• 대한기계학회논문집B
• /
• 제27권11호
• /
• pp.1645-1654
• /
• 2003

When vortex shedding is locked-on to a single frequency oscillatory flow, the variations of vortex dynamics are investigated using a time-resolved PIV system. Wake regions of recirculation and vortex formation, dynamic behavior of the shed vortices and the Reynolds stress fields are measured in the wake-transition regime at the Reynolds number 360. In the lock-on state, reduction of the wake region occurs and flow energy distributed downstream moves upstream being concentrated near the cylinder base. To observe the dynamic behavior of the shed vortices, the trajectory of the vortex center extended to the inside of the wake bubble is considered, which describes well the formation and evolution processes. The Reynolds stresses and their contributions to overall force balance on the wake bubble manifest the increase of the drag force by the lock-on.

• Journal of Mechanical Science and Technology
• /
• 제15권7호
• /
• pp.921-930
• /
• 2001

A new theoretical critical heat flux (CHF) model was developed for the forced convective flow boiling at high pressure, high mass velocity, and low quality. The present model for an intermittent vapor blanket was basically derived from the sublayer dryout theory without including any empirical constant. The vapor blanket velocity was estimated by an axial force balance, and the thickness of vapor blanket was determined by a radial force balance for the Marangoni force and lift force. Based on the comparison of the predicted CHF with the experimental data taken from previous studies, the present CHF model showed satisfactory results with reasonable accuracy.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 E
• /
• pp.1837-1839
• /
• 1997

This study presents the energy transfer of thermal arc in the circuit breaker with self-generation flow without puffer action. The phenomenon of pressure increase in the cylinder which encloses fixed contact was focused on and rising current stage was considered. Temperature and velocity of arc plasma were calculated by using energy balance equation and the amount of energy transfer due to convective flow was calculated.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.341-344
• /
• 2002

A matched asymptotic analysis is conducted for a compressible rotating flow in a cylindrical container when a mechanical and/or a thermal disturbance is imposed on the wall. The system Ekman number is assumed to be very small. The conditions for the Taylor-Proudman column in the interior, which were also given in the companion paper Park & Hyun, 2002) by means of the energy balancing analysis, have been re-derived. The concept of the variable, the energy content $e[{\equiv}T+2 {\alpha}^2 {\gamma}{\nu}]$, is reformulated, and its effectiveness in characterizing the energy transport mechanism is delineated. It is seen that, under the condition of the Taylor-Proudman column, numerous admissible theoretical solutions for interior flow exist with an associated wail boundary condition. Some canonical examples are illustrated with comprehensive physical descriptions. The differential heating problem on the top and bottom endwall disks is revisited by using the concept of the energy content. The results are shown to be in line with the previous findings.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권1호
• /
• pp.77-99
• /
• 2017

Offshore oscillating water columns (OWC) represent one of the most promising forms of wave energy converters. The hydrodynamic performance of such converters heavily depends on their interactions with ocean waves; therefore, understanding these interactions is essential. In this paper, a fully nonlinear 2D computational fluid dynamics (CFD) model based on RANS equations and VOF surface capturing scheme is implemented to carry out wave energy balance analyses for an offshore OWC. The numerical model is well validated against published physical measurements including; chamber differential air pressure, chamber water level oscillation and vertical velocity, overall wave energy extraction efficiency, reflected and transmitted waves, velocity and vorticity fields (PIV measurements). Following the successful validation work, an extensive campaign of numerical tests is performed to quantify the relevance of three design parameters, namely incoming wavelength, wave height and turbine damping to the device hydrodynamic performance and wave energy conversion process. All of the three investigated parameters show important effects on the wave-pneumatic energy conversion chain. In addition, the flow field around the chamber's front wall indicates areas of energy losses by stronger vortices generation than the rear wall.

• 에너지공학
• /
• 제23권4호
• /
• pp.183-188
• /
• 2014

Solenoid operated electromagnetic control valve (ECV) using in an external variable displacement swash plate type compressor is widely used for air conditioning control system because of its low energy consumption and high efficient characteristics. ECV controls the entire vehicle air conditioning system by means of a pulse width modulation (PWM) system that supplied from an external controller. Different pressure ports located within ECV has important functions to control the air/refrigerant flow through its internal passages. The flow paths are preciously maintained with acceptable ranges of leakage (gap) between the parts inside it which is followed by effective design and critical dimensioning of its internal features. Therefore, it saves energy losses from the solenoid operation as well as ensures the balance of forces within it. The research paper highlights analysis of the leakages (at different pressure ports) and dimensioning tolerance factors that affects the ECV performance.

• 에너지공학
• /
• 제23권4호
• /
• pp.9-18
• /
• 2014

시험방법 중 현재 국내 자동차 연비계산 방법은 차대동력계에 시험차량을 설치한 후, 주어진 시험모드(FTP-75 & HWFET 모드 등)에 따라 차량을 주행하여 측정되어지는 배출가스 결과를 가지고 계산에 의해 연비를 구하는 방식인 카본발란스 측정법(Carbon balance method)을 이용하고 있다. 이때 사용하고 있는 카본발란스 측정법은 시험방법 개발 당시의 표준연료에 대해 연료물성을 구하고, 이때 구하여진 상수 값과 시험에서 측정되어진 THC, CO, $CO_2$ 값을 가지고 계산하게 된다. 그러므로 시험할 때마다 매번 바뀌게 되는 사용 연료의 연료물성 특성은 정확히 고려되지 않게 된다. 주어진 시험연료에 따라 엔진성능 및 배출가스 결과가 변하게 되고, 많은 대체연료가 나오고 있는 현 시점에서 시험연료의 물성 특성을 연비계산 시에도 고려해야만 된다고 생각된다. 본 연구에서는 기존에 사용하고 있는 카본발란스법과 실제 시험에 사용된 연료의 유량을 측정하는 유량측정 방법을 이용한 결과를 비교하여, 시험에 사용된 연료의 물성 특성을 고려할 수 있는 방법을 연구함으로서, 다양해지고 있는 연료의 물성 특성을 고려해 줄 수 있는 개선된 연비측정 방법을 검토해 보고자 한다.

• 항공우주기술
• /
• 제13권1호
• /
• pp.70-75
• /
• 2014

액체 로켓 엔진에 대한 에너지 밸런스 해석, 모드 해석, 비정상 해석 프로그램을 소개하였다. 유사 프로그램에 대한 결과, 공개된 실험 결과와 비교하여 해석 방법을 검증하였다. 에너지 밸런스 해석은 초기 개발 단계에서 활용된다. 모드 해석은 엔진 작동 조건, 시험조건 설정 및 엔진 성능 분산 분야에 활용된다. 비정상 해석을 통하여 추진제 유량, 추력, 비정상 조건에 대한 임펄스를 예측할 수 있다. 비정상 해석은 시동/종료 시퀀스 설정에 필수적이다. 본 해석 프로그램들은 한국형 발사체 엔진 개발에 활용될 것이다.

• 한국물환경학회지
• /
• 제27권3호
• /
• pp.342-348
• /
• 2011

A hydrodynamic separator using natural free energy provided by bridge was operated for the treatment of stormwater runoff. The separator was automatically controlled by using electronic valve which is connected with pressure meter. Normally the separator was opened during dry days, but it was closed after the capture of first flush. The results indicated that the average pressure and the flow rate were directly affected by the rainfall intensity. The pressure was more than 3 meters as the rainfall intensity was above 5 mm/hr. The percent volume of underflow decreased as the pressure and flow rate increased, but the percent volume of overflow showed an opposite behavior. The concentration of total suspended solids (TSS) in underflow increased as a function of increasing pressure while it decreased in overflow. The TSS separation efficiency was evaluated based on mass balance. It ranged from 30% to 90% with the pressure ranging from 2 to 10 meters, and it was proportional to pressure and flow rate. The analysis of water balance indicated that around 13% of total runoff was captured by the separator as a first flush, and this runoff was separated as underflow and overflow with the respective percent volume of 29% and 71%. The pollutants budget was also examined based on mass balance. The results showed that the percent of TSS, $COD_{cr}$, TN and TP in underflow were 73%, 59%, 7.6% and 49%, respectively.

• 대한기계학회논문집
• /
• 제13권5호
• /
• pp.999-1011
• /
• 1989

본 연구의 목적은 첫째, 재발달 경계층에서의 난류에서지 및 난류전단응력에 대한 전달방정식들의 각 항의 측정자료들을 보다 정확히 제시하고 항들간의 균형을 비교 평가함으로써 비평형 유동으로부터 평형유동으로 회복되는 과정을 검토하고, 둘째, 대표적인 난류 모델들로써 표존 k-.epsilon.모델 및 레이놀즈 응력 모델을 사용한 수치계산을 수행함으로써 이와같은 모델들이 비평형 유동을 서술함에 있어 발생될 수 있는 문제점들을 고찰하는데 있다.