• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1203-1208
• /
• 2010

Recently, there are environmental issues for sustainable transportation system to pursue the energy-efficient and environment-friendly public urban transit. These transportation system needs to offer demand-oriented high-quality service being on the same level with cab service for urban space. PRT(Personal Rapid Transit), small track-guided vehicle, is repeatedly mentioned as a possible alternative for the new urban public transportion system, but but there are not many researches on the operational optimal routing for PRT network. In this paper, the concept of PRT and general optimal routing methods are reviewed. And we suggest the optimal routing method for city-wide PRT network with multi-vehicles and stations, junctions and directional arcs. Futher research directions for PRT routing are presented.

• 대한안전경영과학회지
• /
• 제12권3호
• /
• pp.315-320
• /
• 2010

Recently, there are environmental issues for sustainable transportation system to pursue the energy-efficient and environment-friendly public urban transit. These transportation system needs to offer demand-oriented high-quality service being on the same level with cab service for urban space. PRT(Personal Rapid Transit), small track-guided vehicle, is repeatedly mentioned as a possible alternative for the new urban public transportion system, but but there are not many researches on the operational optimal routing for PRT network. In this paper, the concept of PRT and general optimal routing methods are reviewed. And we suggest the optimal routing method for city-wide PRT network with multi-vehicles and stations, junctions and directional arcs. Futher research directions for PRT routing are presented.

• 한국정보시스템학회지:정보시스템연구
• /
• 제27권2호
• /
• pp.95-114
• /
• 2018

Purpose The recent concern over environmental problems such as greenhouse gas emission and fine dust contributes increasing interest in renewable energies. However the intrinsic characteristics of renewable energies, intermittent and stochastic generation, might cause serious problems to the stability and controllability of power grid. Therefore countermeasures such as virtual power plant (VPP) must be prepared in advance of the spread of uncontrollable distributed renewable energy resources to be one of major energy sources. Design/methodology/approach This study deals with the design concept of the VPP platform. we proposed as a technology solution for achieving the stability of power grid by guaranteeing a single power profile combining multiple distributed power sources with ICT. The core characteristics of VPP should be able to participate in the grid operation by responding to operation instructions from the system operator, KPX, as well as the wholesale electricity market. Findings Therefore this study includes energy storage device(ESS) as a controllable component as well as renewable energy resources such as photovoltaic and wind power generation. Based on this configuration, we discussed core element technologies of VPP and protype design of VPP solution platform according to system requirements. In the proposed solution platform, UX design for the integrated control center and brokerage system were included as well as ancillary service function to respond to KPX's operation instruction with utilizing the capability of ESS. In addition, a simulator was suggested to verify the VPP operations.

• 유통과학연구
• /
• 제5권2호
• /
• pp.79-100
• /
• 2007

본 연구는 RFID를 이용한 창고관리시스템(Warehouse Management System; WMS), 통합주문관리시스템(Customer Service & Support System; CSS), 국제물류시스템(Delivery Management System)을 성공적으로 구축한 CJ GLS주식회사의 사례를 통한 구축효과에 대한 연구이다. 이를 위해 먼저 산업자원부 등에서 정책적으로 육성되고 있는 RFID, 즉 차세대 유비쿼터스 네트워크 사회의 핵심기술로 기대되고 있는 RFID의 개요 및 특징, 활용분야, 기술 및 실용화 동향 등에 관해 국내 및 외국의 사례를 소개하였다. 다음으로 효율적인 통합물류시스템 구축을 위해 RFID를 이용한 CJ GLS의 시스템 도입배경 및 목표, 시스템 구축의 개요 및, 구축효과를 분석하고, 결론으로 RFID의 향후전망 및 SCM 발전 방향을 제시하였다.

• Nuclear Engineering and Technology
• /
• 제39권4호
• /
• pp.273-286
• /
• 2007

This paper presents the research activities performed to date for the development of a supercritical pressure water-cooled reactor (SCWR) in Korea. The research areas include a conceptual design of an SCWR with an internal flow recirculation, a reactor core conceptual design, a heat transfer test with supercritical $CO_2$, an adaptation of an existing safety analysis code to the supercritical pressure condition, and an evaluation of candidate materials through a corrosion study. Methods to reduce the cladding temperature are introduced from two different perspectives, namely, thermal-hydraulics and core neutronics. Briefly described are the results of an experiment on the heat transfer at a supercritical pressure, an experiment that is essential for the analysis of the subchannels of fuel assemblies and the analysis of a system safety. An existing system code has been adapted to SCWR conditions, and the process of a first-hand validation is presented. Finally, the corrosion test results of the candidate materials for an SCWR are introduced.

• 한국전자통신학회논문지
• /
• 제12권1호
• /
• pp.47-52
• /
• 2017

본 연구는 한국전력 eIoT(: energy Internet of Thing) 플랫폼을 활용한 BIT(: Bus Information Terminal) 기능이고, 망구성은 터미널 디스플레이 디바이스, 게이트웨이, 플랫폼, 그리고 서비스서버로 구성 한다. 핵심기능들은 게이트웨이와 디바이스간 LoRa(: Long Range) 기술을 활용하여 프로토콜 데이터 전달하는 부분, 지능화된 애플리케이션 처리 부분 그리고 택시 예약 시스템에 연동되는 SIP(Session Initiation Protocol)데이터처리 부분이다. 그리고 BIT에서 서비스될 수 있는 리소스트리가 제시되며, 이것은 애플리케이션 서버와 디바이스에서 공통적으로 사용된다.

• 한국철도학회논문집
• /
• 제12권4호
• /
• pp.582-589
• /
• 2009

회생에너지는 회생 전동차와 역행 전동차의 순간적인 오버랩 경우를 제외하고, 전동차내 저항기 또는 전차선의 저항에 의해 열로서 사라지게 된다. 에너지자정시스템은 전동차 제동시 발생되어 재활용되지 못하고 사라지는 회생 에너지를 에너지저장시스템에 저장하고 전동차가 역행할 때 에너지저장시스템으로부터 에너지를 공급하여 도시철도시스템에서 회생 에너지를 재할용하는 시스템이다. 동시에 역행과 제동하는 차량이 존재하지 않을 지라도 차량간 에너지의 완전한 교환이 이루어 질 수 있다. 따라서 에너지저장시스템은 에너지를 저장하고 재활용함으로서 에너지를 절감할 수 있는 유용한 장치이다. 에너지저장시스템은 운행시격과 관계가 깊은데, 운행 시격이 짧은 경우보다 큰 경우 전동차 회생시 회생 에너지가 모두 에너지저장시스템으로 저장되므로 저장된 에너지를 활용할 수 있어 도시철도 운영기관의 에너지 절감율이 높아지게 된다. 반대로 운행 시격이 짧을 경우 한 변전소 구간 내에 전동차 여러 편성이있을 수 있다. 이때 하나의 전동차 회생시 이 회생 에너지가 주변의 역행 전동차에 공급되면 에너지저장시스템으로 들어오는 회생 에너지는 적을 것이다. 따라서 본 논문은 에너지저장시스템을 적용하는데 있어서 악조건인 운행 시격이 국내에서 가장 짧은 서울메트로 2호선을 대상으로 에너지저장시스템 적용 효과를 에너지절감 측면에서 현장 실측과 시뮬레이션을 통해 분석하고자 한다.

• Journal of Power Electronics
• /
• 제17권2호
• /
• pp.490-500
• /
• 2017

Fuel cell (FC) is a promising power supply in electric vehicles (EV); however, it has poor dynamic performance and short service life. To address these shortcomings, a super capacitor (SC) is adopted as an auxiliary power supply. In this study, the frequency decoupling control method is used in electric vehicle energy system. High-frequency and low-frequency demand power is provided by SC and FC, respectively, which makes full use of two power supplies. Simultaneously, the energy system still has rapidity and reliability. The distributed power system (DPS) of EV requires DC-DC converters to achieve the desired voltage. The stability of cascaded converters must be assessed. Impedance-based methods are effective in the stability analysis of DPS. In this study, closed-loop impedances of interleaved half-bridge DC-DC converter and phase-shifted full-bridge DC-DC converter based on the frequency decoupling control method are derived. The closed-loop impedance of an inverter for permanent magnet synchronous motor based on space vector modulation control method is also derived. An improved Middlebrook criterion is used to assess and adjust the stability of the energy system. A theoretical analysis and simulation test are provided to demonstrate the feasibility of the energy management system and the control method.

• Journal of Information Processing Systems
• /
• 제6권3호
• /
• pp.413-434
• /
• 2010

Wireless sensor networks are usually characterized by dense deployment of energy constrained nodes. Due to the usage of a large number of sensor nodes in uncontrolled hostile or harsh environments, node failure is a common event in these systems. Another common reason for node failure is the exhaustion of their energy resources and node inactivation. Such failures can have adverse effects on the quality of the real-time services in Wireless Sensor Networks (WSNs). To avoid such degradations, it is necessary that the failures be recovered in a proper manner to sustain network operation. In this paper we present a dynamic Energy efficient Real-Time Job Allocation (ERTJA) algorithm for handling node failures in a cluster of sensor nodes with the consideration of communication energy and time overheads besides the nodes' characteristics. ERTJA relies on the computation power of cluster members for handling a node failure. It also tries to minimize the energy consumption of the cluster by minimum activation of the sleeping nodes. The resulting system can then guarantee the Quality of Service (QoS) of the cluster application. Further, when the number of sleeping nodes is limited, the proposed algorithm uses the idle times of the active nodes to engage a graceful QoS degradation in the cluster. Simulation results show significant performance improvements of ERTJA in terms of the energy conservation and the probability of meeting deadlines compared with the other studied algorithms.

• 대기
• /
• 제34권1호
• /
• pp.1-21
• /
• 2024

Private companies are increasingly required to take more substantial actions on climate change. This study introduces the principle and cases of climate (physical) risk estimation for 11 private companies in Korea. Climate risk is defined as the product of three major determinants: hazard, exposure, and vulnerability. Hazard is the intensity or frequency of weather phenomena that can cause disasters. Vulnerability can be reflected in the function that explains the relationship between past weather records and loss records. The final climate risk is calculated by multiplying the function by the exposure, which is defined as the area or value of the target area exposed to the climate. Future climate risk is estimated by applying future exposure to estimated future hazard using climate model scenarios or statistical trends based on weather data. The estimated climate risks are developed into three types according to the demand of private companies: i) climate risk for financial portfolio management, ii) climate risk for port logistics management, iii) climate risk for supply chain management. We hope that this study will contribute to the establishment of the climate risk management system in the Korean industrial sector as a whole.