• Korean Journal of Materials Research
• /
• v.9 no.10
• /
• pp.985-991
• /
• 1999

Corrosion behaviors of Incoloy 800H, KSA(Kaeri Superalloy)-6, Inconel 600 and Hastelloy C-276 in molten salts were investigated in the temperature range of 650 ~ $850^{\circ}C$. Due to $\textrm{Li}_{2}\textrm{O}$-induced basic fluxing mechanism, the corrosion rates of the alloys in mixed molten salt of LiC1-$\textrm{Li}_{2}\textrm{O}$ were significantly higher than those in molten salt of LiCl. In the mixed molten salt, Fe-base alloys showed higher corrosion resistance than the Ni-base alloys. and Hastelloy C-276 with high Mo and W contents exhibited the highest corrosion rate among the examined alloys. The single layer of $\textrm{LiCrO}_{2}$ was formed in molten salt of LiCl and two phase structure of a scale consisted of oxides and Ni was formed in the mixed molten salt.

• Korean Journal of Materials Research
• /
• v.12 no.1
• /
• pp.3-9
• /
• 2002

The corrosion behavior of alloys in a molten salt was investigated along with the oxidation characteristics in the air. The basic composition of alloys in the study was Fe-25Ni-7Cr with Si and RE(rare-earth metal) as additives. The corrosion rate of the alloys was low in a molten salt of LiCl while the rate was high in the mixed molten salt of LiCl and $Li_2O$. When Si is added to the base alloy of Fe-25Ni-7Cr, corrosion resistance was improved as the Si content is increased up to 3%, however, it was observed that the corrosion resistance was getting worse as the Si content is increased. The base alloy with 2.43% of Si and 0.9% of RE(KSA-65), showed higher corrosion rate compared to that of KSA-63 alloy with an equivalent amount of only Si. The corrosion resistance of KSA-65 was similar to that of the base alloy(KSA-60). The oxidation resistance of KSA-65 alloy was greatly increased even at $850^{\circ}C$ for a long term exposure.

• Applied Chemistry for Engineering
• /
• v.18 no.4
• /
• pp.361-365
• /
• 2007

The precipitation reaction of some rare earth chlorides ($Ce/Nd/GdCl_3$) in a LiCl-KCl molten salt has been carried out by reaction with oxygen. Identification of rare earth precipitates by reaction with oxygen and effects of oxygen sparging time (max. 420 min) and molten salt temperature ($450{\sim}750^{\circ}C$) on conversion were investigated. In this study, regardless of the oxygen sparging time and the molten salt temperature, oxychlorides (REOCl) for $NdCl_3$ and $GdCl_3$, and an oxide ($REO_2$) for $CeCl_3$ are formed as a precipitate, which are identical with the estimation results of Gibbs free energy of reaction (${\Delta}G_r$). The conversion of rare-earth chlorides into insoluble precipitates was described by using a conversion ratio. The conversion ratio increased exponentially with the oxygen sparging time and finally showed asymptotic value, over 0.999 at $750^{\circ}C$ of the molten salt temperature and over 300 min of sparging time conditions. The conversion ratios were increased with the molten salt temperature. In case of $CeCl_3$, when the sparging time exceed 60 min, the values of the conversion ratio were nearly constant over 0.999 in all experimental temperature conditions.

• Resources Recycling
• /
• v.31 no.3
• /
• pp.81-87
• /
• 2022

Energy consumption per unit weight of metal (kwh/kg of metal) is one of the most important economic indicators in the process of molten salt electrolysis. It is related to the heat loss of salt bath and the current efficiency of the process. The current efficiency is highly dependent on electrolysis temperature. On the other hand, the temperature of salt bath may increase significantly due to the difference (larger energy input than consumption) in heat balance at the beginning of electrolysis, which may cause different electrolysis temperature from an initially targeted value. This results in a bad effect on current efficiency. Therefore, it will be helpful to the reduction of energy consumption to compare the calculated and measured values of the temperature change of salt bath through the heat balance review at the early stage of electrolysis and to evaluate the energy loss to outside. In this study, based on the authors' experimental data, the heat balance was reviewed at the beginning of the electrolysis, and it was possible to evaluate the energy loss to the outside and the increase of the temperature of the salt bath quantitatively. Through such a method, heat loss reduction plan can be derived and current efficiency can be improved so that energy consumption can be reduced.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2023.04a
• /
• pp.38-38
• /
• 2023

Sorghum (Sorghum bicolor L.) is a promising biomass crop with a high lignocellulose content. This study aimed to select high salt-tolerance sorghum lines for cultivation on reclaimed land. Using 7-day seedlings of the sorghum population consisted of 71 radiation-derived mutants (M₂ to M₆) and 33 genetic resources, survival rate (SR), plant height (PH), root length (RL), fresh weight (FW), and chlorophyll content (CC) were measured for two weeks after 102 mM (0.6%) NaCl treatment. Furthermore, the characteristics of the sorghum population were confirmed using correlation analysis, PCA (principal component analysis), and the FCE (fuzzy comprehensive evaluation) method. Under 102 mM NaCl conditions, SR ranged from 4.9 (IS645-200-6) to 82.4% (KLSo79125-200-1), with an average of 49.9%. PH varied from 7.5 (Mesusu-100-2) to 33.2 cm (DINE-A-MITE-100-2-10), with an average of 20.4 cm. RL ranged from 1.0 (IS645-200-1) to 17.0 cm (30-100-2), with an average of 7.7 cm. FW varied from 0.1 (IS645-200-6) to 4.5 g/plant (DINE-A-MITE-100-2-10), with an average of 2.1 g/plant. CC ranged from 0.9 (DINE-A-MITE-100-2-2) to 3.1 mg/g (IS12937), with an average of 1.7 mg/g. An overall positive correlation, with SR and FW (r = 0.86, P < 0.01), and FW and CC (r = 0.79, P < 0.01), was shown by correlation analysis. Among the five traits, two principal components were extracted by PCA analysis. PC1 was significantly associated with FW, while PC2 was highly involved with RL. To evaluate the salt tolerance level of the sorghum population when an FCE based on trait data was performed, MFV (membership function value) was 0.68. As a result of compiling the MFV of each line, eight lines with MFV > 0.68 were selected. Ultimately, the radiation-derived mutant lines, DINE-A-MITE-100-2-10 and DINE-A-MITE-100-2-12 were selected as salt-tolerant sorghum lines. The results are expected to inform salt-tolerant sorghum breeding programs, and the high salt-tolerance sorghum lines might be advantageous for cultivation on reclaimed land.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.689-695
• /
• 2003

Electrochemical decontamination process has been applied for recycle or self disposal with authorization of large amount of metallic wastes contaminated with uranium compounds such as $UO_2$, ammonium uranyl carbonate (AUC), ammonium di-uranate (ADU), and uranyl nitrate(UN) with tributylphosphate(TBP) and dodecane, which are generated by dismantling the contaminated system components and equipment of a retired uranium conversion plant in Korea Atomic Energy Research Institute (KAERI). Electrochemical decontamination for metallic wastes contaminated with uranium compounds was evaluated through the experiments on the electrolytic dissolution of stainless steel as the material of the system components in neutral salt electrolytes. The effects of type of neutral salt as the electrolyte, current density, and concentration of electrolyte on the dissolution of the materials were evaluated. Decontamination performance tests using the specimens taken from a uranium conversion plant were quite successful with the application electrochemical decontamination conditions obtained through the basic studies on the electrolytic dissolution of structural material of the system components.

• Journal of Advanced Engineering and Technology
• /
• v.4 no.4
• /
• pp.431-436
• /
• 2011

This study was carried out to reduce the problem during distillation process, which separate U, TRU (TRans Uranium) metal electro deposit, Cd and LiCl-KCl eutectic salt generating from LCC (Liquid Cadmium Cathode) electro winning process. The cadmium recovering apparatus was manufactured to separate for each metal using solid-liquid separation method. The apparatus consists of the first sieve for the separation of U and TRU metal electrodeposit, the second sieve for the separation of LiCl-KCl eutectic salt, cadmium collection basket, and a heating furnace. In addition, the size of each sieve is 2 mm to 3 mm. In this experiment, a metal wire was employed to replace TRU metal electrodeposit and U, which exist actually in a LCC crucible. In the solid state, The LiCl-KCl is separated at 340℃ at which the solid and the liquid of the remaining cadmium and LiCl-KCl eutectic salt coexists in each, after the metal wire separated at 500℃. As a result, it seems that it would be beneficial to set the processing condition in the distillation process with the additional treatment process of cadmium and LiCl-KCl eutectic salt.

• Journal of Life Science
• /
• v.15 no.1 s.68
• /
• pp.61-65
• /
• 2005

Using two japonica rice cultivars (Ilpumbyeo and Sanghaehyanghyella), which are distinguishable by the brown planthopper (BHP) resistance maker (R208), a relationship between the BPH resistance gene (Os-Bil) and salt-tolerance was investigated. To do this, changes in the expression level of Os-Bil by the salt stress were quantified by the real-time PCR in the two cultivars, and compared with those in other two indica rice cultivars (Pokkali and IR29). In Ilpumbyeo, the expression level of Os-Bil decreased by the treatments of 50 and 200 mM NaCl in a concentration-dependent manner, and in Sanghaehyanghyella it rather increased slightly at 50 mM but decreased drastically at 200 mM. Comparably, IR29, a salt-sensitive cultivar, showed a reduction of the Os-Bil gene expression after the treatment of 100 mM NaCl, but Pokkali, a salt-tolerance cultivar, rather increased about two times in the level of Os-Bil transcripts. These results suggest that the BPH resistance gene may involve in the difference in the salt-tolerance at least between the two indica rice cultivars.

• Nuclear Engineering and Technology
• /
• v.42 no.2
• /
• pp.183-192
• /
• 2010

An electrochemical reduction of a mixture of metal oxides was conducted in a LiCl molten salt containing 3 wt% $Li_2O$ at $650^{\circ}C$. The oxide reduction was carried out by applying a current to an electrolysis cell, and the $Li_2O$ concentration was analyzed during each run. The concentration of $Li_2O$ in the electrolyte bulk phase gradually decreases according to Faraday's law due to a slow diffusion of the $O^{2-}$ ions. A hindrance effect of the unreduced metal oxides was observed for the reduction of the uranium oxide. Cs, Sr, and Ba of high heat-load fission products were diffused into and accumulated in the salt phase as predicted with thermodynamic consideration.

• Journal of Hydrogen and New Energy
• /
• v.26 no.1
• /
• pp.54-63
• /
• 2015

The secondary battery using sodium is investigating as one of power storage system and power in electric vehicles. The secondary battery using sodium as a sodium battery and sodium ion battery had merits such as a abundant resources, high energy density and safety. Sodium battery (sodium molten salt battery) is operated at lower temperature ($100^{\circ}C$) compared to NAS and ZEBRA battery ($300{\sim}350^{\circ}C$). Sodium ion battery is investigating as one of the post lithium ion battery. In this paper, it is explained for the principle and recent research trends in sodium molten salt and sodium ion battery.