• Journal of East-West Nursing Research
• /
• v.5 no.1
• /
• pp.102-113
• /
• 2000

The study attempts to analyze the trends of study related with oriental nursing. This article reviewed 81 researches on oriental nursing from 1985 to July 2000, by examining them according to the articles' characteristics, sources by publication period, research design, nursing intervention effect of experimental study and concept, and content of literature review. The findings of the analysis can be summarized as follows; 1. The number of studies related with oriental nursing has progressively increased by year from 1985, and that of articles was the highest during the period between 1995 to 1999. Since the 1990s, the number of articles including thesis and dissertation increased, and a third of subject articles were thesis among them. 2. The majority of research design were survey and correlational studies, and most of them were published in the 1990s. Literature review articles also occupied a certain portion, and most of them were published after 1995. In addition, the research design of dissertation revealed in various types. 3. Nursing intervention used in the experimental study was Dan Jeon Breathing, San-Yin-Jiao (SP-6) Pressure, Percutanous Electrical Nerve Stimulation, Guided Imagery, Diet for Sasang Constitution, Yoga Exercise, Qigong Exercise, Meridian Massage, Bed Exercise Program, Health Contract and Structured Rehabilitation Education. Among the study subjects, patients with chronic illness were at the highest rate, and the most nursing intervention effects presented physiological effect, activities of daily living and relieving pain. In most studies, the affirmative effect proved. 4. The key concept of literature review articles is energy, oriental nursing, health promotion, oriental medicine management of illness and etc. Being important concepts to understand oriental nursing, they confirm similar perspective of oriental medicine and nursing and show simultaneously the importance of nursing considered into the cultural perspective. The summary of the above results shows a tendency that the thesis and dissertation have been relatively considered with various research designs, while the others have focused on literature review. Especially, experimental study proved affirmative effect through various experimental treatment of nursing intervention related with oriental medicine. Besides in the literature review, inquiry of theories and practical perspective, which is necessary for the establishment of oriental nursing, was introduced. However, for the establishment of oriental nursing, more studies are to be required along with development of nursing intervention related with health promotion.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.1
• /
• pp.8-15
• /
• 2013

Little research has been conducted to explore the heavy metal removal potential of biochar. The adsorption characteristics of heavy metals by sesame waste biochar (pyrolysis at $600^{\circ}C$ for 1 hour) as heavy metal absorbent were investigated. The sesame waste biochar was characterized by SEM-EDS and FT-IR, and heavy metal removal was studied using Freundlich and Langmuir equations. The removal rates of heavy metals were higher in the order of Pb>Cu>Cd>Zn, showing that the adsorption efficiency of Pb was higher than those of any other heavy metals. Freundlich and Langmuir adsorption isotherms were used to model the equilibrium adsorption data obtained for adsorption of heavy metals on biochar produced from sesame waste. Pb, Cu, Cd and Zn equilibrium adsorption data were fitted well to the two models, but Pb gave a better fit to Langmuir model. Heavy metals were observed on the biochar surface after adsorption by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). Main functional groups were aromatic C=O ring (at $1160cm^{-1}$, $1384cm^{-1}$ and $1621cm^{-1}$) by FT-IR analysis. Thus, biochar produced from sesame waste could be useful adsorbent for treating heavy metal wastewaters.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2002.08a
• /
• pp.54-63
• /
• 2002

Post-harvest technology for rice was focused on in-bin drying system, which consists of about 100, 000 facilities in 1980s. The modernized Rice Processing Complex (RPC) and Drying Storage Center (DSC) became popular for rice dry, storage, process and distribution from 1990s. However, the percentage of artificial drying for rice is 48% (2001) and the ability of bulk storage is about 15%. Therefore it is necessary to build enough drying and bulk storage facilities. The definition of high quality rice is to satisfy both good appearance and good taste. The index for good taste in rice is a below 7% of protein, 17-20% of amylose, 15.5-16.5% of moisture contents and high concentration of Mg and K. To obtain a high quality rice, it is absolutely needed to integrate high technologies including breeding program, cropping methods, harvesting time, drying, storing and processing methodologies. Generally, consumers prefer to rice retaining below b value of 5 in colorimetry, and the whiteness, the hardness and the moisture contents of rice are in order of consumer preference in rice quality. By selection of rice cultivars according to acceptable quality, the periods between harvesting time and drying reduced up to about 20 days. Therefore it is necessary to develop a low temperature grain drying system in order to (1) increase the rate of artificial rice drying up to 85%, (2) keep the drying temperature of below 45C, (3) maintain high quality in rice and (4) save energy consumption. Bulk storage facilities with low temperature storage system (7-15C) for rice using grain cooler should be built to reduce labor for handling and transportation and to keep a quality of rice. In the cooled rice, there is no loss of grain quality due to respiration, insect and microorganism, which results in high quality rice containing 16% of moisture contents all year round. In addition, introducing a low temperature milling system reduced the percentage of broken rice to 2% and increased the percentage of head rice to 3% because of proper hardness of grain. It has been noted that the broken rice and cracking reduced significantly by using low pressure milling and wet milling. Our mission for improving rice market competitiveness goes to (1) produce environment friendly, functional rice cultivars, (2) establish a grade standard of rice quality, (3) breed a new cultivar for consumer oriented and (4) extend the period of storage and shelf life of rice during postharvest.

• Korean Journal of Community Nutrition
• /
• v.19 no.2
• /
• pp.198-211
• /
• 2014

Objectives: To investigate the use frequency and amount of food sources of sodium and knowledge requirement, and job satisfaction with school food services according to the school types in Busan. Methods: A total of 98 schools were surveyed and knowledge requirement and job satisfaction were assessed using a questionnaire. In addition, the use frequency and amount of food sources of sodium for 10 school days were examined. Results: The response rate of the most difficult area among dietitians' tasks was significantly high in 'nutrition education and counseling' for elementary schools and 'hygiene management' for high schools (p < .05). The response rate of the factors to be considered in meal planning was significantly high in 'energy and nutrients requirement' for elementary schools and 'menu/taste preference of students' for middle and high schools (p < .05). The response rate of whether school food services affect health and eating habits of students or not was significant high in 'very helpful' for elementary schools (p < .001). The average sodium contents in the meals of elementary, middle and high schools was 1981.4 mg/meal/person/day, 1867.3 mg/meal/person/day and 1,329.9 mg/meal/person/day, respectively. For foods in highest sodium, Kimchi, Oribulgogi, and Kare rice were ranked 1st, 2nd and 3rd respectively. The main reason for not providing the fruits was 'price' among all groups. The knowledge requirement such as 'nutrition and menu management', 'nutrition education', and 'nutrition counseling' was significantly higher in elementary school compared with middle and high school (p < .001, p < .01, and p < .01 respectively). The dietitians and nutrition teachers of elementary schools have a higher job satisfaction compared with those of middle schools (p < .01). The job satisfaction was positively correlated with knowledge requirement of dietitians and nutrition teachers of elementary and middle schools. Conclusions: The results suggest that developing dietitians' education program about knowledge requirement contribute to increasing the school food service and job satisfaction in elementary and middle schools.

• Economic and Environmental Geology
• /
• v.50 no.3
• /
• pp.251-256
• /
• 2017

This study presents measures to enhance the efficiency of Successive Alkalinity Producing Systems(SAPS), a natural biological purification method that prevents environmental pollution arising from the release of Acid Mine Drainage(AMD) from abandoned mines into rivers and groundwater. The treatment of AMD using SAPS is based on biological processing technology that mostly involves sulfate reducing bacteria(SRB). It has been proven effective in real-world applications, and has been employed in various projects on the purification of AMD. However, seasonal decrease in temperature leads to a deterioration in the efficiency of the process because sulfate-reducing activity is almost non-existent during cold winters and early spring even if SRB is able to survive. Against this backdrop, this study presents measures to enhance the activity of the SRB of the organic layer by integrating light emitting diode(LED)s in SAPS and to maintain the active temperature using LEDs in cold winters. Given that mine drainage facilities are located in areas where power cannot be easily supplied, solar cell modules are proposed as the main power source for LEDs. By conducting further research based on the present study, it will be possible to enhance the efficiency of AMD treatment under extreme cold weather using solar energy and LEDs, which will serve as an environmentally-friendly solution in line with the era of green growth.

• Journal of Animal Science and Technology
• /
• v.49 no.4
• /
• pp.437-442
• /
• 2007

The melanocortin-4 receptor(MC4R) is virtually expressed in all brain regions and plays an important role in energy homeostasis in mammals. MC4R has been intensively studied as a trait gene controlling economically important traits, such as growth and feed conversion, etc. Six hundreds and sixty Duroc pigs were genotyped for the MC4R locus and analyzed their relationships with breeding values for average daily gain(ADG), backfat thickness(BF), days to 90kg(D90) and feed conversion(FC). The estimated genotype frequencies for the all Duroc pigs were: 30.8%, 45.2%, 24.1% for AA, AB and BB genotypes, respectively. The mutant A allele was significantly associated with ADG, D90 and BF whereas no significant relationship was found with FC. The change of gene frequencies by generation was shown in both selected and culled groups. These results indicate that the MC4R polymorphism could be integrated in the present selection program to realize a marker-assisted selection for the growth traits of the Duroc population.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.5
• /
• pp.425-431
• /
• 2020

Recent advancements in industries and technologies have resulted in an increase in the volume of transportation, management, and distribution of logistics. Radio-frequency identification (RFID) technologies have been developed to efficiently manage such a large amount of logistics information. The use of RFID for management is being applied not only to the logistics industry, but also to the power transmission and energy management field. However, due to the limitation of program development capacity, the RFID device is limited in development, and this limitation is vulnerable to security because the existing strong encryption method cannot be used. For this reason, we designed a chaotic system for security with simple operations that are easy to apply to such a restricted environment of RFID. The designed system is a two-dimensional tent map chaotic system. In order to solve the problem of a biased distribution of signals according to the parameters of the chaotic dynamical system, the system has a cryptographic parameter(𝜇₁), a distribution parameter(𝜇₂), and a parameter(𝜃), which is the constant point, ID value, that can be used as a key value. The designed RFID authentication system is similar to random numbers, and it has the characteristics of chaotic signals that can be reproduced with initial values. It can also solve the problem of a biased distribution of parameters, so it is deemed to be more effective than the existing encryption method using the chaotic system.

• The KIPS Transactions:PartA
• /
• v.16A no.2
• /
• pp.69-78
• /
• 2009

One of the most effective way to improve cache performance is to exploit both temporal and spatial locality given by any program executive characteristics. In this paper we present a high performance and low power cache structure with a bank selection mechanism that enhances exploitation of spatial and temporal locality. The proposed cache system consists of two parts, i.e., a main direct-mapped cache with a small block size and a fully associative buffer with a large block size as a multiple of the small block size. Especially, the main direct-mapped cache is constructed as two banks for low power consumption and stores a small block which is selected from fully associative buffer by the proposed bank selection algorithm. By using the bank selection algorithm and three state bits, We selectively extend the lifetime of those small blocks with high temporal locality by storing them in the main direct-mapped caches. This approach effectively reduces conflict misses and cache pollution at the same time. According to the simulation results, the average miss ratio, compared with the Victim and STAS caches with the same size, is improved by about 23% and 32% for Mibench applications respectively. The average memory access time is reduced by about 14% and 18% compared with the he victim and STAS caches respectively. It is also shown that energy consumption of the proposed cache is around 10% lower than other cache systems that we examine.

• Journal of the Korean Society of Radiology
• /
• v.4 no.2
• /
• pp.21-25
• /
• 2010

Recently, various semiconductor compounds as radiation detection material have been researched for a diagnostic x-ray detector application. In this paper, we have fabricated the CdS detecton sensor that has good photosensitivity and high x-ray absorption efficiency among other semiconductor compounds, and evaluated the application feasibility by investigating the detection properties about energy range of diagnostic x-ray generator. We have fabricated the line voltage selector(LCV) for a signal acquisition and quantities of CdS sensor, and designed the voltage detection circuit and rectifying circuit. Also, we have used a relative relation algorithm according to x-ray exposure condition, and fabricated the interface board with DAC controller. Performance evaluation was investigated by data processing using ANOVA program from voltage profile characteristics according to resistive change obtained by a tube voltage, tube current, and exposure time that is a exposure condition of x-ray generator. From experimental results, an error rates were reduced according to increasing of a tube voltage and tube current, and a good properties of 6%(at 90 kVp) and 0.4%(at 320 mA) ere showed. and coefficient of determination was 0.98 with relative relation of 1:1. The error rate according to x-ray exposure time showed exponential reduction because of delayed response velocity of CdS material, and the error rate has 2.3% at 320 msec. Finally, the error rate according to x-ray dose is below 10%, and a high relative relation was showed with coefficient of determination of 0.9898.

• Journal of Life Science
• /
• v.15 no.6 s.73
• /
• pp.968-971
• /
• 2005

The Melanocortin-4 receptor gene (MC4R) regulates the energy balance and the genetic basis of obesity. A polymorphism in the porcine melanocortin-4 receptor has previously shown to be associated with growth, fat deposition and feed intake. In this study, the polymorphism of the gene was studied in several pig breeds of Duroc, Landrace, Berkshire, and Yorkshire. The results showed that the frequencies of MC4R genotype varied among those breeds. Association analyses were also performed between the MC4R polymorphism and average daily gain, feed conversion ratio, backfat thickness and lean percentage phenotypes. The results strongly support that the MC4R polymorphism can be used DNA marker selection indicator for economically important traits for pig breeding program in Korea.