• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.81-84
• /
• 2002

Activation energy value is different according to cement, admixture and water-cement ratio also the relation of age-temperature is as non-linear as activation energy value is large. So to make accurate explanation for the effect of temperature on concrete strength development property, it is necessary to investigation for activation energy value. This study compares activation energy value recommended by Freiesleben and ASTM with activation energy value obtained by consequence of mortar examination according to ASTM C 1074-93. As the result of this study, activation energy value obtained by the study is 37.19KJ/mol, and in case of activation energy value obtained by the study explain temperature's influence about concrete strength development more accurate than activation energy value recommend by Freiesleben and ASTM.

• Architectural research
• /
• v.15 no.4
• /
• pp.201-206
• /
• 2013

Special attention is required for the design of windows due to their high thermal vulnerability. This paper examines the problems that might arise in the application of the u-value, by reflecting the changes in the u-value of the window, depending on the window-to-wall ratio obtained in an energy demand analysis. Research indicates that the u-value of a window increases with an increase in the difference between the u-values of the frames and the glass. Relative to the changes in the u-value of the windows, the energy demand varied from 1.3% to 9.3%. Windows with a g-value of 0.3 or 0.5 displayed a higher energy demand than windows with a g-value of 0.7. Therefore, when the difference between the performance of the glass and the frame is significant, especially when the g-value is small, a modified heat transmission coefficient should be applied to the window size during the evaluation of the building energy demand.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.10a
• /
• pp.241-264
• /
• 2001

Due to the variation of equipments and test procedure, level of energy transferred to split spoon sampler varies and thus measured N value. Since the properties and parameters are estimated from empirical correlations related to N value, the correction of N value with respect to specific energy level is essential. Factors affecting N value are discussed and the results of previous studies on energy correction of SPT N value is reviewed. Part of results from joint research works with KHC are presented and the range of energy levels for the hammer and release system typically used in Korea is suggested.

• Applied Biological Chemistry
• /
• v.7
• /
• pp.29-33
• /
• 1966

This experiment was conducted to study the relationship between the energy value and the nitrogen content in the rat urine. Thirteen rats for ad libitum feeding group and 16 rats for two-meal group were employed in this experiment. The experimental period consisted of 22 days with a preliminary period of 10 days. During the last eight days of the experiment the urine was collected quantitatively. The rats fed two-meal per day excreted significantly (p<0.005) more nitrogen and energy in the urine than those fed ad libitum. A linear relationship between the energy concentration and nitrogen content was found. The urinary energy value was increased as the urinary nitrogen content was increased. A prediction equation was derived to compute the energy value from the content of nitrogen as follows: Y=8.924X+0.182 $S_{y{\cdot}x}=0.788$ where Y=urinary energy(kcal/100 ml) X=urinary nitrogen(gm/100 ml) Since the standard deviation of estimate is in small magnitude (0.788 kcal) when it is compared with the amount of intake of gross energy, digestible energy or metabolizable energy, this equation can be used safely to estimate the energy value from nitrogen content. Consequently, considerable amound of time and labor for the actual determination of energy can be saved. The ratio of energy to nitrogen was found to be 9.4 for ad adlibitum group and 8.6 for two-meal group. No significant difference between two group in this respect was observed.

• KIEAE Journal
• /
• v.13 no.2
• /
• pp.123-130
• /
• 2013

The primary goal of this research is to identify the impacts of window design on the energy use in buildings which takes up about 25% of the total energy consumption. Recently, efficient use of energy is gaining more importance in buildings. Window design, especially being dependent on glazing performance choices, is an important factor for reducing energy consumption in most of the buildings. It also is influenced by the latitude of the site and window orientation. This paper aims at identifying the influence of Window performance indicators(U-value, SHGC), orientation and latitude on the building energy consumption with systematically designed simulations. Comparative study has been performed for five different locations; Greenland, Korea, Singapore, Argentina and Chile along with the different window U-value and SHGC values. The results show that optimum window system with properly coordinated window performance indicators(U-value, SHGC), orientation achieves dramatic reduction of energy consumptions. Windows with low U-value could reduce heating loads and high SHGC could reduce cooling loads. The study also verifies that the windows installed at south facade is more energy efficient in the northern hemisphere while windows facing north is more energy efficient in the southern hemisphere.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2003.11a
• /
• pp.13-16
• /
• 2003

There is no study that application of the maturity using H.B.C and H.S.C. Also activation energy has different values according to the cement, admixture and water-cement ratio. Therefore to make accurate explanation for the effect of temperature on concrete strength development properties, it is necessary that activation energy value according to the kind of cement is reviewed. This study compares and estimates equivalent age using activation energy value obtained by this experiment and Freiesleben activation energy value with compressive strength of concrete. As the result of this study, activation energy value obtained by this study has more accurate explanation of temperature's influence on concrete strength development than Freiesleben activation energy value.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2003.05a
• /
• pp.13.1-16
• /
• 2003

There is no study that application of the maturity using H.S.C and H.S.C. Also activation energy has different values according to the cement, admixture and water-cement ratio. Therefore to make accurate explanation for the effect of temperature on concrete strength development properties, it is necessary that activation energy value according to the kind of cement is reviewed. This study compares and estimates equivalent age using activation energy value obtained by this experiment and Freiesleben activation energy value with compressive strength of concrete. As the result of this study, activation energy value obtained by this study has more accurate explanation of temperature's influence on concrete strength development than Freiesleben activation energy value.

• Journal of Climate Change Research
• /
• v.8 no.2
• /
• pp.145-151
• /
• 2017

Korea's energy consumption has been constantly increasing. Final energy consumption was increased by anannual average of 2.9% compared to 2010. The consumption of all energy sources except for its oil was increased during the same time. While electric demand has increased coal consumption increased rapidly. Therefore, calorfic value and carbon emission factor development can improve the quality of Korea's greenhouse gas inventory. Calorific value is the amount of heat generated while burning coal. Caloric value is one of the most important factors in the development of carbon emission factors. Calorific value is used as the basis for the analysis of the various energy statistics. This study has calculated the sub-bituminous coal's calorfic value by the data received from domestic coal-fired power plants. Calorofic value's trend analysis period is the year of 2011~2015. Through analyzing the carbon content it was calculated the carbon emission factor. The sub-bituminous coal's uncertainty analysis was performed using a Monte Carlo simulation.

• Journal of Soil and Groundwater Environment
• /
• v.21 no.6
• /
• pp.156-168
• /
• 2016

The Korean government is planning to invest a lot of funds for conservation of the soil. Accordingly, it needs quantitative information on the soil. This paper attempts to analyze the total value of soil quantitatively: the total economic value of soil can be divided into use value and non-use value. To this end, we apply a replacement cost method (RCM) and contingent valuation method (CVM). Especially, CVM is most widely used to measure the non-use value such as environment goods. We employed the one-and-one-half-bounded dichotomous choice (OOHBDC) for willingness to pay (WTP) elicitation and a spike model. The monthly mean WTP was estimated to be KRW 3,949 per household for the next 10 years, which is statistically significant at the 1% level. Expanding the value to the relevant population gives us KRW 897.9 billion per year and as of the end of 2015, the non-use value of soil was assessed to be KRW 838.6 billion. Meanwhile, use value is subdivided into direct use value and indirect use value. This value was calculated KRW 3,277 trillion and KRW 51.8 trillion, respectively. As a result, total economic value of soil is estimated to be KRW 3,330 trillion in Korea.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.3
• /
• pp.330-338
• /
• 2016

Phase change memory (PCM) has been studied as an emerging memory technology for last-level cache (LLC) due to its extremely low leakage. However, it consumes high levels of energy in updating cells and its write endurance is limited. To relieve the write pressure of LLC, we propose a delta value indicator (DVI) by employing a small cache which stores the difference between the value currently stored and the value newly loaded. Since the write energy consumption of the small cache is less than the LLC, the energy consumption is reduced by access to the small cache instead of the LLC. In addition, the lifetime of the LLC is further extended because the number of write accesses to the LLC is decreased. To this end, a delta value indicator and controlling circuits are inserted into the LLC. The simulation results show a 26.8% saving of dynamic energy consumption and a 31.7% lifetime extension compared to a state-of-the-art scheme for PCM.