• Journal of the Korea Organic Resources Recycling Association
• /
• v.20 no.3
• /
• pp.27-33
• /
• 2012

According to the statistics of the Ministry of Environment, the emission of sewage sludge is increased by 7~9% yearly. In the future, it will be increased continuously because of extension of sewage disposal plants, high class treatment for removing nitrogen and phosphorus. Until now, we have depended on reclamation for lots of quantity and some part has been treated by ocean emission. But, direct reclamation of organic waste will be prohibited and even ocean emission will be prohibited now, so the treatment of sludge is put on emergency alert. Bio-gas can be produced by applying anaerobic digestion method for the recycling or refuse derived fuel can be conducted by applying carbonization method. However, the process is difficult, causes bad smell and makes it the second waste, so it cannot be practical method in fact. This study applied a fluidized bed combustor for sewage sludge treatment technologies that can actually take advantage of key technologies in order to verify its purpose is to demonstrate selected. If applying the fluidized bed combustor, it can be easily utilized as the replaced resource of energy(fuel) in the countries whose energy resources are insufficient, like our country. Especially, if applying only original strengths of the fluidized bed combustor sufficiently, the sewage sludge can be treated simply, eco-friendly, sanitarily and economically. Particularly, it is verified as the energy technology suitable for government's green growth policy.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.2 no.1
• /
• pp.19-29
• /
• 1994

The purpose of this study was to investigate the feasibility of composting of vegetable wastes containing high moisture. The parameters investigated were the effect of energy source addition, difference in bulking agent and recirculation of leachate produced during composting. Laboratory scale composting reactors were used in this study. Chinese cabbages were used as a vegetable waste. Dog food was added to the vegetable waste as a energy source. Wood chips and leaves of platan were used as bulking agents. There may be an appropriate amount of energy source to be added for composting high moisture content vegetable waste. In this study, the appropriate amount of energy source was 20% of the vegetable waste by weight basis. Recirculation of total amount of leachate produced each day on the same day may not be an appropriate approach due to the significant heat-quenching effect. When the total amount of leachate produced was equally devided and recirculated everyday through the whole composting period, the heat-quenching effect was comparatively less significant. There were no notable differences in the temperature profile and the $CO_2$ evoluation rate when leaves were used instead of wood chips as bulking agents. Considering waste recycling, it is desirable to use leaf waste as bulking agents if available, because the leaves are also wastes to be disposed of.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.04a
• /
• pp.199-202
• /
• 2009

Domestic new recycling energy supply is on the way in various form and capacity locally through the support of governmen aid. Among these, solar energy supply is the most in scale and facility. In this paper, we intended to analysis the characteristics of solar energy operation system with season.

• Journal of electromagnetic engineering and science
• /
• v.10 no.4
• /
• pp.256-262
• /
• 2010

This paper discussed the following. 1. After reaching the final phase of an oil-based society, a resource-saving and -recycling "Methane Energy-based Society" will come about because of limited natural resources. 2. Industrial Infrastructure Technologies which support the Methane Energy-based Society will cause a paradigm shift in the area of industrial, transportation and civilian sectors. 3. The Non-communication application technology of microwaves plays an important role as one of the core element technologies which comprise new industrial infrastructure technologies.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.73.1-73
• /
• 2001

To utilize the uranium resources contained in the spent nuclear fuel generated from the nuclear power plants, the remote handling and dismantling technology is required. The dismantling process of the sport fuel is the most common process involved in the spent fuel recycling, the rod consolidation and the disposal processes. Since the machine used in the dismantling process are located and operated in isolated space, so called a hot cell, the reliability of machines is very important. To enhance the reliability of the process, in this research, the graphical monitoring system is developed for the fuel dismantling process. The graphic model of each machine is composed of many parts and every parts of the graphic model are given their own kinematics. Using the kinematics and simulating the graphic model in the virtual environment, the validity of the conceptual design can be verified before ...

• Transactions of the Korean hydrogen and new energy society
• /
• v.30 no.4
• /
• pp.362-368
• /
• 2019

Electric vehicles contribute greatly to energy conservation, $CO_2$ reduction and energy security through high fuel economy and various electric sources. Electric cars have a huge economic impact. More than 14 million hybrid electric cars have been sold worldwide. More than 3 million plug-in electric vehicles have been sold worldwide. The environmental impact depends greatly on the amount of national power generation, and as the electric grid becomes more and more carbon-intensive, countries are increasingly adopting hybrid and electric vehicles. Electricity is expanding beyond cars. Electric buses, trucks, and ships have similar benefits.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.3
• /
• pp.326-332
• /
• 2011

The authors examined the effects of operating parameters on the $H_2$ production by dark fermentation of the wastewater generated from food waste recycling facilities, in short "food waste wastewater (FWW)". Central composite design based response surface methodology was applied to analyze the effect of initial pH (5.5-8.5) and substrate concentration (2-20 g Carbo. COD/L) on $H_2$ production. The experiment was conducted under mesophilic ($35^{\circ}C$) condition and a heat-treated ($90^{\circ}C$ for 20min)anaerobic digester sludge was used as a seeding source. Although there was a little difference in carbohydrate removal, $H_2$ yield was largely affected by the experimental conditions, from 0.38 to 1.77 mol $H_2$/mol $hexose_{added}$. By applying regression analysis, $H_2$ yield was well fitted based on the coded value to a second order polynomial equation (p = 0.0243): Y = $1.78-0.17X_1+0.30X_2+0.37X_1X_2-0.29X_1{^2}-0.35X_2{^2}$, where $X_1$, $X_2$, and Y are pH, substrate concentration (g Carbo. COD/L), and hydrogen yield (mol $H_2$/mol $hexose_{added}$), respectively. The 2-D response surface clearly showed a high inter-dependency between initial pH and substrate concentration, and the role of these two factors was to control the pH during fermentation. According to the statistical optimization, the optimum condition of initial pH and substrate concentration were 7.0 and 13.4 g Carbo. COD/L, respectively, under which predicted $H_2$ yield was 1.84 mol $H_2$/mol $hexose_{added}$. Microbial analysis using 16S rRNA PCR-DGGE showed that $Clostridium$ sp. such as $Clostridium$ $perfringens$, $Clostridium$ $sticklandii$, and $Clostridium$ $bifermentans$ were main $H_2$-producers.

• Journal of Korean Society on Water Environment
• /
• v.32 no.3
• /
• pp.253-260
• /
• 2016

To reduce energy consumption in wastewater treatment plants (WWTPs), renewable energy applications such as small hydropower, solar energy, and wind energy are popular. However, it should be noticed that energy originated from operation of wastewater treatment process can be reduced through optimized operation based on analysis of factors affecting energy. In this research, the relationship to the various operational variables and influent factors was explored using correlation analysis and decision tree algorithm. Due to the non-linear characteristics of the process, it was difficult to find clear linear patterns through correlation analysis. However, decision tree algorithm showed its usefulness in uncovering hidden patterns that consume energy. As operational factors, influent flowrate, the amount of aeration, nitrate recycling pumping rate, and sludge wasting pumping rate were selected as important factors. For environmental factors associated with influent compositions and removal rate, BOD and T-N removal rate were selected as significant factors.

• Resources Recycling
• /
• v.21 no.4
• /
• pp.3-15
• /
• 2012

Remanufacturing is a series of industrial process by which retired or non-functional products are restored to a like-new condition. The remanufacturing industry provides much more economical and environmental benefits in view of significant materials and energy savings than existing material recycling way. It also has an effect on the substitute of natural resources, and gives the opportunity of high employment creation due to its highly labor intensive work. This paper thus presents the features of remanufacturing and its various benefits, and current status of domestic and overseas remanufacturing industry including USA, Europe, Japan and China. Furthermore, three major tasks for promoting the remanufacturing industry in Korea have been proposed based on the analysis of remanufacturing activities, technologies and related system in advanced countries.

• The korean journal of orthodontics
• /
• v.47 no.4
• /
• pp.238-247
• /
• 2017

Objective: The aim of this study was to compare recycled and unused orthodontic miniscrews to determine the feasibility of reuse. The comparisons included both miniscrews with machined surfaces (MS), and those with etched surfaces (ES). Methods: Retrieved MS and ES were further divided into three subgroups according to the assigned recycling procedure: group A, air-water spray; group B, mechanical cleaning; and group C, mechanical and chemical cleaning. Unused screws were used as controls. Scanning electron microscopy, energy-dispersive X-ray spectrometry, insertion time and maximum insertion torque measurements in artificial bone, and biological responses in the form of periotest values (PTV), bone-implant contact ratio (BIC), and bone volume ratio (BV) were assessed. Results: Morphological changes after recycling mainly occurred at the screw tip, and the cortical bone penetration success rate of recycled screws was lower than that of unused screws. Retrieved ES needed more thorough cleaning than retrieved MS to produce a surface composition similar to that of unused screws. There were no significant differences in PTV or BIC between recycled and unused screws, while the BV of the former was significantly lower than that of the latter (p < 0.05). Conclusions: These results indicate that reuse of recycled orthodontic miniscrews may not be feasible from the biomechanical aspect.