• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.787-792
• /
• 2002

The voided slab have many advantages, light weight, high load-distribution capacity, low cost and beautiful appearance, etc. But they have also many cracks due to difficulties in designs and construction, analysis, shrinkage, installation and rising force of voided tube. This paper presents the retrofit effects with steel plate(SP)/carbon fiber sheet(CFS) of RC voided slab. As a results of this study, it proved that the strip pattern has to be profitable than full-face pattern in performance such as crack, ultimate loads, stiffness. Retrofit length has many influence on retrofit effects, as the length increases, performance and stability of end blocks higher. Also, it proved that the retrofit on full-section has to be profitable than voided-section in performance, and the overlay length of CFS is desirable to extent approximately and welding(V-cut) has to be efficient than anchors in SP connection. But the kinds of end block and anchor has not influence on retrofit effects.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.3
• /
• pp.8-15
• /
• 2005

A new measuring method for tool deflection has been developed when sculptured surface is processed in ball-end milling. Since the vibration due to cutting forces has low frequencies, an electromagnetic sensor is used for measuring the exact vibration displacement. The amplitude and direction of vibration displacement during the cutting process is presented as orbital plot. In this study, it assumes that the vibration displacement is proportional to the length of cutting chip. Therefore, tool deflection is calculated by summing up the vibration displacement of unit chip length for engaged chip length. In addition, computer programs has been developed to predict the deflection of tools when machining sculptured surface. This developed program predicts the tool deflection per block of NC data, so that it can easily identify the parts which have the possibility of machining errors.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.377-377
• /
• 2006

Alkoxyamine and thiocarbonyl thio end capped polyethylene (PE) chains were synthesized using a direct and simple approach consisting in reacting di(polyethylenyl)magnesium (PE-Mg-PE) chains with a range of nitroxides and disulfides of thiocarbonyl thio compounds. PE-Mg-PE compounds were prepared by a catalyzed chain growth reaction of ethylene on nbutyloctylmagnesium (BOMg) with a neodymocene complex $(C_{5}Me_{5})_{2}NdCl_{2}Li(OEt_{2})_{2}$. Complete characterizations confirm the introduction of the desired end groups. The controlled radical polymerization (NMP and RAFT) of butyl acrylate mediated by these functional polyethylenes was successful.

• Computers and Concrete
• /
• v.1 no.3
• /
• pp.249-260
• /
• 2004

The stress transmission mechanism in pretensioned concrete beams, though very interesting from an economical point of view, is very complex, integrating various phenomenons such as sliding, bond, bursting. For long the complexity of this mechanism has led engineers to provide a massive rectangular anchorage zone at each end of the beam. The necessity of using such a concrete reinforcement is certainly unquestionable in post-tensioned beams. However in pretensioned elements the stresses induced in concrete in the anchorage zone are smaller than in post-tensioned elements. In this article the stress field in the end zone is calculated numerically and from this analysis the possible reduction of the cross-section of the anchorage block is examined.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.7
• /
• pp.1235-1240
• /
• 2008

In this paper, we presented an active RFID system in 2.45GHz range including LNA, Mixer and gain block. And in this work, a link budget model for RFID applications are proposed. We describe the detailed design and implementation of our system. Our components in RFID system has features such as low Noise Figure, reliable energy budget, and standard compliance with ISO 18000-4. Our receiver is effective for development and evaluation of prototype applications because of the flexibility of the design hardware. So, our platform will be suitable for versatile item management applications.

• Electronics and Telecommunications Trends
• /
• v.33 no.5
• /
• pp.13-23
• /
• 2018

Deep learning is a promising solution to a number of complex problems based on its inherent capability to approximate almost all types of functions without the demand for handcrafted feature extraction. New wireless transmission and access schemes based on deep learning are being increasingly proposed as substitutes for existing approaches, providing a lower complexity and better performance gain. Among such schemes, a communications system is viewed as an end-to-end autoencoder. The learning process applied in autoencoders can automatically deal with some nonlinear or unknown properties in communications systems. Deep learning can also be used to optimize each processing block for required tasks such as channel decoding, signal detection, and multiple access. On top of recent related research trends, we suggest appropriate research approaches for communications systems to adopt deep learning.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2019.05a
• /
• pp.522-524
• /
• 2019

In spite of a rapid development in the quality of built-in mobile cameras, their some physical restrictions hinder them to achieve the satisfactory results of digital single lens reflex (DSLR) cameras. In this work we propose an end-to-end deep learning method to translate ordinary images by mobile cameras into DSLR-quality photos. The method is based on the framework of generative adversarial networks (GANs) with several improvements. First, we combined the U-Net with DenseNet and connected dense block (DB) in terms of U-Net. The Dense U-Net acts as the generator in our GAN model. Then, we improved the perceptual loss by using the VGG features and pixel-wise content, which could provide stronger supervision for contrast enhancement and texture recovery.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2020.11a
• /
• pp.155-157
• /
• 2020

본 논문은 딥러닝 기반의 중첩 블록 단위 이미지 압축 방법에 대하여 제안한다. 이미지를 블록 단위로 나누어 압축을 진행하며, 그 과정에서 생길 수 있는 블록화 현상을 제거하기 위해 블록의 주변부를 압축에 이용한다. 이로 인한 추가적인 부하를 제거하기 위해 복호화에 필요한 부하 영역을 제거한 뒤, 복호화기에서 특징맵들을 병합하여, 제거한 영역에 대해 주변 블록의 정보를 사용하여 복호화를 진행한다. 압축을 진행하고자 하는 이미지의 크기에 따라 급격하게 증가하는 요구 메모리를 이미지의 크기에 상관 없이 고정된 작은 메모리로 이미지 압축을 진행할 수 있다는 장점이 있다. 실험 결과로써 4K 이미지를 통해서 복원된 화질과 메모리의 사용량을 측정한 결과, 동일한 화질을 유지함과 동시에, 기존 방법대비 약 500배 적은 메모리 사용량을 보인다.

• Annual Conference on Human and Language Technology
• /
• 2021.10a
• /
• pp.423-426
• /
• 2021

본 논문은 전역 스타일 토큰(Global Style Token)을 기준으로 하여 감정의 세기를 조절할 수 있는 방법을 소개한다. 기존의 전역 스타일 토큰 연구에서는 원하는 스타일이 포함된 참조 오디오(reference audio)을 사용하여 음성을 합성하였다. 그러나, 참조 오디오의 스타일대로만 음성합성이 가능하기 때문에 세밀한 감정 조절에 어려움이 있었다. 이 문제를 해결하기 위해 본 논문에서는 전역 스타일 토큰의 레퍼런스 인코더 부분을 잔여 블록(residual block)과 컴퓨터 비전 분야에서 사용되는 AlexNet으로 대체하였다. AlexNet은 5개의 함성곱 신경망(convolutional neural networks) 으로 구성되어 있지만, 본 논문에서는 1개의 신경망을 제외한 4개의 레이어만 사용했다. 청취 평가(Mean Opinion Score)를 통해 제시된 방법으로 감정 세기의 조절 가능성을 보여준다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.31-48
• /
• 1993

Economic background is discussed with consequences for tractor industry and tractor concepts. Particular reference is given to the question of frame chassis instead of block concept. Development trends of tractor components are analyzed for driving system (including four-wheel drive and brakes), diesel engines, transmissions, human engineering , hydraulics and implement control. Consideration is given to electronics and aspects of environmental protection as well. Expected further tractor design developments are summarized at the end of the paper.