-52
• /
• 1995

This study is to compare A point doses in human pelvic phantom by film dosimetry, computer planning and manual calculation by using of along-away table. We developed tissue equivalent human pelvic phantom composed of four pieces of cylindrical acryl tubes with water, to simulate intracavitary radiation (ICR) in patients with cervix cancer. When the phantom assembled from 4 pieces, it has a small space for inserting Fletcher-Suit-Delclos applicator like a human vagina. Fletcher-Suit-Delclos applicator inserted into the space was packed tightly with furacin gauzes, and three $^{137}Cs$ sources with radioactivity of $15.7mg\;Ra-eq$ were inserted into the tandem. For the film dosimetry, two pieces of X-OMAT V film (Kodak Co.) of which planes include point A, were arranged orthogonally in the slits between phantoms. A point dose and iso-dose curves were measured by means of optical densitometer. A point doses by film dosimetry, RTP system and manual calculation by using of along-away table were compared, and iso-dose curves by film dosimetry and computer planning were also compared. The dose of A point was 51.2cGy/hr by film dosimetry, 46.7cGy/hr by RTP system and 47.9 cGy/hr by along-away table. A point dose by computer planning was similar to the dose by calculation using of along-away table with acceptable accuracy $({\pm}3%)$, however, the dose by film dosimetry was different from two others with about 10% error. Since most clinical beams contains a scatter component of low energy photons, the correlation between optical density and dose becomes tenuous. In addition, film suffers from several potential errors such as changes in processing conditions, interfilm emulsion differences, and artifacts caused by air pockets adjacent to the film. For these reasons, absolute dosimetry with film is impractical, however, it is very useful for checking qualitative patterns of a radiation distribution. In future, solid state dosimeter such as TLD must be used for the dosimetry of ionizing radiation. When considerable care is used, precision of approximately 3% may be obtained using TLD.

• The Korean Journal of Air & Space Law and Policy
• /
• v.22 no.1
• /
• pp.29-54
• /
• 2007

Nuclear Power Sources(NPS) have been used since 1961 for the purpose of generating energy for space objects and have since then been recognized as particularly suited essential to some space operations. In January 1978 a malfuctioning Soviet nuclear powered satellite, Cosmos 954, re-entered the earth's atmosphere and disintegrated, scattering radioactive debris over a wide area of the Canadian Northwest Territory. This incident provided some reasons to international legal scholars to make some principles to regulate using NPS in outer space. In 1992 General Assembly adopted "Principles Relevant to the Use of Nuclear Power Sources in Outer Space". These NPS Principles set out certain legal and regulatory requirements on the use of nuclear and radioactive power sources for non-propulsive purposes. Although these principles, called 'soft laws', are not legal norms, they have much enfluences on state practices such as 1983 DBS Principles(Principles Governing the Use by States of Artificial Earth Satellites for International Direct Television Broadcasting), 1986 RS Principles(Principles Relating to Remote Sensing of the Earth from Space) and 1996 Declaration on International Cooperation in the Exploration and Use of Outer Space for the Benefit and in the Interests of all States, Taking into Particular Account the Needs of Developing Countries. As far as 1963 Declaration of Legal Principles Governing the Activities of States in the Exploration and Use of Outer Space is concerned the main points such as free use of outer space, non-appropriation of celestial bodies, application of international law to outer space etc. have become customary international law binding all states. NPS Principles might have similar characters according to states' willingness to respect them.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.2
• /
• pp.94-101
• /
• 1989

Transport properties of 2DEG at AlGaAs/GaAs interface such as average electron energy, flight distance, each valley occupancy ratio, average electron velocity for various fields are investigated by MONTE-CARLO method. As the electric field increases, more electrons transit drastically from (000) valley to (000) upper valley. This phenomenon shows the nonstationary effect such as velocity overshoot. The duration of the transient decreases from about 1.4 psec for electric field E = 7KV/cm to about 0.7 psec for 12KV/cm. The average electron velocity during transient transport in 2DEG is about 8 times the steady-state velocity for E = 12KV/cm at room temperature. In comparison with bulk GaAs the peak velocity in the 2DEG is higher than that in even pure bulk GaAs at electric field E = 7 KV/cm. On the basis of the fact that the electrons in the 2DEG have larger peak velocity and shorter transient time of velocity than those in the bulk GaAs, it is suggested that the device with 2DEG may obtain higher mobility than that with bulk GaAs.

• The Korean Journal of Air & Space Law and Policy
• /
• no.spc
• /
• pp.35-58
• /
• 2007

Nuclear Power Sources(NPS) have been used since 1961 for the purpose of generating energy for space objects and have since then been recognized as particularly suited essential to some space operations. In January 1978 a malfuctioning Soviet nuclear powered satellite, Cosmos 954, re-entered the earth's atmosphere and disintegrated, scattering radioactive debris over a wide area of the Canadian Northwest Territory. This incident provided some reasons to international legal scholars to make some principles to regulate using NPS in outer space. In 1992 General Assembly adopted "Principles Relevant to the Use of Nuclear Power Sources in Outer Space". These NPS Principles set out certain legal and regulatory requirements on the use of nuclear and radioactive power sources for non-propulsive purposes. Although these principles, called 'soft laws', are not legal norms, they have much enfluences on state practices such as 1983 DBS Principles(Principles Governing the Use by States of Artificial Earth Satellites for International Direct Television Broadcasting), 1986 RS Principles(Principles Relating to Remote Sensing of the Earth from Space) and 1996 Declaration on International Cooperation in the Exploration and Use of Outer Space for the Benefit and in the Interests of all States, Taking into Particular Account the Needs of Developing Countries. As far as 1963 Declaration of Legal Principles Governing the Activities of States in the Exploration and Use of Outer Space is concerned the main points such as free use of outer space, non-appropriation of celestial bodies, application of international law to outer space etc. have become customary international law binding all states. NPS Principles might have similar characters according to states' willingness to respect them.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.5
• /
• pp.403-414
• /
• 2005

The purpose of this study was to identify the effectiveness of the modified distraction osteogenesis (DO) method with the concept of overdistraction and compression stimulation which have been previously suggested by the authors in 2002 and to explore the optimal distraction-compression ratio and appropriate latency period for the compression force application during consolidation. The experimental specimens were assessed with radiography, histologic findings, and dual energy x-ray absorptiometry (DEXA) after the conventional DO method and the modified DO technique had been applied on rat mandibles. Total 60 rats were used for the study. In experimental group of 54 adult rats, mandibular osteotomies between the first and second molar areas were performed and customized external distractors were applied. The surgeries on 6 rats of control group also were done with same osteotomy technique and DO device application. Final amount of distraction was set-up as 2 mm on both groups. But, in a experimental group of 54 rats, distraction osteogenesis with a compression force were performed with the different distraction-compression ratio and variant latency periods for compression. The three ratio-subgroups were made as distraction 4 mm group with compression 2 mm, distraction 3 mm group with compression 1 mm, and distraction 2.5 mm group with compression 0.5 mm. In addition, The three subgroups with 3, 7, 11 days latency period prior compression were allocated on each ratio-subgroups. Total 9 subgroups consisted of 6 rats on each subgroup. In control group of 6 rats, conventional distraction technique were routinely performed. The rats of control groups were sacrificed on postoperative 3, 6 weeks after 2 mm distraction. The rats in the experimental groups also were sacrificed on the same euthanasia days of control groups to compare the wound healing. Final available specimens were 55 rats except 5 due to osteomyelitis, device dislodgement. Distraction-compression combined group on 6 weeks generally had showed increased bone mineral density than the same period group of conventional distraction technique on the DEXA study. More matured lamellar bone state and extended trabecular pattern in the combined group than those of control group were also observed in the histologic findings on 6 weeks. In the distraction-compression combined groups, the bone density of 2.5 mm distraction subgroups with 0.5 mm compression showed the highest value on the DEXA study among various force ratio groups. In the distraction-compression combined groups, the bone density of 3 day latency period subgroups showed the highest value on the DEXA study among various latency period groups for the compression application. From this study, we could deduce that 1/5 force ratio for the compression versus distraction, 3 day latency period prior compression application would be the most effective condition if modified distraction osteogenesis technique might be applicable. The modified DO method with a compression force may improve the quality of bone regenerate and shorten total treatment period in comparison with conventional DO technique clinically.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.04a
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• Economic and Environmental Geology
• /
• v.42 no.4
• /
• pp.289-300
• /
• 2009

The Geodo mine area, had been developed for Fe and Cu ores since 1963 and abandoned in recent decades, is located in the central part of the Taebaeksan mineralized district. This area comprises of the Jangsan, Myobong, Pungchon, Hwajeol, Dongjeom, and Dumugol Formations in ascending stratigraphic order. These Formations were intruded by the Cretaceous Eopyeong granitoids that appears to produce the Geodo skarn. Their compositions are relatively oxidized quartz monzodiorite to granodiorite (magnetite series, $Fe_2O_3/FeO=0.3{\sim}1.1$). Mineralizations related skarn deposit occur in the Myobong, Pungchon, and Hwajeol Formations. The proximal skarn is zoned from andraditic garnet ($Ad_{44-95}Gr_{1-53}$) predominant adjacent to the Eopyeong granitoids to diopsidic pyroxene ($Hd_{10-100}Di_{0-89}$) predominant away from the one. The differential proportion of garnet and pyroxene is generated by water/rock ratio and their source, such as magmatic and meteoric water. This is useful tool for assessment the overall oxidation state of the entire skarn system. Gold occurs in proximal red to brownish garnet skarn, and genetically associated with Bi- and Te-bearing minerals. Skarn deposit developed in the Geodo mine area is considered as oxidized Au skarn category, based on chemical composition of the Eopyeong granitoids, zonation of skarn, and gold occurrences. Garnet-rich skarn zone will be the main target for exploration of gold in the study area. However, it is needed to the detailed survey on vertical zonation of this area as well as lateral zonation. The result of this survey would provide an important basis for the exploration of the skarn Au deposit in the Geodo mine area.

• Journal of Korean Medical classics
• /
• v.13 no.1
• /
• pp.269-303
• /
• 2000

The xin(心) has various meanings in ${\ll}$Huangdineijing(黃帝內經)${\gg}$ but they sometimes contradict each other. This thesis divided the xin into the meaning and the Zang-xiang(藏象), and then analyzed the xin's notion in detail. The concept of the xin in ${\ll}$Huangdineijing(黃帝內經)${\gg}$ is sorted out into : the notion of space, yin-yang five elements(陰陽五行) and shen(神) The xin is the upper part of body and it possesses the character of yang(陽). So the concept of the breast has originated from this character and it rightly belonged to the top. The xin is assigned to fire among five elements, 'chang(長)', which has the energy of moving forward, noon at a day when yang-qi(陽氣) is properous and shows 'gu(鉤)' & 'keo(矩)' in pulse condition. The xin possesses the character, 'Taiyang of the yang(陽中之太陽)' along with the notion of space combined with five elements. That is, the notion of upper space means 'of the yang(陽中)', and, fire in five elements means 'yang'. This is similar to '=(Taiyang)' of Sasang(四象) at ${\ll}$the Book of Changes(周易)${\gg}$ Since the xin puts shen(神) in order, actions of spirit have effect on the xin. And it depends whether the sense of vitality is broad or narrow. The xin related with broad sense of spirit is 'monarch of the organs(君主之官)'. Therefore it has control over the human body. As it also directly effects the life or death, Pericardium(心句) substitutes the xin and protects the external invasion. In Shi-er-won(十二原) and Bonsu(本輸), instead of the Xin Channel the Pericardium Channel was used in healing patients. The xin can be interpretable as the mind, because the xin includes spirit. The mind can be distinguished into 'desire' and 'state of profound reason'. In ${\ll}$Huangdineijing(黃帝內徑)${\gg}$, the disease of the xin caused by emotion was mentioned many times. This emotion is 'desire' which resorted to the sentiment. The reason one mind has both character is; man preserves given principle (reason) and emotion reveals via the reason exercised. The above is about the xin related with the broad sense of vitality. Concerning the narrow sense of vitality, one of the five vitalities is stored with the others away in the five solid organs. Then it takes part in the operation of five body constituents and it is linked with the personified description of five solid organs. The xin, spleen, stomach and kidney are 'the ground of life'. Spleen and stomach are the origin of making qi and blood, which 'means the ground after birth'. Kidney keeps the essence of life, and manages the growing and generative function of human body. The xin keeps 'Shin-myung(神明)', in other words, it has control over and supervise whole activity of body. Therefore xin's role is needed for the appropriate working of spleen, stomach and kidney. And 'Shin-myung' is its motive power. In ${\ll}$Huangdineijing(黃帝內經)${\gg}$, the reason why xin was assigned to September and October is that yang-qi of the human body goes to the inner part, with xin at the same time. This explains that yang-qi of the human body is adapted to change of season and goes into xin-fire(心火) in order to get away from the cold. In this case, heart means more inner part than liver, spleen and lung. Mengzi(孟子), philosopher of the China's turbulent ages emphasized the thinking function of xin. Sunzi(荀子) asserted that xin is 'heaven monarch(天君)' and the other organs are 'heaven rninisters(天官)'. This conception is similar to 'monarch of the organs' of ${\ll}$Huangdineijing(黃帝內經)${\gg}$. After the Ming Dynasty, commentators of Huangdineijing(黃帝內經) explained the heart, as 'monarch of the organs', or 'the master of body(一身之主)'. This was due to the influence of Sung Confucianism.

• Korean Journal of Agricultural Science
• /
• v.12 no.1
• /
• pp.75-85
• /
• 1985

This study is intended to find out the influence of Lignosulfonic Acid Type Admixture on compressive, tensile, flexural strength and dispersing action of mortar, and fixation of by-product of pulp industry. 1. The more Pozzolith-84 is added, the larger flow value is. The admixture of lignosulfonic acid type adhere to cement particles and the surface potential of particles is generated. On account of the repulsion among the cement particles, they are dispersed and the mortar get workable, so the production cost of precast product is curtailed and the amount of cement is reduced in a certain workability of mortar. 2. The strength of mortar is greater than plain mortar when P/C added is 0.2 and 0.4%. As time passed the potential energy is reduced and the distance of particles which lignosulfonic acid adhered to get near according as the amount of adhesion is increased. The setting and hardening reaction of morter is occurred in close state, so the strength of mortar is increased a little. The strength of mortar is less than plain mortar when amount P/C added is 0.8%. Pozzolith-84 is mainly composed of lignosulfonic acid and lignin does not influence the hardening of mortar, therefore the remained $SO_3$, $SO_3H$ are the reason of decrease of strength. 3. There is high significance between specific gravity and compressive strength. The larger specific gravity is, the more compressive strength is increased. There is high significance between 7 day's strength and 28 day's strength. The larger compressive strength is, the more tensile and flexural strength are increased. 4. Since Pozzolith-84 is a by-product of pulp industry, by using the Pozzolith-84 admixture the concreate quality is improved. The water pollusion is reduced according to fix by-products in concrete structure.

• Hwankyungkyoyuk
• /
• v.6 no.1
• /
• pp.63-99
• /
• 1994

The international environmental activities and environmental education began in 1970's. Environmental education in Korea was emphasized since the Forth National Curriculum. 'The Environmental Education Curriculum' will be separated as one of the most important parts in the Sixth National Education Curriculum in Korea. The purpose of this study was development. of 'Environmental Science' of high school appropriate to Sixth National Education Curriculum. First step was to state goals of environmental education in detail based on analysis of goals about environmental education in our country and other countries. Second was to analyse seven environments-related texts of Korea, America and England. Third, to measure how much environmental education has achieved in Fifth National Curriculum of Korea. Fourth, to develop a new environmental text of high school level. Fifth, to verify the effect of developed environmental text. The environmental part of 'Science I'(unit V. Life and Environments) and high school environments-related reference text(Survival and Environments) in Korea, American knowledges. American 'Environments' was stressed in many skills but they didn't include various teaching strategies. On the other hand, American 'Science-Technology-Society(S-T-S)' and British 'Science and Technology in Society(SATIS)' were stressed in knowledges and skills, and they included many teaching strategies and student actions. American 'S-T-S' was the only one stressed in values and attitudes. And all seven texts were not interested in behaviors and participations. To measure the achievement of environmental education by questionnaire, 497 high school students in total were selected from five different schools. Actually, most students had a positive thinkings and attitudes in their hearts about environmental problems, about environmental problems, but many of them did not take actions to solve environmental problems and to protect environments. The higher the score students got in 'knowledges and informations', the higher the score in 'skill'. It implies that learning of skills is based on learning of knowledges and informations about environments. On the other hand, much knowledges and information about environments has not always ensured positive thinkings and attitudes or active behaviors and participations to solve environmental problem. In view that ultimate aim of environmental education is forming responsible environmental behaviors and the goals of values and behaviors are as important as knowledges and skills. A new environmental text of high school level was developed and it was based on analysis of seven texts and environmental education in Fifth Korean Curriculum. This text have seven units, 1. Habitates : What're the meanings?, 2. Nuclear Energy : Can't be Avoid?, 3. Acid Rain : What're the Messages?, 4. Ethanol : Is this Future Fuel?, 5. Wastes : A New War!, 6. What're the National and Gloval Environmental education and avoided from the array of knowledges. Therefore included various teaching strategies and independent actions of students. 'Open-ended value learning' and 'free behavior learning' in text were special learning parts for aquisition of values and formation of behaviors. To verify the effects. of new developed environmental text, the direct learning was carried out by 286 students in total. Post test scores of experimental groups per each units were significantly higher than those of control groups from five different schools were as follows. For validity of selecting contents for units, 74% of respondent replied positively. For classification and presentation of four goal-groups, 90% replied positively in validity and 82%, in utility. For validity of various teaching strategies, 88% and for the degree of including student-centered independent actions, 86% replied positively, For importances and expected effects of 'open=ended value learning' and 'free behavior learning', showed positive responses respectively, 88%, 92% Therefore this text is effective to achieve four goals of environmental education equally.