• Journal of Internet Computing and Services
• /
• v.14 no.2
• /
• pp.53-59
• /
• 2013

Harvesting energy from the environment is essential for many applications to slow down the deterioration of energy in sensor networks. Energy from the environment is an inexhaustible supply which, if properly managed and harvested from the sources, can allow the system to last for a longer period. Many simulators simulate whole sensor networks where the nodes rely on energy harvesting for their source of power. It is important to be able to assume and simulate a node that can harvest energy from different sources of ambient energy. It is also essential to be able to keep track of the energy levels of the node and adjust node activities based on its energy status. This study aims to develop a prototype for a single node simulator that will show the effects of harvesting from different sources of energy. The results of this study can later be extended for more complicated simulations.

• Nuclear Engineering and Technology
• /
• v.11 no.3
• /
• pp.203-212
• /
• 1979

The thermal decomposition of simulated Magnox highly active waste and of HARVEST feed slurries (SW and SG) which include tile glass forming chemicals has been studied. The waste and the slurries are almost completely calcined by 500-55$0^{\circ}C$. The colour of the solids from the slurries varies little until about 90$0^{\circ}C$ when it darkens considerably. The slurries begin to vitrify at this temperature and are completely vitrified at 1000-105$0^{\circ}C$. On the other hand. the sulphate impurity in SN slurry causes a yellow phase to separate above 75$0^{\circ}C$. The density of the intermediate solids is fairly low until 650$^{\circ}$-$700^{\circ}C$ is reached. This temperature seems to mark the onset of fluxing as tile density rises quickly to 2g/㎤ at 700$^{\circ}$ -80$0^{\circ}C$. The strengh of the solids decreases with temperature up to 50$0^{\circ}C$, and then rises as the solids begin to sinter. Below 50$0^{\circ}C$ the SN solids are the stronger. suggesting that the impurity renders this silica more reactive.

• Journal of Satellite, Information and Communications
• /
• v.11 no.2
• /
• pp.55-59
• /
• 2016

Conventional RF energy harvesting systems can harvest energy and decode information from same source as an Hybirid-AP (H-AP). However, harvesting efficiency is seriously dependent on distance between users and H-AP. Therefore, in this paper, we proposed a transmission model for RF harvesting consisting of information and power source separately called Decoupled RF Energy harvesting networks. Main purpose of this paper is to maximize energy efficiency under various constraints of transmit power from H-AP and power beacon (PB), minimum quality of service and quality of harvested power of each users. To measure proposed model's performance, we proposed optimal time scheduling algorithms for energy efficiency (EE) maximization using Lagrangian dual decomposition theory that locally maximizes the EE by obtaining suboptimal values of three arguments : transmit power of H-AP, transmit power of PB, frame splitting factor. Experiment results show that the proposed energy-efficient algorithms converge within a few iterations with its optimality and greatly improve the EE compared to that of baseline schemes.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.2
• /
• pp.225-231
• /
• 2009

The objective of this experiment was to study the effects of grass maturity at harvest on the nutritive value of grass silage (GS) in relation to voluntary intake, digestibility, nitrogen (N) utilization and in sacco dry matter (DM) degradability. Silage was cut from a sward dominated by orchardgrass (Dactylis glomerata L.) at the late-vegetative (early-cut), internode elongation (mediumcut) and flowering (late-cut) stages of growth. The DM yield at harvest was the lowest for early-cut silage (5.4 t/ha) and increased to 6.5 and 7.0 t/ha for the medium and late-cut silage respectively. As the crop matured, the crude protein (CP) concentration decreased significantly (p<0.05) and there was a marked increase in acid detergent fiber (ADF) concentration (p<0.001). The three different silages were offered to four 18-month old Charolais wether sheep to measure the voluntary intake, in vivo digestibility and N retention over four 21-day periods in an incomplete changeover design. Silage degradability characteristics were determined using four fistulated sheep to measure DM degradability over 3, 6, 12, 24, 48 and 72 h. There was a linear decrease in the voluntary intake of silage fresh matter, DM, organic matter (OM) and neutral detergent fiber (NDF), digestibility of DM, OM, NDF, ADF and CP, and digestibility of OM in DM (Dvalue) ($P_L<0.01$) as harvesting of grass was delayed. Nitrogen intake, N output in urine, N output in faeces and N balance also linearly decreased ($P_L<0.01$) with postponed harvesting of grass for silage. DM degradability and effective degradability (ED) significantly decreased with increasing maturity of grass at harvest. The results suggest that harvesting date has a significant influence on the nutritive value of GS in terms of intake, digestibility, N balance and in sacco degradability in the rumen. It was concluded that early harvest GS ensured higher intake, digestibility, N intake and DM degradability in comparison with the medium and the late cut GS as a result of improved rumen N efficiency and utilization probably due to a better balance of available energy and protein.

• Journal of IKEEE
• /
• v.16 no.3
• /
• pp.224-234
• /
• 2012

This paper describes an energy harvesting circuit using solar and vibration energy with MPPT(Maximum Power Point Tracking) control for micro sensor nodes. The designed circuit employs MPPT control to harvest maximum power available from a PZT vibration element and an integrated solar cell. The harvested energies are simultaneously combined and stored in a storage capacitor, and then managed and transferred into sensor node by PMU(Power Management Unit). MPPT controls are implemented using the linear relationship between the open-circuit voltage of an energy transducer and its MPP(Maximum Power Point) voltage. The proposed circuit is designed in a CMOS 0.18um technology and its functionality has been verified through extensive simulations. The designed energy harvesting circuit and integrated solar cell occupy $2.85mm^2$ and $8mm^2$ respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.3
• /
• pp.755-761
• /
• 2013

Medium access control (MAC) protocols for wireless sensor networks make sensor nodes on state for energy-efficiency only when necessary. In this paper we present an energy efficient priority-based MAC protocol for energy-harvesting Wireless Sensor Networks (WSNs). For support priority-based packet transmission the proposed EEPB-MAC protocol uses the modified IEEE 802.15.4 beacon frames including priority bit, sender node address, and NAV value fields. A receiver node periodically wakes up, receives sender beacon frames, selects data sending sender, and broadcasts a beacon frame containing the selected sender's address. A receiver node selects sender node according to sender's data priority. A receiver nodes also adjust wake up period based on their energy states. Hence, the energy consumption of receiver node can be minimized. Through simulations and analytical analysis, we evaluate the performance of our proposed the EEPB-MAC protocol and compare it against the previous MACs. Results have shown that our protocol outperforms other MAC in terms of energy consumption, higher priority packet delivery delay.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.2
• /
• pp.105-111
• /
• 2020

In this paper, we propose a scheme that minimizes the energy imbalance problem of solar-powered wireless sensor network (SP-WSN) using both a mobile sink capable of wireless power transfer and an efficient clustering scheme (including cluster head election). The proposed scheme charges the cluster head using wireless power transfer from a mobile sink and mitigates the energy hotspot of the nodes nearby the head. SP-WSNs can continuously harvest energy, alleviating the energy constraints of battery-based WSN. However, if a fixed sink is used, the energy imbalance problem, which is energy consumption rate of nodes located near the sink is relatively increased, cannot be solved. Thus, recent research approaches the energy imbalance problem by using a mobile sink in SP-WSN. Meanwhile, with the development of wireless power transmission technology, a mobile sink may play a role of energy charging through wireless power transmission as well as data gathering in a WSN. Simulation results demonstrate that increase the amount of collected data by the sink using the proposed scheme.

• Journal of IKEEE
• /
• v.18 no.1
• /
• pp.159-164
• /
• 2014

This paper targets the development of micro-converter such as a power converter for photovoltaic module. In corresponding to the poor performance of centralized PV system under partial shading, the power converter for single PV module to maximize the energy harvest from PV module. The power converter is constantly tracking the maximum power point of photovoltaic system and increases energy output power. To minimize the quantity of devices and switchs, 320W solar micro-converter is developed using synchronous rectifier. From the basis of these results, through simulations and experiments were verified efficiency.

• Journal of the Microelectronics and Packaging Society
• /
• v.20 no.4
• /
• pp.31-34
• /
• 2013

Based on the structural analysis of cantilever and the piezoelectric effect, we propose a new design of piezoelectric cantilever to harvest maximum vibration energy. Geometric parameters of piezoelectric cantilever are optimized according to two different types of cantilever structure. The main factors that affect the harvesting performance of the cantilever was the shape of the cantilever and the load at the free end. The amount of charge is affected by piezoelectric constant and mechanical strain of the cantilever.

• Membrane and Water Treatment
• /
• v.6 no.1
• /
• pp.53-75
• /
• 2015

This paper provides an overview of the role of membranes in bioelectrochemical systems (BESs). Bioelectrochemical systems harvest clean energy from waste organic sources by employing indigenous exoelectrogenic bacteria. This energy is extracted in the form of bioelectricity or valuable biofuels such as ethanol, methane, hydrogen, and hydrogen peroxide. Various types of membranes were applied in these systems, the most common membrane being the cation exchange membrane. In this paper, we discuss three major bioelectrochemical technology research areas namely microbial fuel cells (MFCs), microbial electrolysis cells (MECs) and microbial desalination cells (MDCs). The operation principles of these BESs, role of membranes in these systems and various factors that affect their performance and economics are discussed in detail. Among the three technologies, the MFCs may be functional with or without membranes as separators while the MECs and MDCs require membrane separators. The preliminary economic analysis shows that the capital and operational costs for BESs will significantly decrease in the future due mainly to differences in membrane costs. Currently, MECs appear to be cost-competitive and energy-yielding technology followed by MFCs. Future research endeavors should focus on maximizing the process benefits while simultaneously minimizing the membrane costs related to fouling, maintenance and replacement.