• Journal of the Korean Electrochemical Society
• /
• v.15 no.3
• /
• pp.190-197
• /
• 2012

We employed the vinyl ethylene carbonate (VEC) as an electrolyte additive and investigated the effect of the electrolyte additive on the electrochemical performance in hybrid capacitor. The activated carbon was adopted as cathode material, and the $Li_4Ti_5O_{12}$ oxide was used as anode material. The electrolyte was prepared with the $LiPF_6$ salt in the mixed solvent of ethylene carbonate (EC), dimethyl carbonate (DMC), and ethyl methyl carbonate(EMC). We evaluated the electrochemical performance of the hybrid capacitor with increasing the amount of the VEC electrolyte additive, which is known as the remover of oxygen functional group and the stabilizer of the electrode by reducing the surface of electrode, and obtained the superior performance data especially at the addition of the VEC electrolyte additive of around 0.7 vol%. On the contrary, the addition of the VEC more than 0.7 vol% in the electrolyte leads to the degradation in electrochemical performance of hybrid capacitor, suggesting the increase of the side reaction from the excessive VEC additive. X-ray photoelectron spectroscopy (XPS) revealed that the addition of the VEC suppressed the formation of LiF component, which is known as the insulator, on the surface of electrode. The optimized addition of VEC exhibited the improved capacity retention around 82.7% whereas the bare capacitors without VEC additive showed the 43.2% of capacity retention after 2500 cycling test.

• Journal of Navigation and Port Research
• /
• v.28 no.3
• /
• pp.269-276
• /
• 2004

The reclaimed land has peculiar characteristic of nature environment unlike midtown or inland and also, in comparison with inland, has bad weather condition, such as low temperature, strong wind, excessive sunshine, and moisture involved in a salt. Therefore the case of developing water front needs understanding characteristic of weather environment mused by reclamation in detail and proper development and organized maintenance. If development which doesn't investigate topographic and climate characteristic sufficiently is drove ahead, a rise of expense for energy and maintenance is going to be mused by deteriorating weather environmental, occurring a flaw of facility and calculating inaccurate capacity of facility. We looked into the weather state and drew up the standard weather data of the newport area in Busan which is reclaiming and developing now. In this research at the base qf the standard weather data, we calculate the dynamic peak loads for commerce, business and residence and then we utilize the results of the load calculation as basic information to determine facility capacity in the rear city of the newport area.

• Journal of the Korean Electrochemical Society
• /
• v.5 no.3
• /
• pp.99-105
• /
• 2002

This study investigated characteristics of ICR18650 batteries with different electrolyte compositions in the range of $80^{\circ}C\~-30^{\circ}C$. ICR18650 cells using $1M\;LiPF_6,\;EC:\;DEC:\;DMC(3:5:5)\;and\; 1M\;LiPF_6,\;EC:\;DEC:\;DMC:\;EMC(3:5:4:1)$ electrolyte systems, which DMC and EMC solvent were added in $1M\;LiPF_6,\;EC:\;DEC$ electrolytes have high specific energy in the wide range of temperature. The specific energy of ICR18650 batteries using $1M\;LiPF_6,\;EC:\;DEC:\;DMC(3:5:5)\;and\; 1M\;LiPF_6,\;EC:\;DEC;\:\;DMC:\;EMC(3:5:4:1)$ electrolyte at $-30^{\circ}C\;was\;64\%\;and\;59\%$ of room temperature$(25^{\circ}C)$, respectively.

• Journal of Plant Biotechnology
• /
• v.45 no.3
• /
• pp.196-206
• /
• 2018

Dramatic increase in global population accompanied by rapid industrialization in developing countries has led to serious environmental, food, energy, and health problems. The Food and Agriculture Organization of the United Nations has estimated world population will increase to 9.7 billion by 2050 and require approximately 1.7 times more food, and more than 3.5 times energy than that of today. Particularly, sweetpotato is easy to cultivate in unfavorable conditions such as heat, drought, high salt, and marginal lands. In this respect, sweetpotato is an industrially valuable starch crop. To replace crops associated with these food and energy problems, it is necessary to develop new crops with improved nutrients and productivity, that can be grown on marginal lands, including desertification areas using plant biotechnology. For this purpose, exploring useful genes and developing genetically modified crops are essential strategies. Currently, sweetpotato [Ipomoea batatas (L.) Lam.] have been re-evaluated as the best health food and industrial crop that produces starch and low molecular weight antioxidants, such as vitamin A, vitamin E, anthocyanins and carotenoids. This review will focus on the current status of research on sweetpotato biotechnology on omics including genome sequencing, transcriptome, proteomics and molecular breeding. In addition, prospects on molecular breeding of sweetpotato on marginal lands for sustainable development were described.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.4
• /
• pp.515-523
• /
• 2012

The objective of this study was to investigate the variability in broiler performance, apparent metabolisable energy (AME) and ileal digestible energy (IDE) between five different maize samples fed with and without xylanase at 16,000 U/kg. Various in vitro characterisations were conducted to determine if any could predict performance or AME. Samples of the maize were harvested in five diverse regions and fed individually in a mash diet as follows (g/kg): test maize 608.3; soya bean meal (SBM) 324.1; poultry fat 25.2; salt 4.6; met 2.6; lys 1.6; thr 0.5; limestone 9.7, dical 18.4; vit/min 5.0; CP 210 and ME (kcal/kg) 3,085. The diets were fed to 720 broilers with 6 replicates, each containing 12 birds per treatment, from 0 to 18 d of age. Maize samples were analysed for starch, protein, crude fibre, fat, protein solubility index (PSI) and vitreousness using near infra red reflectance spectroscopy (NIR). They were also assayed using an in vitro starch digestibility method. The results showed that there was no effect of harvest region on the feed intake (FI), body weight gain (BWG) or feed conversion ratio (FCR) of the broilers over the 18 d period (p = 0.959, 0.926, 0.819 respectively). There was an improvement in all parameters with the addition of xylanase (FI p = 0.011; BWG and FCR p<0.001). There was a significant positive effect of xylanase on IDE, AME, IDE Intake (IDEI) and AME intake (AMEI) (p<0.0001 in all cases). Although there was no significant effect of maize source, there was a strong trend towards variability in IDE (p = 0.066) and AME (p = 0.058). There were no significant correlations (p<0.05) between any proximate or physiochemical values and any performance or AME values. This may suggest that none of those selected were suitable predictors for performance or AME. The broilers performed well according to the breed guidelines, with slightly increased FI, increased BWG and similar FCR prior to the addition of xylanase. When FCR and BWG were analysed with FI as a covariate, xylanase addition remained significant suggesting that the improvement in BWG and FCR was driven by an increase in digestibility and nutrient availability.

• Resources Recycling
• /
• v.24 no.6
• /
• pp.9-16
• /
• 2015

In a recycling scheme of spent lithium ion batteries, a co-precipitation process for the re-synthesis of precursor is essential after the leaching of lithium ion battery scraps. In this study, the effect of ammonia as impurity during the co-precipitation process was investigated in order to re-synthesize a precursor of Ni-rich cathode active material $LiNi_{0.6}Co_{0.2}Mn_{0.2}O_2$ (NCM 622). As ammonia concentration increases from 1 M (the optimum condition for synthesis of the precursors based on 2 M of metal salt solution) to 4 M, the composition of obtained precursors deviates from the designed composition, most notably for Ni. The Ni co-precipitation efficiency gradually decreases from 100% to 87% when the concentration of ammonia solution increases from 1 M to 4 M. Meanwhile, the morphological properties of the obtained precursors such as sphericity, homogeneity and size distribution of particles were also investigated.

• Clean Technology
• /
• v.20 no.2
• /
• pp.146-153
• /
• 2014

In this study, the effect of alkanolamine additives, 2-amino-2-methyl-1-propanol (AMP) and 2-amino-2-methyl-1,3-propanediol (AMPD) on $CO_2$ absorption rate of $K_2CO_3$ solution and the formation of $KHCO_3$ crystals was investigated. The normalized $CO_2$ flux and the equilibrium $CO_2$ partial pressure were measured for 5 wt% additives and 30 wt% $K_2CO_3$ mixtures using a wetted-wall column unit at $40^{\circ}C$ and $60^{\circ}C$. Both additives showed the increased $CO_2$ absorption rate and lowered the equilibrium $CO_2$ partial pressure acting as promoters. Besides, AMPD which has two hydroxyl groups enhanced the formation of $KHCO_3$ solid product separated from the $CO_2$-rich solution from the results of batch cooling crystallization experiments.

• Journal of Ocean Engineering and Technology
• /
• v.19 no.5 s.66
• /
• pp.43-49
• /
• 2005

This paper is to investigate the effect of corrosion by acoustic emission method in tensile loading and the adhesiveness between substrate and coating layer. The powders used are Zn and Amdry625, respectively. They are coated on brass alloy substrate. AE signals of Zn and Amdry625 coating layer increase drastically in strain $2\%$. However, those of Zn specimen have more than those of Amdry625 specimen. When the specimens executed the corrosion test under $3.5\%$ NaCl solution for 500, 1000 hours, the salt solution penetrated into the surface of the substrate through the pores of the coating layer. As a result, corrosion production formed on the surface of the substrate. The adhesiveness between coating layers is weakened by the polarization and corrosion itself. The AE event, count, and energy of corroded coating specimens decrease, compared to specimens without corrosion. The results are summarized as follows : 1. In the tensile tests, the time that it took to start and develop the cracks and exfoliations between the surface of the substrates and the plasma spray coatings were different according to the type of plasma sprayed material, which are Zn and Amdry625. These phenomena were obvious at the strain rate 1 to $5\%$, and few available data were found after that stage. 2. The specimens with Zn coating showed the characteristics of crack, according to the changes of the tensile strength applied on the substrates while those with Amdry625 showed exfoliation as a result of low adaptation to the tensile strength. 3. The anti-corrosion specimens showed that the adhesive properties between the substrate and the plasma spray coating were strong in the order of Zn, Amdry. It showed that Corroded specimens cracked or exfoliated easily, even with the small energy, because those had a comparatively weakened adhesive property, due to corrosion. 4. Zn specimen showed no corrosion phenomena on the surface of the substrates, because they had the function of sacrifice anode however, Amdry625 specimen showed the corrosion, because it did not have that function.

• Korean Journal of Community Nutrition
• /
• v.5 no.2
• /
• pp.297-306
• /
• 2000

In order to examine the relationship between the number of different foods consumed and nutrient intake, one-day food consumption were surveyed by 24-hour recall from a sample of 287 individuals(20-49 years) living in Daejon City. The number of consumed food items did not include seasonings except red pepper power, sugar, oil, and soybean paste when used in large amounts(DVS). The number, including all seasonings except salt and vinegar(DVSS), was also counted. Of the total subjects, 43.6%(DVS) or 39.0%(DVSS) consumed 18-23 daily different foods with an average of 20.2 or 22.9, respectively. As the DVS increased, daily intakes of total foods and most food groups were elevated. Cereals however were not changed and eggs were decreased with increasing DVS. Energy and nutrient intakes and their mean adequacy ratio(MAR) and index of nutritional quality(INQ) also show positive correlations with DVS. MAR equal to or greater than($\geq$) 0.75 was taken as a cut-off point for nutritional adequacy. In that case, the mean INQ was shown to be $\geq$1. MRI(10) for energy and 9 nutrients and MAR(3) for Ca, vitamin A, and riboflavin were estimated. Form a regression analysis, when MAR(10) was 0.75, the DVS and DVSS were assumed to be 19.6 and 22.2, respectively. And when MAR(3) was 0.75, the DVS and DVSS were assumed to be 31.6 and 34.6, respectively. However the subjects whose MAR(3) was 0.75(0.7-0.8) 23.8(DVS) or 26.6(DVSS) different foods in average, and their mean intakes of energy and all nutrients, except vitamin A, were ranged at 85-100% of the RDA. Of the 74 subjects who consumed DVS$\geq$24, 24 to 42 numbers took 〈75% RDA of Fe, Ca, riboflavin, and vitamin A. And five of 7 who consumed DVS$\geq$32 took $\geq$125%RDA of protein, which showed concerns of overnutrition in case of DVS$\geq$32. Form the above results it could be suggested that a daily intake of 24-32(or 28) of DVS or 27-35(or 31) of DVSS was recommendable for an optimal nutritional of all nutrients if the variety of food groups and sufficient intake of vitamin A and calcium were emphasized together.

• Clean Technology
• /
• v.27 no.3
• /
• pp.255-260
• /
• 2021

A drawback in the CO₂ capture process using an aqueous amine solution is the high energy requirement for the regeneration process. In order to overcome this disadvantage, this study investigated CO₂ capture characteristics using a biphasic absorbent in which isopropanol (IPA) was introduced into an aqueous solution of diethylenetriamine (DETA). When the IPA composition exceeded 20 wt% in 20 wt% DETA aqueous solution, the absorbent phase was liquid-liquid separated into a CO₂-rich phase and a CO₂-lean phase because of the low solubility of the salt formed by the reaction of CO₂ with DETA in isopropanol. When the isopropanol composition in the DETA aqueous solution increased, the phase volume ratio of the CO₂-rich phase to the volume of the CO₂-lean phase increased; and, accordingly, the CO₂ in the CO₂-rich phase was more concentrated. The results of absorbing CO₂ in a packed tower using 20 wt% DETA + IPA + water absorbent confirmed that both the CO₂ absorption capacity and the absorption rate were higher than that of the 20 wt% DETA aqueous solution. When a biphasic absorbent composed of DETA + IPA + water is applied to CO₂ capture, it can be expected to concentrate CO₂ because of phase separation and thereby reduce regeneration energy owing to volume reduction of the CO₂-rich phase.