• 한국정보통신학회논문지
• /
• 제11권3호
• /
• pp.486-490
• /
• 2007

최근 애드혹 네트워크(Ad hoc Networks) 상에서 위치 정보를 이용한 라우팅 알고리즘에 관한 연구가 비교적 활발히 이뤄지고 있다. 본 논문에서는 위치 정보를 이용한 여러 가지 라우팅 알고리즘 중에서 널리 알려진 Location Aided Routing (LAR) 알고리즘의 성능을 개선하기 위한 방안을 제시한다. 제안된 방안에서는 라우팅 메시지가 브로드캐스팅되는 플러딩 영역을 줄이기 위한 방법으로서 LAR 알고리즘과 관련된 2가지 기본 schemes의 결합과 함께 accessible zone (근접영역)의 개념을 적용하였다. 제안된 새로운 알고리즘을 통하여 플러 딩 영역을 근접영역으로 제한함으로써 효율성 제고와 함께 라우팅 시간 단축이 가능함을 컴퓨터 시뮬레이션을 통하여 보였다.

• ETRI Journal
• /
• 제43권3호
• /
• pp.447-458
• /
• 2021

The quality of experience (QoE) of video streaming is degraded by playback interruptions, which can be mitigated by the playout buffers of end users. To analyze the impact of playout buffer dynamics on the QoE of wireless adaptive hypertext transfer protocol (HTTP) progressive video, we model the playout buffer as a G/D/1 queue with an arbitrary packet arrival rate and deterministic service time. Because all video packets within a block must be available in the playout buffer before that block is decoded, playback interruption can occur even when the playout buffer is non-empty. We analyze the queue length evolution of the playout buffer using diffusion approximation. Closed-form expressions for user-perceived video quality are derived in terms of the buffering delay, playback duration, and interruption probability for an infinite buffer size, the packet loss probability and re-buffering probability for a finite buffer size. Simulation results verify our theoretical analysis and reveal that the impact of playout buffer dynamics on QoE is content dependent, which can contribute to the design of QoE-driven wireless adaptive HTTP progressive video management.

• 한국항해항만학회지
• /
• 제40권6호
• /
• pp.385-390
• /
• 2016

eLoran은 측위, 항법, 시각 분야에서 요구 정확도에 따라 GPS의 대체 또는 백업시스템으로 사용될 수 있다. eLoran 송신국들은 UTC에 동기 되어 있으므로 TOA를 근거로 한 all-in-view 수신이 가능하여 높은 정확도의 시각 동기와 항법이 가능하다. 또한 LDC를 통해 송신국 및 dLoran 보정 정보 등을 방송함으로써 향상된 PNT를 제공한다. 본 논문에서는 eLoran을 이용한 정밀 시각비교 측정에 필수적인 eLoran 타이밍 수신기의 지연 시간에 관련된 것들을 측정하여 보정값으로 반영하는 기술을 제시하였다. 송신기 종단의 전류 결합기로부터 로란 신호를 추출하여 3 번째 사이클과 교차하는 지점에서 펄스를 생성하는 장치를 구성하고 그 펄스를 기준으로 지연 시간을 측정하는 장치를 구현하였다. 수신기 지연은 상용 eLoran 수신기와 능동형 자기장, 전기장 안테나와 수동형 루프 안테나를 사용하여 각각의 안테나를 연결하였을 때의 지연시간을 측정하였다. 이와 같은 방법으로 교정된 eLoran 타이밍 수신기를 공통시계 비교법에 이용하면 GNSS 이용 시각비교의 백업 시스템으로서 정밀한 시각비교가 필요한 분야에 활용할 수 있다.

• Composites Research
• /
• 제13권1호
• /
• pp.89-97
• /
• 2000

광섬유센서를 이용한 복합적층판의 피로손상 감지 및 진동측정, 그리고 스틸 보에 대한 충격위치 검출에 관한 연구가 수행되었다. 피로과정중의 신호는 복합재료 내에 삽입된 광섬유와 표면에 부착한 광강도형 광섬유센서, 그리고 스트레인게이지로부터 동시에 측정되었다. 진동감지 실험은 복합재료 보의 표면에 광섬유센서를 부착하여 자유진동 및 강제진동 신호를 취득하였다. 충격위치 검출에 관한 실험에서 충격위치는 충격에 의해 발생된 구조물의 진동이 두 센서에 도달하는 시간의 차를 이용하여 구할 수 있다. 광강도형 광섬유센서를 이용하여 반복 피로 신호를 잘 취득할 수 있었으며 스트레인게이지에 비하여 피로저항성이 우수함이 확인되었다. 광섬유센서는 갭센서와 동일하게 진동신호를 감지하였고 구조물에 가해진 충격위치를 비교적 정확히 검출할 수 있었다.

• 대한화학회지
• /
• 제45권2호
• /
• pp.111-115
• /
• 2001

NH$_3$-NO-Ar 혼합기체의 점화 과정을 반사 충격파를 이용하여 1675-2391 K 온도 범위에서 고찰하였다. 점화지연시간은 충격관 끝에서 1.0cm떨어진 곳에서 압력 변화 및 OH 라디칼의 광 방출을 측정하여 구하였으며, 점화지연시간에 대한 각 기체의 농도 및 온도 의존도에 관한 관계식을 구할 수 있었다. 그리고 NH$_3$-NO-Ar 혼합기체의 점화 과정에서 중요한 역할을 하는 단일단계반응들을 살펴보기 위해 기존에 제안된 다양한 반응 메카니즘들을 이용한 모의실험을 수행하였다. 또한 민감도 분석 등을 통해 NH$_2$+NO${\rightarrow}$NNH+OH 반응이 점화과정에서 가장 중요한 반응임을 알았다.

• Nutrition Research and Practice
• /
• 제7권3호
• /
• pp.178-184
• /
• 2013

This study investigates the impact of exercises, coffee intakes, and physical trainings on fuel utilization in rats. Ninety-six rats were fed a control diet with either water (C) or coffee (CF; 0.12 g freeze-dried instant coffee/100 g body weight/d). Additionally, the animals go through physical training (TC and TCF) or no training (NTC and NTCF) for 4 weeks. For physical training, animals have to exercise on treadmills for 30 minutes (5 d per week, $15^{\circ}$ incline, 0.5-0.8 km/h). At the end of week 4, the animals in each group were subdivided into three exercise groups: before exercise (BE), during exercise (DE), and after exercise (AE). The DE rats exercised on treadmills for 1 hour immediately before being sacrificed. Hemoglobin, hematocrit, glucose, glycogen, protein, triglyceride (TG), and free fatty acid (FFA) levels in the plasma, liver, and skeletal muscle of the rats were compared accordingly. Organ weights were also measured. Coffee-training interaction had a significant impact on heart weight, visceral fat, hemoglobin, hematocrit, liver glycogen in DE and AE, and liver triglyceride in DE and AE. Exercise (meaning exercised on a treadmill for 1 hour immediately before being sacrificed) training interaction was significant in liver glycogen, muscle glycogen in control diet and control diet with coffee, FFA and muscle TG levels at control diet with coffee group. Exercise-coffee interactions significantly influenced the FFA with no training groups. Exercise-coffee-training interaction significantly effects on FFA, Liver TG and Muscle TG. Coffee intakes can increase lipolysis during exercising but coffee consumptions delay the recovery of liver glycogen levels in trained rats after exercising. Coffee intakes can increase lipolysis during exercising but coffee consumptions delay the recovery of liver glycogen levels in trained rats after exercising. Coffee can be an effective ergogenic aid during exercise for physically trained rats.

• 한국자동차공학회논문집
• /
• 제13권5호
• /
• pp.19-28
• /
• 2005

It is of great economic importance to minimize the cylinder wear and the consumption rate of cylinder oil in a large two-stroke diesel engine. The motor-driven cylinder lubricator was first developed fur a large two-stroke marine diesel engine made in $W{\ddot{a}}rtsil{\ddot{a}}a$ Switzerland Ltd. by the joint research of industry-university. In this study, the effects of revolution speed, plunger stroke and cylinder back pressure on maximum discharge and delivery pressures, delivery delay duration, and oil feed rate are experimentally investigated by the home-manufactured cylinder lubricator. The maximum discharge pressure with a spot of 0.03 m and the maximum loss pressure at spots of 5, 6.78 and i 0 m away from the end of lubricator slot are increased as plunger stroke, revolution speed and back pressure are elevated, and the delivery delay duration is shortened as plunger stroke, revolution speed and oil pipe length are increased. Also, oil feed rate is increased as plunger stroke and revolution speed are raised, but lowered as the back pressure is increased.

• Geomechanics and Engineering
• /
• 제22권2호
• /
• pp.187-196
• /
• 2020

The changeable stress environment directly affect the propagation law of a stress wave. Stress wave propagation tests in sandstone with different axial stresses were carried using a modified split Hopkinson Pressure bar (SHPB) assuming the sandstone has a uniform pore distribution. Then the waveform and stress wave energy dissipation were analyzed. The results show that the stress wave exhibits the double peak phenomenon. With increasing axial stress, the intensity difference decreases exponentially and experiences first a dramatic decrease and then gentle development. The demarcation stress is σ/σ_c=30%, indicating that the closer to the incident end, the faster the intensity difference attenuates. Under the same axial stress, the intensity difference decreases linearly with propagation distance and its attenuation intensity factor displays a quadratic function with axial stress. With increasing propagation distance, the time difference decays linearly and its delay coefficient reflects the damage degree. The stress wave energy attenuates exponentially with propagation distance, and the relations between attenuation rate, attenuation coefficient and axial stress can be represented by the quadratic function.

• 한국정밀공학회지
• /
• 제22권4호
• /
• pp.144-150
• /
• 2005

Gas-assisted injection molding (GAIM) process is reducing the injection pressure during mold filling required as well as the shrinkage and warpage of the part and cycle time. Despite of these advantages, this process introduces new parameters and makes the application more difficult because the process interacts between gas and melt during injection molding process. Important GAIM factors that involved in this process include gas penetration design, locations of gas injection points, shot size, gas injection delay time as well as common injection molding parameters, gas pressure and gas injection time. In this study, the experiments were conducted to investigate effects of GAIM process variables on the gas penetration for PP and ABS moldings by changing gas injection point. Taguchi method was used fer the design of experiment. When the gas was injected at cavity's center, the most effective factor was shot size. When the gas was injected at cavity's end, the most effective factor was melt temperature. Injection speed was also an effective factor in GAIM process.

• 원예과학기술지
• /
• 제29권6호
• /
• pp.583-591
• /
• 2011

'Formosa' plums were picked at three maturity stages according to skin redness, treated with $1{\mu}L{\cdot}L^{-1}$ 1-MCP at $10^{\circ}C$ for 24 h and then stored for 21 days at $10^{\circ}C$. Ethylene production, respiration rate, firmness, color, TSS, TA, and ethanol concentration were determined. Total phenolic content, total flavonoid content, and antioxidant capacity were determined periodically by separating the flesh from the peel. Ethylene production and respiration rate were strongly inhibited in all stages of the 1-MCP-treated fruit, while ethylene production dramatically increased in all stages of non-treated fruit until 11 days after harvest, after which it decreased until the end of the experiment. The respiration rate of the stored fruit increased for 11 days in stages 1 and 2 and for 7 days in stage 3 and decreased after. 1-MCP-treated fruit in all stages showed delay in fruit quality changes such as firmness, TA, skin color, and ethanol concentration, but non-treated fruit did not. Total phenolic contents, total flavonoid contents and antioxidant capacity of 'Formosa' plums were not affected by 1-MCP treatment or maturity stage. However, those values were higher in the peel than in the flesh.