• 한국전자파학회논문지
• /
• 제23권4호
• /
• pp.507-514
• /
• 2012

본 논문에서는 함체 내부의 PCB에 있는 트레이스 파원에 의한 함체의 공진 특성 해석법을 제안하고 있다. 함체 내부의 전자계를 계산하기 위해 PCB 트레이스에 형성되는 전류 분포 및 PCB 유전체의 경계면에서 만족하는 경계면 전계 분포에 관한 연립 적분방정식을 유도하였으며, 연립 적분방정식의 해는 Galerkin의 모멘트 법으로 구하고 있다. 그 결과, 함체의 공진 특성은 실험 결과 및 HFSS 툴에 의한 시뮬레이션 결과와도 잘 일치하고 있으며, 함체의 공진 주파수는 PCB 트레이스의 위치에 의해 달라진다는 것을 확인하고 있다. 이론 해석의 타당성을 검증하기 위해 반사 계수의 이론치를 측정치와도 비교하고 있다.

• 한국전자파학회논문지
• /
• 제20권1호
• /
• pp.60-66
• /
• 2009

본 논문은 유전체로 막힌 개구를 갖는 함체의 차폐 효과(SE)를 계산하는 해석적 방법을 제안한다. 제안된 방법은 기존의 방법으로 해석할 수 없는 유전체로 막힌 개구를 갖는 함체의 SE 해석이 가능하다. 제안된 방법의 타당성을 검증하기 위해 기존에 제시된 방법과 상용 프로그램의 SE 해석 결과를 비교 검증하였다. 제안된 방법을 이용하여 덮개 유전체의 유전율과 두께 변화, 함체 내 관측점 위치 변화, 개구의 폭과 높이 변화에 대한 SE 변화를 계산하였다.

• 대한기계학회논문집B
• /
• 제30권12호
• /
• pp.1173-1180
• /
• 2006

This study deals with fluid flow and heat transfer around a module cooled by forced air flow generated by a piezoelectric(PZT) fan in an enclosure. The fluid flows were generated by a flexible PZT fan which deflects inside a fluid transport system of comparatively simple structure mounted on a PCB in an enclosure($270\times260\times90mm^3$). Input voltages of 30V and 40V, and a resonance frequency of 28Hz were used to vibrate the cooling fan. Input power to the module was 4W. The height in an enclosure was changed 23$\sim$43mm. The fluid flow around the module was visualized by using PIV system. The temperature distributions around a heated module were visualized by using liquid crystal film. As the height in an enclosure and the input voltage of PZT fan increased, the cooling effect of module using a PZT fan increased. We found that the flow type was T- or Y-shape and the cooling effect was increased by the wake generated by a PZT fan.

• 한국전자파학회논문지
• /
• 제23권5호
• /
• pp.652-659
• /
• 2012

직사각형 슬릿 개구를 갖는 금속 함체에 수직, 수평 편파를 입사하여 차폐 효과를 연구하였다. 직사각형 슬릿개구의 magnetic polarizability와 금속 함체의 공진 모드를 이론적으로 분석하였고, 이를 바탕으로 시뮬레이션 결과와 측정 결과를 비교 분석하였다. 또한, 함체 내부 프로브의 위치에 따른 차폐 효과 의존성도 분석하였다.

• 한국전자파학회논문지
• /
• 제20권9호
• /
• pp.936-942
• /
• 2009

본 논문에서는 함체 케이스의 내부에 손실 유전체를 충진한 부공동을 설치하고 함체 케이스 내부로 공급된 전력과 반사 계수를 계산하여 함체의 공진 특성을 검토하고 있다. 이론 해석으로는 내부 전자파원의 전류 분포 및 부공동 개구면에서의 전계 분포에 관한 연립 적분방정식을 유도하고 Galerkin의 모멘트법으로 해석하였다. 이론 해석 결과, carbon을 함유한 발포 폴리스티렌을 손실 유전체로 사용하여 부공동의 크기와 carbon 함유량을 조절함으로써 함체 케이스의 공진 특성을 제어하여 함체 내부의 전자파 방사 크기를 저감시킬 수 있음을 보이고 있으며, 공급 전력의 실험치와도 비교하여 이론 해석의 타당성을 확인하고 있다.

• 대한기계학회논문집B
• /
• 제25권9호
• /
• pp.1272-1280
• /
• 2001

An experimental study has been conducted to elucidate the resonance of natural convection in a side-heated square enclosure having a mechanically oscillating bottom wall. Under consideration is the impact of the imposed oscillating frequency, amplitude and the system Rayleigh number on the fluctuation of air temperatures. The experimental results show that the magnitude of the fluctuation of air temperature is substantially augmented at a specific forcing frequency of the oscillating bottom wall. The resonant frequency is increased with the increase of the Rayleigh number and it is little affected by the amplitude of the oscillating wall. It is also found that the resonant frequency is relevant to the Brunt- V$\"{a}$iS$\"{a}$l$\"{a}$ frequency which represents the stratification degree of the system.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.23-27
• /
• 2003

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.609-614
• /
• 2000

This numerical study investigate resonance frequency of natural convection for steady state, periodic flow and chaotic flow in two-dimensional direct numerical simulations, differentially heated, vertical cavities having aspect ratios near unity. The enclosure cavity has isothermal and time dependent temperature side walls and adiabatic top/bottom walls. The aspect ratio is 1/3, 1/2, 1, 2, and 3 for the varying Rayleigh number. Resonance frequency for AR=1 has decrease as the aspect ratio and the Rayleigh number are increasing.

• Wind and Structures
• /
• 제23권2호
• /
• pp.91-107
• /
• 2016

Flow-excited acoustic resonance in ducted cavities can produce high levels of acoustic pressure that may lead to severe damage. This occurs when the flow instability over the cavity mouth, which is created by the free shear layer separation at the upstream edge, is coupled with one of the acoustic modes in the accommodating enclosure. Acoustic resonance can cause high amplitude fluctuating acoustic loads in and near the cavity. Such acoustic loads could cause damage in sensitive applications such as aircraft weapon bays. Therefore, the suppression and mitigation of these resonances are very important. Much of the work done in the past focused on the fluid-dynamic oscillation mechanism or suppressing the resonance by altering the edge condition at the shear layer separation. However, the effect of the downstream edge has received much less attention. This paper considers the effect of the impingement edge geometry on the acoustic resonance excitation and Strouhal number values of the flow instabilities in a ducted shallow cavity with an aspect ratio of 1.0. Several edges, including chamfered edges with different angles and round edges with different radii, were investigated. In addition, some downstream edges that have never been studied before, such as saw-tooth edges, spanwise cylinders, higher and lower steps, and straight and delta spoilers, are investigated. The experiments are conducted in an open-loop wind tunnel that can generate flows with a Mach number up to 0.45. The study shows that when some edge geometries, such as lower steps, chamfered, round, and saw-tooth edges, are installed downstream, they demonstrate a promising reduction in the acoustic resonance. On the other hand, higher steps and straight spoilers resulted in intensifying the acoustic resonance. In addition, the effect of edge geometry on the Strouhal number is presented.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.556-561
• /
• 2000

Comprehensive numerical computations are made of side-heated squire cavity which is exposed to time dependent external mechanical forcing. Numerical solutions are acquires to the governing two-dimensional Navier-Stokes equations for a Boussinesq fluid. Time dependent heat transfer characteristics of interior fluid are analyzed to illustrate resonance phenomenon. When system is exposed to pure sinusoidal mechanical forcing, the numerical results disclose that the basic mechanism of resonance of mechanical forcing is same as that of thermal forcing of Ref. [3, 9]. In comparatively small amplitude of mechanical forcing, thermal characteristics of the system are similar to basic system(${\varepsilon}=0$).