• KIEAE Journal
• /
• v.17 no.3
• /
• pp.59-67
• /
• 2017

Purpose: As we are facing the global crisis from the climate change and energy depletion, urgent actions are needed to design a integrated sustainable building. This paper suggests that a sustainable design awards can stimulate for architects to bring the cutting-edge ideas into a realized building in comparison to green building certification system. AIA COTE Top 10 design awards, organized and run by AIA(American Institute of Architects) COTE(Committee on the Environment) from 1997, is analyzed as a case study. By researching the core of the AIA COTE Top 10 design awards system in terms of evaluation measures and submission requirements, meaningful suggestions were drawn to supplement Korea Green Building Awards system and to design and realize leading green buildings in Korea. Method: The comparison between AIA COTE Top 10 and Korea Green Building Design Awards was made in terms of evaluation measures, submission requirements, and green building certification systems. Result: This paper finally suggests the following three points in conclusion: 1) Set the standards of evaluation measures reflecting the three aspects(economy, environment, social) of sustainability, 2) Set the qualitative evaluation measures and corresponding submission requirements that can apply in the design awards in comparison to green building certification system, 3) Develop and balance submission requirements in response to evaluation measures to proceed systematic evaluation of the green buildings.

• Journal of the Korean Dietetic Association
• /
• v.23 no.3
• /
• pp.223-239
• /
• 2017

This study was conducted to investigate the anthropometric data, serum profiles, nutrient intakes and diet quality of men in their 30s. The subjects were divided into a married group and an unmarried group. For the study, we obtained data for analysis from the combined 2008~2015 Korean National Health and Nutrition Examination Survey (KNHANES). Mean height and weight of study population were 173.5 cm, and 74.0 kg in the married group and 173.1 cm, and 73.6 kg in the unmarried group, respectively. Systolic blood pressure in the unmarried group was significantly higher than that of the married group (P<0.001), while circulating vitamin D levels in the married group were significantly higher than those of the unmarried group (P<0.001). The proportion of obesity in the two groups was 42.41% and 38.40%, respectively. In the unmarried group, prevalence of depression was significantly higher than that those of the married group. Intakes of energy, water, protein, fat, carbohydrate and calcium in the married group were significantly higher than those of the unmarried group. In both groups, water and fiber intakes were low and sodium intakes were extremely high based on the KDRIs (Dietary Reference Intakes for Koreans). The mean adequacy ratio (MAR) of the married group was higher than that of the unmarried group. The index of nutritional quality (INQ) in the married group was also higher than that of the unmarried group. Therefore, we propose development of dietary guidelines and education programs for improvement of food and nutrient intakes, nutrition balance and dietary quality of unmarried men in their 30s.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1003-1010
• /
• 2013

In this study, a simulation program was developed, which predicts the performance of cold-air forced circulation type air cooled showcase. The showcase has an excellent display effect in addition to preserving the grocery. In the program, the compressor was analyzed using performance data supplied by the manufacturer and the capillary tube pressure drop was analyzed using a homogeneous model. The evaporator and condenser were analyzed by dividing the heat exchangers into small elements, where energy balance and appropriate heat transfer correlations were used. A showcase model with two 3/4 HP compressors, capillary tubes of 1.6 mm inner diameter, a fin-and-tube evaporator and condenser was tested, and the results are compared with the predicted values. It is shown that both evaporation and condensation temperatures are adequately predicted by the program.

• Journal of Korean Society for Quality Management
• /
• v.44 no.1
• /
• pp.153-166
• /
• 2016

Purpose: Government quality assurance (QA) activities in Korea, which is carried out by the Defense Agency for Technology and Quality, is not effective due to 1) the obscureness of the QA implementation method, 2) the gap between QA activities of provisions and those conducted in the fields, and 3) the variation in subjective judgement among the QA personnel. The purpose of this paper is to propose some suggestions to enhance the effectiveness of government QA activities for military supplies in the production stage. Methods: QA activities for military supplies are investigated and problematic aspects are deduced for the production stage. To secure the effectiveness of the QA activities, Defense Contract Management Agency of the United Sates is benchmarked and five improvement methods are presented. Results: Five improvement aspects are 1) reflecting special terms and conditions of government mandatory inspection in contract, 2) classifying QA personnel, 3) making use of data collection and analysis template compulsory, 4) providing checklist for process review, and 5) establishing guidelines for sampling plans for product examination. Conclusion: Suggestions of this paper can lead to consistency and balance in government QA activities, reducing military suppliers' complaints and enhancing the effectiveness of QA effort, and ultimately contributing to the quality improvement of military supplies.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.1
• /
• pp.35-41
• /
• 2008

The radiative heat loss from a receiver of a dish solar collector is numerically investigated. The dish solar collector considered in this paper consists of a receiver and multi-faceted mirrors. In order to investigate the performance comparison of dish solar collectors, six different mirror arrays and four different receivers are considered. A parabolic- shaped perfect mirror of which diameter is 1.40 m is considered as the reference for the mirror arrays. The other mirror arrays which consist of twelve identical parabolic-shaped mirror facets of which diameter are 0.405 m are suggested for comparison. Their reflecting areas, which are 1.545 $m^{2}$, are the same. Four different receiver shapes are a conical, a dome, a cylindrical, and a unicorn type. The radiative properties of the mirror surfaces and the receiver surfaces may vary the thermal performance of the dish solar collector so that various surface properties are considered. In order to calculate the radiative heat loss in the receiver, two kinds of methods are used. The Net Radiation Method that is based on the radiation heat balance on the surface is used to calculate the radiation heat transfer rate from the inside surface of the receiver to the environment. The Monte-Carlo Method that is the statistical approach is adopted to predict the radiation heat transfer rate from the reflector to the receiver. The collector efficiency is defined as the results of the optical efficiency and the receiver efficiency. Based on the calculation, the unicorn type has the best performance in receiver shapes and the STAR has the best performance in mirror arrays except the perfect mirror.

• Plant Journal
• /
• v.13 no.4
• /
• pp.48-50
• /
• 2017

A program for analyzing the transient behaviors of industrial gas turbines was developed. Each component (compressor, combustor, turbine and ducts)of gas turbine is modeled as a fully module to enhance the expandability of the program. We used object-oriented programing for this purpose. The mass and energy balance equations are solved numerically by Multivariable Newton Raphson method. The characteristic maps for the compressor and turbine were used for predicting the performance of a gas turbine engine. Combustion in the combustor is assumed to be complete combustion. PID control is used to maintain constant rotational speed and turbine exhaust temperature by the control of the fuel flow rate and the changing of the compressor inlet guide vane angle at the same time. It was confirmed that stable control of the gas turbine was possible, even for a rapid load change.

• Structural Engineering and Mechanics
• /
• v.78 no.1
• /
• pp.87-102
• /
• 2021

Long span cross-rope suspension structure is an innovative structural system evolved from typical Cross-Rope Suspension (CRS) guyed tower, a type of supporting system with short span suspension cable supporting overhead power transmission lines. In mountainous areas, the span length of suspension cable was designed to be extended to hundreds or over one thousand meters, which is applicable for crossing deep valleys. Vortex Induced Vibration (VIV) of overhead power transmission lines was considered to be one of the major factors of its fatigue and service life. In this paper, VIV and its controlling by Stockbridge damper for long span CRS was discussed. Firstly, energy balance method and finite element method for assessing VIV of CRS were presented. An approach of establishing FE model of long span CRS structure with dampers was introduced. The effect of Stockbridge damper for overall vibration of CRS was compared in both theoretical and numerical approaches. Results indicated that vibration characteristics of conductor in long span CRS compared with traditional tower-line system. Secondly, analysis on long span CRS including Stockbridge damper showed additional dampers installed were essential for controlling maximum dynamic bending stresses of conductors at both ends. Moreover, factors, including configuration and mass of Stockbridge damper, span length of suspension cable and conductor and number of spans of conductor, were assessed for further discussion on VIV controlling of long span CRS.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.2
• /
• pp.82-89
• /
• 2021

This study proposes a DAB two-stage series structure with insulated bidirectional DC-DC converter for two-way power transfer between the renewable energy of high voltages (1 kV and above). The proposed circuit transforms the existing DAB converter into a two-stage series structure to reduce the pressure in the switch. The problem of power imbalance occurring in the design of the DAB converter second-stage series is improved by applying the cell balancing method circuit and the common mode coupled inductor using an external flying capacitor instead of reflecting the existing improvement measures, voltage balance control, and inductor current control. In addition, a no-load supercharging sequence is proposed in high voltages and high-speed switching by using the fixed duty output method. This study presents the analysis results through the structure of the proposed circuit, the principle of improving the power imbalance problem, and simulations. Prototypes were manufactured to meet the specifications of input/output voltage of 1700 V, maximum load of 65 kW, and switching frequency of 51kHz, and the validity of the topology was verified using the experimental results and efficiency data.

• Atmosphere
• /
• v.28 no.4
• /
• pp.427-441
• /
• 2018

This study examines the impact of the urban parameterization scheme and the land cover change on simulated near surface temperature using Unified Model (UM) over the Seoul metropolitan area. We perform four simulations by varying the land cover and the urban parameterization scheme, and then compare the model results with 46 AWS observation data from 2 to 9 August 2016. Four simulations were performed with different combination of two urban parameterization schemes and two land cover data. Two schemes are Best scheme and MORUSES (Met Office Reading Urban Surface Exchange Scheme) and two land cover data are IGBP (International Geosphere and Biosphere Programme) and EGIS (Environmental Geographic information service) land cover data. When land use data change from IGBP to EGIS, urban ratio over the study area increased by 15.9%. The results of the study showed that the higher change in urban fraction between IGBP and EGIS, the higher the improvement in temperature performance, and the higher the urban fraction, the higher the effect of improving temperature performance of the urban parameterization scheme. 1.5-m temperature increased rapidly during the early morning due to increase of sensible heat flux in EXP2 compared to CTL. The MORUSES with EGIS (EXP3) provided best agreement with observations and represents a reasonable option for simulating the near surface temperature of urban area.

• Atmosphere
• /
• v.31 no.2
• /
• pp.143-156
• /
• 2021

This study investigates the impacts of land cover change due to urbanization on the Urban Heat Island Intensity (UHII) and the Heat Index (HI) over the Seoul metropolitan area using the Unified Model (UM) with the Met Office Reading Urban Surface Exchange Scheme (MORUSES) during the heat wave from 16, July to 5, August 2018. Two simulations are performed with the late 1980s land-use (EXP1980) and the late 2000s land-use (EXP2000). EXP2000 is verified using Automatic Weather Station (AWS) data from 85 points in the study area, and observation sites are classified into two categories according to the urban fraction change over 20 years; Category A is 0.2 or less increase, and Category B is 0.2 or more increase. The 1.5-m temperature and relative humidity in Category B increase by up to 1.1℃ and decreased by 7% at 1900 LST and 2000 LST, respectively. This means that the effect of the urban fraction changes is higher at night. UHII increases by up to 0.3℃ in Category A and 1.3℃ in Category B at 1900 LST. Analysis of the surface energy balance shows that the heat store for a short time during the daytime and release at nighttime with upward sensible heat flux. As a result of the HI, there is no significant difference between the two experiments during the daytime, but it increases 1.6℃ in category B during the nighttime (2200 LST). The results indicate that the urbanization increase both UHII, and HI, but the times of maximum difference between EXP1980 and EXP2000 are different.