• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.284-284
• /
• 2016

Topological insulator (TI) is a bulk-insulating material with topologically protected Dirac surface states in the band gap. In particular, $Bi_2Se_3$ attracted great attention as a model three-dimensional TI due to its simple electronic structure of the surface states in a relatively large band gap (~0.3 eV). However, experimental efforts using $Bi_2Se_3$ have been difficult due to the abundance of structural defects, which frequently results in the bulk conduction being dominant over the surface conduction in transport due to the bulk doping effects of the defect sites. One promising approach in avoiding this problem is to reduce the structural defects by heteroepitaxially grow $Bi_2Se_3$ on a substrate with a compatible lattice structure, while also preventing surface degradation by encapsulating the pristine interface between $Bi_2Se_3$ and the substrate in a clean growth environment. A particularly promising choice of substrate for the heteroepitaxial growth is hexagonal boron nitride (h-BN), which has the same two-dimensional (2D) van der Waals (vdW) layered structure and hexagonal lattice symmetry as $Bi_2Se_3$. Moreover, since h-BN is a dielectric insulator with a large bandgap energy of 5.97 eV and chemically inert surfaces, it is well suited as a substrate for high mobility electronic transport studies of vdW material systems. Here we report the heteroepitaxial growth and characterization of high quality topological insulator $Bi_2Se_3$ thin films prepared on h-BN layers. Especially, we used molecular beam epitaxy to achieve high quality TI thin films with extremely low defect concentrations and an ideal interface between the films and substrates. To optimize the morphology and microstructural quality of the films, a two-step growth was performed on h-BN layers transferred on transmission electron microscopy (TEM) compatible substrates. The resulting $Bi_2Se_3$ thin films were highly crystalline with atomically smooth terraces over a large area, and the $Bi_2Se_3$ and h-BN exhibited a clear heteroepitaxial relationship with an atomically abrupt and clean interface, as examined by high-resolution TEM. Magnetotransport characterizations revealed that this interface supports a high quality topological surface state devoid of bulk contribution, as evidenced by Hall, Shubnikov-de Haas, and weak anti-localization measurements. We believe that the experimental scheme demonstrated in this talk can serve as a promising method for the preparation of high quality TI thin films as well as many other heterostructures based on 2D vdW layered materials.

• The Korean Journal of Air & Space Law and Policy
• /
• v.20 no.1
• /
• pp.87-107
• /
• 2005

Land Remote Sensing' is defined as the science (and to some extent, art) of acquiring information about the Earth's surface without actually being in contact with it. Narrowly speaking, this is done by sensing and recording reflected or emitted energy and processing, analyzing, and applying that information. Remote sensing technology was initially developed with certain purposes in mind ie. military and environmental observation. However, after 1970s, as these high-technologies were taught to private industries, remote sensing began to be more commercialized. Recently, we are witnessing a 0.61-meter high-resolution satellite image on a free market. While privatization of land remote sensing has enabled one to use this information for disaster prevention, map creation, resource exploration and more, it can also create serious threat to a sensed nation's national security, if such high resolution images fall into a hostile group ie. terrorists. The United States, a leading nation for land remote sensing technology, has been preparing and developing legislative control measures against the remote sensing industry, and has successfully created various policies to do so. Through the National Oceanic and Atmospheric Administration's authority under the Land Remote Sensing Policy Act, the US can restrict sensing and recording of resolution of 0.5 meter or better, and prohibit distributing/circulating any images for the first 24 hours. In 1994, Presidential Decision Directive 23 ordered a 'Shutter Control' policy that details heightened level of restriction from sensing to commercializing such sensitive data. The Directive 23 was even more strengthened in 2003 when the Congress passed US Commercial Remote Sensing Policy. These policies allow Secretary of Defense and Secretary of State to set up guidelines in authorizing land remote sensing, and to limit sensing and distributing satellite images in the name of the national security - US government can use the civilian remote sensing systems when needed for the national security purpose. The fact that the world's leading aerospace technology country acknowledged the magnitude of land remote sensing in the context of national security, and it has made and is making much effort to create necessary legislative measures to control the powerful technology gives much suggestions to our divided Korean peninsula. We, too, must continue working on the Korea National Space Development Act and laws to develop the necessary policies to ensure not only the development of space industry, but also to ensure the national security.

• Horticultural Science & Technology
• /
• v.34 no.2
• /
• pp.207-219
• /
• 2016

Incandescent (INC) lamps have been commonly used to promote flowering of long-day (LD) plants during short-day (SD) seasons, but production of INC lamps has been prohibited due to their low energy efficiency. One of the light sources replacing INC lamps is a compact fluorescent lamp (CFL). This study was carried out to compare the flowering and morphological responses of LD annuals grown in a controlled environment greenhouse at $20^{\circ}C$ with a truncated 9-h SD and a 2- or 4-h night interruption (NI) or 6-h day extension (DE) provided by lighting from INC lamps, CFLs, or a combination of the two (INC + CFLs), in which red (R) to far-red (FR) ratios were 0.60, 8.46, and 0.91, respectively, and their PPFDs were $2.3{\pm}0.3{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. After 12 weeks of treatment, $Petunia{\times}hybrida$ 'Wave Purple' plants did not flower under the SD photoperiod whereas 100% flowered under all of the LD treatments. Flowering was more rapid under the INC or INC + CFL lighting treatments compared to CFL and DE, and 4-h NI enhanced flowering compared to 2-h NI. In addition, plants under DE and 4h-NI generally flowered earlier than under 2-h NI. All petunia 'Single Dreams Red' plants flowered within 65 days after treatment, and flowering was hastened by some LD lighting regimens and lamp types. Plants under DE and 4h-NI generally flowered earlier than under 2-h NI INC or INC + CFL compared to FL, and flowering time under INC 6-h DE was earliest. In addition, INC lighting promoted stem elongation of both petunia cultivars. In both pansy (Viola${\times}wittrockiana$) 'Coiossus Yellow' and 'Delta Blue Blotch', LD treatments, especially using INC lamps, promoted flowering whereas the lighting period had little influence on days to flowering. Therefore, INC or INC + CFL with lower R:FR promoted flowering and stem extension and the promoting effect was larger with longer lighting periods. These results suggest that CFLs can be used to provide LDs to promote the flowering of petunia and pansy and to reduce stem elongation, although the promoting effect on flowering is sometimes less than that of INC lamps alone.

• Journal of the Korean Society of Food Culture
• /
• v.6 no.2
• /
• pp.185-197
• /
• 1991

An eating behavior research was done with 50 females at a buffet styled restaurant during their lunch time. Of the respondents, 52.0% were professional and 54.0% were graduate school graduates. Of the respondents, 58.0% of the company were friends and 24.0% were relatives. The average time period of eating was $93.0{\pm}23.4$ minutes. The average frequency of taking food was $4.0{\pm}1.1$ and the average frequency of taking food after satiety was $1.4{\pm}0.8$. It is significant that lower frequency of food consumption was directly proportional to the age groups of respondents. The average selected food items were $30.4{\pm}7.1$ out of 175 and the average weight of the consumed food was $995.0{\pm}240.9$ g. The older age group chose a similar number of food items, but the amount of each food item was considerably less than younger. So the younger the age group was, the more they ate. The average food items at one time was $7.1{\pm}2.2$ and the average food weight time was $233.7{\pm}69.7$ g. The percentage of respondents who evaluated themselves as 'ate too much' was 70.0% and those who evaluate themselves 'ate properly' was 14.0%. Most of them were satisfied with the buffet service. The average of number of food items consumed by respondents before cooking was $50.5{\pm}8.9$. The consumption of calories and nutrients was compared with the Korean Daily Recommended Dietary Allowances. The consumed calories were 60.9% of RDAs, protein 104.4%, calcium 77.1%, iron 129.8%, vitamin A 66.5%, thiamin 96.0%, riboflavin 95.7%, niacin126.6% and ascorbic acid 112.3%. This data exceeded 1/3 of the Korean Daily RDAs tremendously and tells us extreme overeating. The energy ratio of carbohydrate: fat: protein was 51.6: 29.9: 18.5. Caloric consumption of animal food was 27.9% and the consumption rate of the other nutrients from animal food was considerably high. But the consumption rate of vitamin A was 90.9% from vegetable groups. Accoding to this study, buffet service gives some advantages. It gives customers an good opportunity to vary their food intake, which enhances eating experiences and can cause an improvemont of food habits. But overeating is a problem. Therefore, we think it is necessary for those women who have influence over their family's food selection, to have nutrition education about a desirable order of eating a meal, food selection, and health problems due to overeating at buffet styled restaurant. There should be some improvement in the management of buffet service. For example, proper temperature, texture, and freshness of the food should be maintained. Prevention of mixed food smells should be considered as well. To lower the price it is desirable to reduce the number of similar items and to use seasonal food as much as possible. A buffet styled restaurant with less food items with cheaper prices is recommended. Various traditional food should be developed for the menu items. We expect buffet services to be sutable to maintain good health and to be popular to any eater.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.1
• /
• pp.50-56
• /
• 2012

Purpose: Those who access to the nuclear medicine department are classified as radiation workers, temporarily access group, and occasional access group as defined by the atomic energy law. The radiation workers and temporarily access people wear a personal radiation dosimeter for checking their own radiation absorbed dose periodically. However, because of the sanitation workers, classified as temporarily access group, who are working in the nuclear medicine department are moved in a cycle with other departments and their works are changeful, it is hard to control their radiation absorbed dose. Thus, this study is going to examine the state of the sanitation worker's radiation absorbed dose, and then make sure whether they are classified as temporarily access group or not. Materials and methods: In the first instance, the first sanitation worker who works in vitro laboratory and PET room and the second sanitation worker who works in gamma camera rooms (invivo room) wore radiation dosimeter-OSL(Optically Stimulated Luminescence)- to measure their own radiation absorbed dose during work time from May to June 2011. Secondly, this study was taken place 5 places in gamma camera rooms, 2 places in PET bed room, operating room, waiting room and cyclotron room in PET and 4 places in vitro laboratory. And then to measure the radiation space dose rate, it is measured 10 times each of places as sanitation worker's work flow by using radiation survey meter. Results: The radiation absorbed dose on OSL of the first c who works in vitro laboratory and PET room and the second one who works in gamma camera rooms are 0.04, 0.02 mSv per month respectively. That means the estimated annual radiation absorbed doses are less than 1mSv as 0.48, 0.24 mSv/yr respectively. The radiation space dose rates as sanitation worker's work flow using survey meter are 0.0037, 0.0019 mSv/day, so the estimated annual radiation absorbed dose are 0.93, 0.47 mSv/yr respectively. The weighted exposure dose of first sanitation worker of each places are 1.62% in cyclotron room, 3.88% in waiting room, 2.39% in operating room, 81.01% in bed room of PET and 11.01% in vitro laboratory. The weighted exposure dose of second sanitation worker of each places are 45.22% in radiopharmaceutical laboratory, gamma 30.64% in camera rooms, 15.65% in waiting room, 8.49% in reading room. Conclusion: The annual radiation absorbed doses on OSL of both sanitation workers are less than 1 mSv per year and the annual radiation absorbed doses by using survey meter are less than 1mSv either, but close up to 1 mSv. Thus, to clarify whether the sanitation workers are temporarily access group or not, and to be lessen their s radiation absorbed dose, they should be educated about management of radiation and modified their work flow or work time appropriately, their radiation absorbed dose would be lessen certainly.

• Journal of the Korean earth science society
• /
• v.40 no.6
• /
• pp.572-583
• /
• 2019

In this study, the atmospheric vertical structure (AVS) associated with summertime (June, July, and August) heavy rainfall in Seoul was classified into three patterns (Loaded Gun: L, Inverted V: IV, and Thin Tube: TT) using rawinsonde soundings launched at Osan from 2009 to 2018. The characteristics of classified AVS and precipitation property were analyzed. Occurrence frequencies in each type were 34.7% (TT-type), 20.4% (IV-type), 20.4% (LG-type), and 24.5% (Other-type), respectively. The mean value of Convective Available Potential Energy (1131.1 J kg^-1) for LG-types and Storm Relative Helicity (357.6 ㎡s^-2) for TT-types was about 2 times higher than that of other types, which seems to be the difference in the mechanism of convection at the low level atmosphere. The composited synoptic fields in all cases showed a pattern that warm and humid southwesterly wind flows into the Korean Peninsula. In the cases of TT-type, the low pressure center (at 850 hPa) was followed by the trough in upper-level (at 500 hPa) as the typical pattern of a low pressure deepening. The TT-type was strongly influenced by the low level jet (at 850 hPa), showing a pattern of connecting the upper- and low-level jets. The result of analysis indicated that precipitation was intensified in the first half of all types. IV-type precipitation induced by thermal instability tended to last for a short term period with strong precipitation intensity, while TT-type by mechanical instability showed weak precipitation over a long term period.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.1
• /
• pp.103-113
• /
• 2020

Jack-up drilling rigs are widely used in the offshore oil and gas exploration industry. Although originally designed for use in shallow waters, trends in the energy industry have led to a growing demand for their use in deep sea and harsh environmental conditions. To extend the operating range of jack-up units, their design must be based on reliable analysis while eliminating excessive conservatism. In current industrial practice, jack-up drilling rigs are designed using the working(or allowable) stress design (WSD) method. Recently, classifications have been developed for specific regulations based on the load and resistance factor design (LRFD) method, which emphasises the reliability of the methods. This statistical method utilises the concept of limit state design and uses factored loads and resistance factors to account for uncertainly in the loads and computed strength of the leg components in a jack-up drilling rig. The key differences between the LRFD method and the WSD method must be identified to enable appropriate use of the LRFD method for designing jack-up rigs. Therefore, the aim of this study is to compare and quantitatively investigate the differences between actual jack-up lattice leg structures, which are designed by the WSD and LRFD methods, and subject to different environmental load-to-dead-load ratios, thereby delineating the load-to-capacity ratios of rigs designed using theses methods under these different enviromental conditions. The comparative results are significantly advantageous in the leg design of jack-up rigs, and determine that the jack-up rigs designed using the WSD and LRFD methods with UC values differ by approximately 31 % with respect to the API-RP code basis. It can be observed that the LRFD design method is more advantageous to structure optimization compared to the WSD method.

• Journal of the Korean Geographical Society
• /
• v.48 no.1
• /
• pp.87-111
• /
• 2013

Regional disparities between eastern and western regions is the most of serious problem for balanced regional development in Turkey. The Southeastern Anatolia Project (GAP) is being implemented to eliminate these regional development disparities. The work that was initially planned as predominantly for hydraulic energy production to utilize water resources of the Tigris and Euphrates rivers more effectively was later transformed into an integrated multi-sector regional development project. This study noted that this region had very limited cash crop production because of the constraints of semi-arid climate of the southeastern region, however, later, it has changed Turkey's major cotton producing region since Southeastern Anatolia Project carried out. Therefore, this study investigated background, process, and content of the Southeastern Anatolia Project with respect to high cotton productivity in this region and examined the dynamic changes of cotton productivity in this region. In addition, Sanliurfa prefecture is one of the main development axes of the Southeastern Anatolia Project, because government investments are concentrated on this prefecture. Therefore, this study examined the background and process of cotton farming growth in this prefecture. In 2011, Sanliurfa prefecture produced 37.6% of Turkey's total cotton production. This is mainly due to agricultural infrastructure expansion such as land consolidation, irrigation, roads and farm roads. Also, it is one of the main factor that subsidies paid to farmers for cotton cultivation. The introduction of irrigation has dramatically changed the direction of seasonal migration of this area. Prior to irrigation, this area had a serious social issue about out-migration for seasonal labor to other areas. However, the introduction of irrigation made this area that changed to in-migration and intramigration for cotton cultivation. Irrigation water is supplied to farmers through the WUAs (Water User Associations) that handed over irrigation water management, operation from DSI (General Directorate of State of Hydraulic Works). However, the WUAs are under the influence of Ashiret, a traditional feudal social structure. Because of this reason, it does not have an efficient management for farmers. Also, it is one of the reasons that this area does not have autonomous farmer organization.

• Journal of Radiation Protection and Research
• /
• v.20 no.1
• /
• pp.45-52
• /
• 1995

This study is to compare A point doses in human pelvic phantom by film dosimetry, computer planning and manual calculation by using of along-away table. We developed tissue equivalent human pelvic phantom composed of four pieces of cylindrical acryl tubes with water, to simulate intracavitary radiation (ICR) in patients with cervix cancer. When the phantom assembled from 4 pieces, it has a small space for inserting Fletcher-Suit-Delclos applicator like a human vagina. Fletcher-Suit-Delclos applicator inserted into the space was packed tightly with furacin gauzes, and three $^{137}Cs$ sources with radioactivity of $15.7mg\;Ra-eq$ were inserted into the tandem. For the film dosimetry, two pieces of X-OMAT V film (Kodak Co.) of which planes include point A, were arranged orthogonally in the slits between phantoms. A point dose and iso-dose curves were measured by means of optical densitometer. A point doses by film dosimetry, RTP system and manual calculation by using of along-away table were compared, and iso-dose curves by film dosimetry and computer planning were also compared. The dose of A point was 51.2cGy/hr by film dosimetry, 46.7cGy/hr by RTP system and 47.9 cGy/hr by along-away table. A point dose by computer planning was similar to the dose by calculation using of along-away table with acceptable accuracy $({\pm}3%)$, however, the dose by film dosimetry was different from two others with about 10% error. Since most clinical beams contains a scatter component of low energy photons, the correlation between optical density and dose becomes tenuous. In addition, film suffers from several potential errors such as changes in processing conditions, interfilm emulsion differences, and artifacts caused by air pockets adjacent to the film. For these reasons, absolute dosimetry with film is impractical, however, it is very useful for checking qualitative patterns of a radiation distribution. In future, solid state dosimeter such as TLD must be used for the dosimetry of ionizing radiation. When considerable care is used, precision of approximately 3% may be obtained using TLD.

• The Korean Journal of Air & Space Law and Policy
• /
• v.22 no.1
• /
• pp.29-54
• /
• 2007

Nuclear Power Sources(NPS) have been used since 1961 for the purpose of generating energy for space objects and have since then been recognized as particularly suited essential to some space operations. In January 1978 a malfuctioning Soviet nuclear powered satellite, Cosmos 954, re-entered the earth's atmosphere and disintegrated, scattering radioactive debris over a wide area of the Canadian Northwest Territory. This incident provided some reasons to international legal scholars to make some principles to regulate using NPS in outer space. In 1992 General Assembly adopted "Principles Relevant to the Use of Nuclear Power Sources in Outer Space". These NPS Principles set out certain legal and regulatory requirements on the use of nuclear and radioactive power sources for non-propulsive purposes. Although these principles, called 'soft laws', are not legal norms, they have much enfluences on state practices such as 1983 DBS Principles(Principles Governing the Use by States of Artificial Earth Satellites for International Direct Television Broadcasting), 1986 RS Principles(Principles Relating to Remote Sensing of the Earth from Space) and 1996 Declaration on International Cooperation in the Exploration and Use of Outer Space for the Benefit and in the Interests of all States, Taking into Particular Account the Needs of Developing Countries. As far as 1963 Declaration of Legal Principles Governing the Activities of States in the Exploration and Use of Outer Space is concerned the main points such as free use of outer space, non-appropriation of celestial bodies, application of international law to outer space etc. have become customary international law binding all states. NPS Principles might have similar characters according to states' willingness to respect them.