• Journal of Venture Innovation
• /
• v.5 no.2
• /
• pp.85-99
• /
• 2022

Dryers becoming commercially available for experimental and industrial use are classified to general drying oven, hot-air dryer, vacuum dryer, freezing dryer, etc. and kinds of them are various from the function, size and volume, etc. But the moisture measurement is not applied although it is important factor for the quality control and the performance improvement of products, and then now is very passive because the weight is weighed arbitrarily after dry-end. Generally the method for measuring moisture is divided by a direct measurement method and a indirect measurement method, and the former such as the change of weight or volume on the front and rear of separation of moisture, etc. is mainly used. Relatively a indirect measurement is very limited to apply due to utilize measurement apparatuses using temperature conductivity and micro-wave etc. In this research, we easily designed the moisture measurement system using the open-source based Arduino, and monitored moisture fluctuations and weight profiles in the real-time without the effect of external environment. Concretely the temperature-humidity and load cell sensors were packaged into a drying oven and the various change values were measured, and their sensors capable to operate 60℃ and 80℃ were selected to suitable for the moisture sensitive materials and the food dry. And also the performance safety using the organic samples of banana, pear, sawdust could be secured because the changes of evaporation rate as the dry time and temperature, and the measurement values of load cell appeared stable response characteristics through repeated experiments. Hereafter we judge that the reliability can be improved increasingly through the expansion of temperature-humidity range and the comparative analysis with CFD(Computational Fluid Dynamics) program.

• Journal of Venture Innovation
• /
• v.6 no.1
• /
• pp.1-16
• /
• 2023

Due to the progress of the 4th industrial revolution and the COVID-19 pandemic, the subscription economy was rapidly expanding. In particular, the subscription economy was expected to expand further as the servicing of products(servitization) rapidly progresses. In this study, we tried to empirically analyze the factors that promote and hinder the spread of the subscription economy from the consumer's point of view. To this end, based on the Service Profit Chain (SPC) model, which identified mechanisms leading from quality to satisfaction, loyalty, and performance, a research model was established by combining the framework of the Value-based Adoption Model (VAM), which covers both benefit and sacrifice factors. Usefulness and convenience were derived as benefit factors, and perceived risks and perceived costs were derived as sacrifice factors. The effects of these factors on satisfaction and continuous use intention were analyzed. For empirical analysis, a survey was conducted targeting people who have experience in subscription economy, and 300 effective samples were analyzed. The analysis was performed as a structural equation model using AMOS 24. As a result of the empirical study, it was found that convenience had a significant positive (+) effect on satisfaction. Perceived risk and perceived cost were analyzed to have a negative (-) effect on satisfaction. On the other hand, usefulness was found to have no significant effect on satisfaction. The influences affecting satisfaction were in the order of perceived cost, convenience, and perceived risk. Satisfaction was found to have a significant positive (+) effect on continuous use intention. The results of this study were considered meaningful in that they broadened the horizons of research by combining existing validated models at the academic level and testing their validity, and found that perceived cost was still an important factor at the practical level.

• Animal Bioscience
• /
• v.36 no.12
• /
• pp.1831-1841
• /
• 2023

Objective: This study was realized to evaluate the effects of supplementation with blends of water and fat-soluble vitamins on animal performance and carcass traits of young Nellore bulls. Methods: Forty-three Nellore bulls, with an initial weight of 261±27.3 kg and a mean age of 8±1.0 months, were used. Five animals were slaughtered at the beginning of the experiment (reference group), to determine the initial empty body weight of the bulls that remained in the experiment. The remaining 38 bulls were fed ad libitum and distributed in a completely randomized design in a 2×2 factorial scheme, with or without supplementation of water-soluble (B-blend+ or B-blend-) and fat-soluble (ADE+ or ADE-) vitamin blends. Diets were isonitrogenous (120 g of crude protein/kg dry matter [DM] of total mixed ration) and consisted of a roughage:concentrate rate of 30:70 based on total DM of diet. The experiment lasted 170 days, with 30 days of adaptation and 140 days for data collection. At the beginning and end of the experimental period, the bulls were weighed to determine the average daily gain. To estimate the apparent digestibility of nutrients and microbial efficiency, spot collections of feces and urine were performed for five consecutive days. Results: DM, ashes, organic matter, crude protein, ethereal extract, neutral detergent fiber corrected for residual ash and residual nitrogenous, and N intake and apparent digestibility were not influenced by vitamin supplementation, but total digestible nutrients intake and non-fibrous carbohydrates digestibility were influenced by B complex vitamin supplementation. Nitrogen balance, microbial efficiency, and performance data were not influenced (p>0.05) by vitamin supplementation. Conclusion: Vitamin supplementation (a blend of water-soluble and fat-soluble vitamins or their combinations) does not influence the animal performance and carcass traits of young Nellore bulls.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.17 no.6
• /
• pp.115-125
• /
• 2022

As the digital economy has emerged as a means of building a new business order and creating new values, the number of small business owners participating in digital platforms is gradually increasing. This study aims to check whether small business owners participating in the digital platform are being helped to properly respond to the market environment and establish and implement strategies necessary for growth through learning within the platform. To this end, this study attempted to examine the effect of the absorptive capacity of small business owners using e-commerce platforms on market orientation and the moderating effect of vicarious learning and experiential learning, which are two types of learning within the platform. As a result of verifying the hypothesis through the survey, it was found that the absorption capacity of small business owners using digital platforms positively affected their market orientation. In addition, as a result of the moderating effect analysis, it was found that vicarious learning within the platform strengthens the relationship between absorptive capacity and market orientation. This result implies that small business owners can not only prepare for market uncertainties through indirect learning (vicarious learning) but also establish strategies to provide products and services that meet the market's needs. On the other hand, the effect of experiential learning was found to lower market orientation, which means that previous business experiences can rather lower attention to the environment. The significance and implications of the study were presented.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.17 no.6
• /
• pp.71-88
• /
• 2022

The purpose of this study is to develop the competencies to help micro entrepreneurs who have experienced failure to successfully re-challenge. To this end, relevant literature published from 1977 to 2022 was analyzed, behavioral event interviews (BEI) were conducted with 7 successful micro entrepreneurs, and focus group interviews (FGI) were conducted three times by inviting competency development and HRD experts. Based on these research activities, the draft about competencies for micro entrepreneurs who had have failure was derived. And then inviting 12 experts in related field for Delphi Analysis, the final competency model that helps micro entrepreneurs successfully recover were developed as follows : Competency Groups(small business owners, recovery from failure), 8 detailed competencies(seize business opportunities, business planning, business differentiation, operation management, market exploration, research and development of products and services, positive self-regulation, overcoming and coping with failure experiences), 22 competency factors, and 72 behavioral indicators. This study has an academic significance in that it developed the competencies required for micro entrepreneurs recovering from failure. In addition, the results of this study can be used to develop a competency-based education program for micro entrepreneurs and to select suitable candidates for support programs.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.30 no.1
• /
• pp.1-14
• /
• 2024

As awareness of environmental issues continues to grow, there is an escalating demand for recycling and repurposing byproducts of agricultural and food production processes and their conversion to high-value products. Coffee is the most widely consumed beverage globally; during coffee beverage processing and consumption, byproducts such as coffee silverskin (CS), spent coffee grounds (SCGs), and oil are generated. Despite containing beneficial materials such as cellulose, hemicellulose, lignin, lipids, and bioactive substances, these byproducts are typically discarded in landfills or incinerated. The utilization of CS, SCGs, and oil in the development of packaging materials holds significant potentials toward the realization of a sustainable society. To this end, considerable research efforts have been dedicated to the development of high-value materials derived from coffee byproducts, including functional fillers, polymer composites, and biodegradable polymers. Notably, CS and SCGs have been employed as functional fillers in polymer composites. Additionally, lipids extracted from SCGs have been used as plasticizers for polymers and cultured with microorganisms to produce biodegradable polymers. This review focuses on the research and development of polymer/CS and polymer/SCG composites as well as cellulose extraction and utilization from CS and SCGs and its applications, oil extraction from SCGs, and cultivation with microorganisms using extracted oil for polyhydroxyalkanoates(PHA) production.

• Information Systems Review
• /
• v.22 no.1
• /
• pp.17-31
• /
• 2020

With the start of the fourth industrial revolution era, technologies of various fields are merged and new types of technologies and products are being developed. In addition, the importance of the registration of intellectual property rights and patent registration to gain market dominance of them is increasing in oversea as well as in domestic. Accordingly, the number of patents to be processed per examiner is increasing every year, so time and cost for prior art research are increasing. Therefore, a number of researches have been carried out to reduce examination time and cost for patent-pending technology. This paper proposes a method to calculate the degree of similarity among patent documents of the same priority claim when a plurality of patent rights priority claims are filed and to provide them to the examiner and the patent applicant. To this end, we preprocessed the data of the existing irregular patent documents, used Word2vec to obtain similarity between patent documents, and then proposed recommendation model that recommends a similar patent document in descending order of score. This makes it possible to promptly refer to the examination history of patent documents judged to be similar at the time of examination by the examiner, thereby reducing the burden of work and enabling efficient search in the applicant's prior art research. We expect it will contribute greatly.

• Journal of Microbiology and Biotechnology
• /
• v.34 no.2
• /
• pp.457-466
• /
• 2024

Cellobiose dehydrogenases (CDHs) are a group of enzymes belonging to the hemoflavoenzyme group, which are mostly found in fungi. They play an important role in the production of acid sugar. In this research, CDH annotated from the actinobacterium Cellulomonas palmilytica EW123 (CpCDH) was cloned and characterized. The CpCDH exhibited a domain architecture resembling class-I CDH found in Basidiomycota. The cytochrome c and flavin-containing dehydrogenase domains in CpCDH showed an extra-long evolutionary distance compared to fungal CDH. The amino acid sequence of CpCDH revealed conservative catalytic amino acids and a distinct flavin adenine dinucleotide region specific to CDH, setting it apart from closely related sequences. The physicochemical properties of CpCDH displayed optimal pH conditions similar to those of CDHs but differed in terms of optimal temperature. The CpCDH displayed excellent enzymatic activity at low temperatures (below 30℃), unlike other CDHs. Moreover, CpCDH showed the highest substrate specificity for disaccharides such as cellobiose and lactose, which contain a glucose molecule at the non-reducing end. The catalytic efficiency of CpCDH for cellobiose and lactose were 2.05 × 10⁵ and 9.06 × 10⁴ (M^-1 s^-1), respectively. The result from the Fourier-transform infrared spectroscopy (FT-IR) spectra confirmed the presence of cellobionic and lactobionic acids as the oxidative products of CpCDH. This study establishes CpCDH as a novel and attractive bacterial CDH, representing the first report of its kind in the Cellulomonas genus.

• Journal of Environmental Impact Assessment
• /
• v.4 no.3
• /
• pp.41-48
• /
• 1995

In former times the protection of our environment didn't play an important role due to the fact that emissions and effluents were not considered as serious impacts. However, opinions and scientific measurements meanwhile confirmed that the impacts are more serious than expected. Thus measures to protect our earth has to be taken into consideration. A part of these measures in the Environmental Impact Assessment (EIA). One of the most important parts of the EIA is the collection of basic datas and the following evaluation. Experience out of the daily business of Gerling Consulting Group shows that the content of the EIA has to be revised and enlarged in certain fields. The historical development demonstrated that in areas in which the population and the industrial activities reached high concentration there is a high necessity to develop strict environmental laws and regulations. Maximum values of the concentration of hazardous materials were fixed concerning the emission into and water. Companies not following these regulations were punished. The total amount of environmental offences increased rapidly during the last decade, at least in Germany. During this development the public consciousness concerning environmental affairs increased as well in the industrialized countries. But it could clearly be seen that the development in the field of environmental protection went into the wrong direction. The technologies to protect the environment became more and more sophisticated and terms as: "state of the art" guided more and more to lower emissions, Filtertechnologies and wastewater treatment for example reached a high technical level-but all these sophisticated technologies has one and the same characteristic: they were end-of-the pipe solutions. A second effect was that this kind of environmental protection costs a lot of money. High investments are necessary to reduce the dust emission by another ppm! Could this be the correct way? In Germany the discussion started that the environmental laws reduce the attractivity to invest or to enlarge existing investments within the country. Other countries seem to be not so strict with controlling the environmental laws which means it's simply cheaper to produce in Portugal or Greece. Everybody however knows that this is not the correct way and does not solve the environmental problems. Meanwhile the general picture changes a little bit and we think it changes into the correct direction "End-of-the-pipe" solutions are still necessary but this word received a real negative touch and nobody wants to be brought into connection with this word received a real negative touch and nobody wants to be brought into connection with this word especially in connection with environmental management and safety. Modern actual environmental management starts in a different way. Thoughts about emissions start in the very beginning of the production, they start with the design of the product and modification of traditional modes of production. Basis of these ideas are detailed analyses of products and processes. Due to the above mentioned facts that the public environmental consciousness changed dramatically a continous environmental improvement of each single production plant has to be guarantied. This question is already an important question of the EIA. But it was never really checked in a wholistic approach. Environmental risks have to be taken into considerations during the execution of an EIA. This means that the environmental risks have to be reduced down to a capable risk-level. Environmental risks have to be considered within the phase of planning, during the operation of a plant and after shut down. The experience shows that most of the environmental relevant accidents were and caused by human fault. Even in highly protected plants the human risk-factor can not be excluded during evaluation of the risk-potential. Thus the approach of an EIA has to regard technical evaluations as well as organizational thoughts and the human factor. An environmental risk is a threat to the environment. An analysis of the risk concerning the organizational and human aspect however never was properly executed during an EIA. A possible solution could be to use an instrument as the actual EMAS (Environmental Management System) of the EC for more accurate evaluation of the impact to the environment during an EIA. Organizations or investors could demonstrate by an approved EMAS or even by showing their installment of EMAS that not only the technical level of the planned investment meets the requested standards but as well the actual or planned management is able to reduce the environmental impact down to a bearable level.

• Korean Journal of Food Science and Technology
• /
• v.30 no.2
• /
• pp.419-424
• /
• 1998

Removal of monochloropropanediol (MCPD) and improvement of quality of the soy-sauce made from acid-hydrolyzate of defatted soy protein (SAHSP) were examined by fermenting the soy-sauce with soy-sauce koji or koji plus Pediococcus soya or/and Saccharomyces rouxii. The overall fermentation process performed in this work consisted sequentially of autodigestion of soy-sauce koji $(at\;45^{\circ}C\;for\;12\;days)$, lactic acid fermentation $(at\;30^{\circ}C\;for\;14\;days\;in\;S3\;and\;S4)$, ethanol fermentation $(at\;30^{\circ}C\;for\;14\;days\;in\;S2\;and\;S4)$,and aging $(at\;25^{\circ}C\;for\;20\;days)$. At the end of the autodigestion period, the highest MCPD removal (from the initial 38.6 ppm to 1.3 ppm) was observed in the S-2. Reducing sugar contents of the S-2 and S-4 sharply decreased from the 30th day of incubation, from the initial concentration of about 5.0% to less than 0.5% at the end of the process. Total soluble nitrogen content of all the soy-sauce products slightly increased during the overall fermentating period.The level of free glutamic acid, a major amino acid that is known to determine the taste of soy-sauce was determined to be an average value of $1270{\sim}1323\;mg/100\;mL$ of soy-sauce. The results of sensory evaluation of the fermented SAHSPs show that qualities of the S-2 and S-4 samples are nearly on the same level with that of the commercially fermented soy-sauce (p<0.05). This result suggests that the fermentation process in this work, especially the process performed with S. rouxii has a good effect for removing MCPD from SAHSP and also for improving quality of the SAHSP product.