• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.12
• /
• pp.66-74
• /
• 2009

This study investigated and analyzed electrical energy curtailment effect by each business department and by energy use efficiency elevation equipment because do an energy use plan that is enforced in each variety business that is developed in domestic by model. When plan the recent electrical energy use with this, I wish to contribute in energy use general planning establishment improvement that is aiming energy efficiency improvement newly by groping improvement plan moment deduce problem. Specially, search present condition and problem by electrical energy curtailment equipment application that probes mass and analyzed, and is applied in present our country according to analysis contents to the latest energy use plan that was enforced on energy use rationality narration but allowed purpose.

• Journal of Nutrition and Health
• /
• v.8 no.1
• /
• pp.61-64
• /
• 1975

This study is designed to find out the mineral contents in Korean foods. In the previous report Part I, Sodium and Potssium contents in vegetables and fruits commonly used in Korean households were analyzed. In this report Part II, Sodium and Potassium contents in cereals are analyzed. Cereals, as a main dish, are one of the most important energy source for Koreans. The data analyzed are shown in Table 1, Table 2, in this report and these will be used as a fundamental guide in planning Sodium-restricted diets in Korea.

• Journal of Food Hygiene and Safety
• /
• v.11 no.1
• /
• pp.1-5
• /
• 1996

This study is performed to identify the contents of nitrosamine in meat (beef, pork) and meat product (ham, bacon, sausage) by gas chromatograph-thermal energy analyzer. The author also determained the formation of nitrosamine in these products when they were cooked in frying pan at 21$0^{\circ}C$ for 4 minutes and microwave for 45 and 75 seconds. N-ni-trosodimethylamine (NDMA) analysis was impossible in the most products because of their impurieties. On the other hand, N-nitrosopyrrolidine (NPYR) of 0~9.4 ug/kg in meat and 0~15.6 ug/kg in meat products were detected, respectively. When meat and meat products were cooked, generally contents of NDMA and NPYR have a tendency to be increased a little. Meat and product being cooked in microwave rather than frying pan, contents of NDMA and NPYR were detected more. Especially, in sausage contained much flsh, contents of NDMA was detected more.

• The Journal of the Korea Contents Association
• /
• v.22 no.9
• /
• pp.85-94
• /
• 2022

In modern society, environmental and energy problems have caused to replace cars with environment friendly energy. Vehicles with internal combustion engine which use petroleum are one of the factors that influence global pollution due to environment problems such as fine dust and ozone layer destruction. In addition use of energies for automobile making resources to become depleted. To solve this limited oil energy problem by using other energy sources. To the problem using electric energy and green energy as alternative for a solution. Among environment friendly energies this paper studies the possibility of drive service for autonomous vehicles that self-charges using only solar energy and whether they can be used as pollution free and alternative energy for automobiles. Studies was researched based on published literature review, data from ministry of transportation and automobile companies. Also case of electric vehicle and prototype automobile using only solar energy and the theory of near future technologies. Many automakers are using electric cars as alternative energy. Also making efforts to use solar energy as an substitute energy source and as a way to supplement electricity. Results show that there is a potential on operating autonomous vehicle using only solar energy. Furthermore, it will be possible to use automobiles actively, also use and supply solar energy. This paper suggest the possibility of contributing to the future of the automotive industry.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.329-332
• /
• 2002

A theoretical study is made of the steady flow of a compressible fluid in a rapidly rotating finite cylinder. Flow is generated by imposing mechanical and/or thermal disturbances at the rotating endwall disks. Both the Ekman and Rossby numbers are small. A detailed consideration is given to the energy budget for a control volume in the Ekman boundary layer. A combination of physical variables, which is termed the energy contents, consisting of temperature and modified angular momentum, emerges to be relevant. The distinguishing features of a compressible fluid, in contrast to those of an incompressible fluid, are noted. For the Taylor-Proudman column to be sustained, in the interior, it is shown that the net energy transport between the solid disk wall and the interior fluid should vanish. Physical rationalizations are facilitated by resorting to the concept of the afore-stated energy content.

• Journal of Digital Contents Society
• /
• v.19 no.6
• /
• pp.1219-1224
• /
• 2018

Nowaday, smart mobile devices on Internet of Things are required to process and deliver greate amount of data in real-time. Therefore, heterogeneous mult-core architecture such the big.LITTLE core architecture, which shows high energy conservation while guaranteeing high performance, are widely employed on up to date smart mobile devices. The LITTLE cores should be highly utilized to gain higher energy conservation because LITTLE cores have much higher energy efficiency than big cores. In this paper, we propose a core selection algorithm, which tries to firstly assign a real-time task on a LITTLE core rather a big core while the task can be finished within its own deadline. We also perform simulation as performance evaluation to show that our proposed algorithm shows higher energy conservation while guaranteeing the required performance.

• The Journal of the Korea Contents Association
• /
• v.11 no.6
• /
• pp.51-58
• /
• 2011

One of the objectives of research on routing methods in wireless sensor networks is maximizing the energy life of sensor nodes that have limited energy. In this study, we tried to even energy use in a wireless sensor network by giving a weight to the transition probability of ACS(Ant Colony System), which is commonly used to find the optimal path, based on the amount of energy in a sensor and the distance of the sensor from the sink. The proposed method showed improvement by 46.80% on the average in energy utility in comparison with representative routing method GPSR (Greedy Perimeter Stateless Routing), and its residual energy after operation for a specific length of time was 6.7% more on the average than that in ACS.

• The Journal of the Korea Contents Association
• /
• v.12 no.5
• /
• pp.1-9
• /
• 2012

The popularity of digital music and smart phones led to develope noise-robust real-time audio fingerprinting system in various ways. In particular, The Multiple Hashing(MLH) of fingerprint algorithms is robust to noise and has an elaborate structure. In this paper, we propose a filter engine based on MLH to achieve better performance. In this approach, we compose a energy-intensive filter to improve the accuracy of Q/R from music database and a statistic filter to remove continuity and redundancy. The energy-intensive filter uses the Discrite Cosine Transform(DCT)'s feature gathering energy to low-order bits and the statistic filters use the correlation between searched fingerprint's information. Experimental results show that the superiority of proposed algorithm consists of the energy and statistical filtering in noise environment. It is found that the proposed filter engine achieves more robust to noise than Philips Robust Hash(PRH), and a more compact way than MLH.

• The Journal of the Korea Contents Association
• /
• v.10 no.2
• /
• pp.14-24
• /
• 2010

Because WSNs operate with limited resources of sensor nodes, its life is extended by cluster-based routing methods. In this study, we use data on direction, distance, density and residual energy in order to maximize the energy efficiency of cluster-based routing methods. Through this study, we expect to minimize the frequency of isolated nodes when selecting a new cluster head autonomously using information on the direction of the upper cluster head, and to reduce energy consumption by switching sensor nodes, which are included in both of the new cluster and the previous cluster and thus do not need to update information, into the sleep mode and updating information only for newly included sensor nodes at the setup phase using distance data. Furthermore, we enhance overall network efficiency by implementing secure and energy-efficient communication through key management robust against internal and external attacks in cluster-based routing techniques. This study suggests the modified cluster head selection scheme which uses the conserved energy in the steady-state phase by reducing unnecessary communications of unchanged nodes between selected cluster head and previous cluster head in the setup phase, and thus prolongs the network lifetime and provides secure and equal opportunity for being cluster head.

• Journal of Radiation Industry
• /
• v.4 no.3
• /
• pp.277-283
• /
• 2010

Rape (Brassica napus L.) plants are one of the major oilseed crops. The main components of rapeseed are oil (35 to 47%) and protein (15 to 32%). For the biodiesel production, the development of a new variety of rape plant with high biomass and/or oleic acid contents is required. In order to determine the optimum dose of gamma-ray irradiation, the rape seeds of cvs. Hanra (Hr), Youngsan (Ys), Tammi (Tm), and Tamra (Tr) were irradiated with a 100~4,000 Gy dose range of gamma-rays. Considering the growth factors, the optimum doses were determined to be within the range of 600~1,000 Gy for the selection of useful mutant lines. Six-hundred and eighty-eight (688) $M_2$ mutant lines were obtained from 600~1,000 Gy gamma-ray-irradiated $M_1$ plants through selfing. The growth characteristics, leaf shape, early flowering, and flower color were all investigated. The selected mutant numbers of early flowering, leaf shape, and flower color were 34, 52, and 3 from the four cultivars, respectively. These mutant lines will be used for the development of a new variety of rape plant with high biomass and oleic acid contents.