• Analytical Science and Technology
• /
• v.30 no.6
• /
• pp.405-410
• /
• 2017

High energetic materials (HEMs) have been used in fuels, civil engineering and architecture as well as military purposes such as explosives and propellants. The essential process for the development of new energetic compounds is to accurately calculate its detonation performances. The most typical equation for calculating the explosive performance is the Kamlet-Jacobs (K-J) equation. In the K-J equation, the parameter such as the number of moles of gaseous products at the explosion, the average molar mass of gas products, and the explosion heat greatly affect the explosion performance. These depend on the product composition for the detonation reaction. In this study, detonation products of 65 high energetic molecules (HEMs) were calculated from the various rules such as Kamlet-Jacobs, Kistiakowsky-Wilson, modified Kistiakowsky-Wilson, Springall-Roberts rules to calculate more accurate detonation velocity (Dv). In addition, they were applied to five kinds of detonation velocity equations proposed by K-J, Rothstein, Xiong, Stine and Keshavarz. The mean absolute error and root mean square error of HEMs were obtained from experimental and calculated velocity value for each method. The K-J and Xiong equation that is slightly complex showed a lower mean absolute error than the simple Rothstein and Keshavarz equation. When the mod-KW rule was applied to the Xiong equation, the detonation velocities were the most accurate. This study compared the various method of calculating the detonation velocity of HEMs to obtain accurate HEMs performance.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.1
• /
• pp.33-41
• /
• 2015

The kinetic analysis of energetic materials using Differential Scanning Calorimetry (DSC) is proposed. Friedman Isoconversional method is applied to DSC experiment data and AKTS software is used for analysis. The proposed kinetic scheme has considerable advantage over the standard method based on One-Dimenaionl Time to Explosion (ODTX). Reaction rate and product mass fraction simulation are conducted to validate extracted kinetic scheme. Also a slow cook-off simulation is implemented on $B/KNO_3$ for validating the applicability of the extracted kinetics scheme to a practical thermal experiment.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.5
• /
• pp.47-57
• /
• 2012

A modified ignition and growth(I&G) model which is necessary to simulate the combustion phenomena of energetic materials and an analytical model determining the unknown parameters of the reaction rate equation are proposed. The modified I&G model sustains important physical implications with overcoming some problems of previous rate equations. This rate model consists of ignition term which represents the formation of the hotspot due to void collapse and growth term which means the shock to detonation transition phenomena. Also, the theoretical model is used to investigate the combustion characteristics of certain energetic materials before running Hydrocode by pre-determination of unknown parameter, $b,\;G,\;x,\;I$. The analytical model provides efficient and highly accurate results rather than previous method which simulated the unconfined-rate-stick via the numerical means.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.331-341
• /
• 2012

A modified Ignition and Growth(I&G) model which is necessary to simulate the combustion phenomena of energetic materials and an analytical model determining the unknown parameters of the reaction rate equation are proposed. The modified I&G model sustains important physical implications with overcoming some problems of previous rate equations. This rate model consist of Ignition term which represent the formation of the hotspot due to void collapse and Growth term which means the shock to detonation transition phenomena. Also, the theoretical model is used to investigate the combustion characteristics of certain energetic materials before running Hydrocode by pre-determination of unknown parameter, b, G, x, I. The analytical model provides efficient and highly accurate results rather than previous method which simulated the unconfined-rate-stick via the numerical means.

• Journal of the Korean Society of Visualization
• /
• v.19 no.1
• /
• pp.28-35
• /
• 2021

In this study, an image processing method for the measurement of two-phase bubbly flow is developed. Shadowgraphy images obtained by high-speed camera are used for analysis. Some bubbles are generated as single unit and others are overlapped or clustered. Single bubbles can be easily analyzed using parameters such as bubble shape, centroid, and area. But overlapped bubbles are difficult to transform clustered bubbles into segmented bubbles. Several approaches were proposed for the bubble segmentation such as Hough transform, connection point method and watershed. These methods are not enough for bubble segmentation. In order to obtain the size distribution of bubbles, we present a method of splitting overlapping bubbles using watershed and approximating them to ellipse. There is only 5% error difference between manual and automatic analysis. Furthermore, the error can be reduced down to 1.2% when a correction factor is used. The ellipse fitting algorithm developed in this study can be used to measure bubble parameters accurately by reflecting the shape of the bubbles.

• Women's Health Nursing
• /
• v.13 no.3
• /
• pp.174-183
• /
• 2007

Purpose: The purpose of this study was to explore the process of cultivating energy in middle-aged women doing Dan Jeon Breathing and to develop a grounded theory of Dan Jeon Breathing. Method: Data was collected by means of an in-depth interview using tape- recordings from 15 participants who practice Dan Jeon Breathing. The data was analyzed using the grounded theory method proposed by Strauss and Corbin(1998). Results: The core category was identified as "cultivating energy of the mind and the body together". The process of this could be further divided into 4 stages: the stages are cessation of an 'energetic life', 'depending on Dan Jeon Breathing', 'going through a difficult practice process' and 'getting used to Dan Jeon Breathing'. The participants began Dan Jeon Breathing because they were unable to retain their energetic lifestyle. They were dependent on Dan Jeon Breathing for recovery of health. Also, they were going through a difficult process. Finally, they entirely approved of Dan Jeon Breathing as a method of health promotion. Conclusion: This study provided the understanding needed for the training process of Dan Jeon Breathing. Therefore, women can pursue Dan Jeon Breathing for their health.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.299-302
• /
• 2006

We present an innovative means of numerically treating interfaces associated with chemically active energetic materials. Recent advances in wave tracking technique based on the Ghost Fluid Concept is extended to handle multi-material multi-phase interfaces associated with chemical environment associated with explosion. We show several work-in-progress applications of our code, including the impact problems involving both energetic and inert elements. Accurate modeling of the equation of state and the constitutive relations are also discussed

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.05a
• /
• pp.15-19
• /
• 2006

A pulsed laser ablation deposition (PLAD) technique is an excellent method for the fabrication of amorphous carbon (a-C) films, because it can generate highly energetic carbon clusters on a substrate. This paper was focused on the understanding and analysis of the motion of C particles in laser ablation assisted by Ar plasmas. The simulation has carried out under the pressure P=50 mTorr of Ar plasmas. Two-dimensional hybrid model consisting of fluid and Monte-Carlo models was developed and three kinds of the ablated particles which are carbon atom (C), ion ($C^+$) and electron were considered in the calculation of particle method. The motions of energetic $C^+$ and C deposited upon the substrate were investigated and compared. The interactions between the ablated particles and Ar gas plasmas were discussed.

• Journal of the Korean Chemical Society
• /
• v.40 no.1
• /
• pp.11-19
• /
• 1996

The cationic polymerization of energetic substituted oxetanes which have pendant energetic group such as azido and nitrato are investigated theoretically, using semiempirical HF/3-21G, MINDO/3, MNDO and AM1 method. The stereo- and electronic structure of binary molecular complex composed of energetic substituted oxetane and boron trifluoride can be explain by molecular orbital theory. The reactivity of propagation in the copolymerization of oxetanes can be presented by the positive charge on carbon(C2) atom of oxetane and energy level of the lowest unoccupied molecular orbital(LUMO) of propagating species of oxetanes. The reactivity ratios for copolymerization of oxetanes are a random copolymer-zation which is agree with MO calculated and experimental results. The relative equlibrium concentration of cyclic oxonium and open carbenium ions is found to be a major determinant of mechanism, owing to the rapid equilibrium of these cation forms and the expectation based on calculation that in the prepolymer propagation step, SN1 mechanism will be at least as fast as that for SN2 mechanism.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2002.05a
• /
• pp.46-46
• /
• 2002

It is well known that thin film growth and surface morphology can be substantially modified by ion-bombardment during the deposition. This is particularly important in case of thin-film deposition at low temperatures where the film growth occurs under highly nonequilibrium conditions. An attractive way to promote crystalline growth and surface morphology is deposition of additional energy in to the surface of the growing film by bombardment with hyperthermal particles. We were deposited crystalline Ti and TiN thin films on Si substrate by magnetron sputtering method with grid. Its thin films were highly smoothed and dense as increasing grid bias. In order explore the benefits of a bombardment of the growing film with high energetic particles. Ti and TiN films were deposited on Si substrates by an unbalanced magnetron sputter source with attached grid assembly for energetic ion extraction. Also, we have studied the variation of the plasma states by Langmuir probe and Optical Emission Spectroscopy (OES). The epitaxial orientation. microstructual characteristics. electrical and surface properties of the films were analyzed by XRD. SEM. Four point probe and AFM.