• Journal of Electrochemical Science and Technology
• /
• 제2권2호
• /
• pp.124-129
• /
• 2011

A simple process of fabricating micropillar structure and its influence upon enhancing electrochemical biosensor response were studied in this work. Conducting polymer PEDOT was used as a base material in formulating a composite with PVA. Micro porous PC membrane filter was used as a template for the micropillar of the composite on ITO electrode. This structure could provide plenty of encapsulating space for enzyme species. After dosing enzyme solution into this space, Nafion film tent was cast over the pillar structure to complete the micropillar cavity structure. In this way, the encapsulation of enzyme could be accomplished without any chemical modification. The amount of enzyme species was easily controllable by varying the concentration of the dosing solution. The more amount of enzyme is stored in the sensor, the higher the electrochemical response is produced. One more reason for the sensitivity improvement comes from the large surface area of the micropillar structure. Application of 0.7 V produced the best current response under the condition of pH 7.4. This biosensor showed linear response to the glucose in 0.1~1 mM range with the average sensitivity of $14.06{\mu}A/mMcm^2$. Detection limit was 0.01 mM based on S/N = 3.

• 마이크로전자및패키징학회지
• /
• 제8권4호
• /
• pp.67-72
• /
• 2001

반도체 칩 캡슐화성형시 칩 캐비티에서의 유동을 보다 엄밀하게 모델링하고 해석하기 위한 연구가 이루어졌다. 리드프레임에서의 구멍부위를 통과하는 유동의 모델링을 시도하였고 리드프레임에서의 열 경계조건을 정확하게 취급하였다. 유동의 이론적 해석을 위해 헬레쇼오 모델을 채택하였고 리드프레임에 의해 아래 위로 분리된 각각의 캐비티로 가정하여 해석하였다. 리드프레임에서 구멍부위를 통과하는 유동은 헬레쇼오 모델링시에 질량 소스(source) 항으로 삽입되었다. 유동해석 프로그램과 콤플렉스 방법에 기반을 둔 최적화 프로그램을 연계하여 미성형 방지를 위한 최적 공정조건을 성공적으로 정확하게 얻어낼 수 있었다.

• Journal of Pharmaceutical Investigation
• /
• 제32권1호
• /
• pp.41-45
• /
• 2002

The purpose of this study is to microencapsulate a highly hygroscopic drug, pyridostigmine bromide (PB), with a waterproof wall material, in order to increase the flowability of the drug particles. Polyvinylacetaldiethylaminoacetate (AEA), Eugragit E and Eugragit RS were examined as the wall materials. Microcapsules containing PB were prepared by the evaporation technique in an acetone/liquid paraffin system using aluminum tristearate as a core material, and evaluated for drug encapsulation efficiency, surface morphology, particle size and drug dissolution. The encapsulation of PB in the wall material was almost complete. Among the wall materials examined, AEA exhibited the most excellency in shape, surface texture, flowability, size distribution of microcapsules. Above results suggest that AEA would be a potential wall material for microcapsulation of highly hygroscopic drugs, such as PB. Through microencapsulation with AEA, inconvenience of handling of PB powders encountered in the process of weighing and packing the powders to tableting die or capsule body could be greatly improved.

• 마이크로전자및패키징학회지
• /
• 제28권2호
• /
• pp.1-12
• /
• 2021

3차원 인쇄 기술은 제품의 설계를 3차원으로 하여 조립없이 제품의 생산까지의 시간을 획기적으로 줄이고 복잡한 구조도 구현할 수 있어 미래의 기술로 각광받고 있다. 본 논문은 3차원 인쇄기술을 이용한 전자소자에 대한 최근 연구동향을 알아보면서 구성품, 전원공급장치와 회로에서의 연결과 3차원 인쇄기술 PCB의 응용한 연구논문들을 소개하고 있다. 3차원 인쇄기술로 제작한 전자소자는 원스톱으로 전자소자, 솔더링(soldering), 스태킹(stacking), 회로의 봉지막(encapsulation)까지 제작함으로써 생산설비의 단순화와 전자기기를 개인 맞춤형을 할 수 있는 가능성을 보여주었다.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.1
• /
• pp.301-302
• /
• 2003

With the aim of obtaining the early bone regeneration efficacy, poly (L-lactide) particulates were developed as a long-term drug carrier system.Biodegradable microparticulates have been used extensively as drug delivery devices. However, problems like poor encapsulation efficiencies of the drugs and complicated fabrication process are still remained to be solved. (omitted)

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.1
• /
• pp.299.1-299.1
• /
• 2003

Multivesicular DepoFoam technology is best suited for the encapsulation and sustained release of water-soluble drugs. The purpose of the present study was to prepare multivesicular DepoFoam particles and investigated possibility of oral delivery of a peptide, human epidermal growth factor (rhEGF). The multivesicular DepoFoam particles containing rhEGF was prepared by a two step water-in-oil-in-water double emulsification process. (omitted)

• 한국세라믹학회지
• /
• 제36권7호
• /
• pp.725-733
• /
• 1999

It is a fundamental experiment to use blast-furnace slag in solidification/stabilization process. The compressive strength and leaching test of Pb and Cr doped samples were evaluated and the effects of heavy-metal ions on the hydration of slag was investigated. Sodium silicates(5wt%) was added as alkali-activator and the effects of replacing a part of slag with flyash or gypsum was also discussed. Pb ion was solidified by encapsulation of matrix. In of slag${\pm}$gypsum binder microstructure was densified by accelerating to form AFt/AFm phase and compressive strength was improved resulting in reducing leaching amount of Pb ion. Cr ion was solidified by substituting with Al ion in aluminate product. Slag+fly ash binder improved compressive strength and decreased leaching amount of Cr ion.

• 한국전기전자재료학회논문지
• /
• 제23권5호
• /
• pp.397-402
• /
• 2010

In this paper, we studied WVTR(water vapor transmission rate) properties of $Si_3N_4$ thin film that was deposited using TCP-CVD (transformer coupled plasma chemical vapor deposition) method for the possibility of OLED(organic light emitting diode) encapsulation. Considering the conventional OLED processing temperature limit of below $80^{\circ}C$, the $Si_3N_4$ thin films were deposited at room temperature. The $Si_3N_4$ thin films were prepared with the process conditions: $SiH_4$ and $N_2$, as reactive gases; working pressure below 15 mTorr; RF power for TCP below 500 W. Through MOCON test for WVTR, we analyzed water vapor permeation per day. We obtained that WVTR property below 6~0.05 gm/$m^2$/day at process conditions. The best preparation condition for $Si_3N_4$ thin film to get the best WVTR property of 0.05 gm/$m^2$/day were $SiH_4:N_2$ gas flow rate of 10:200 sccm, working pressure of 10 mTorr, working distance of 70 mm, TCP power of 500 W and film thickness of 200 nm. respectively. The proposed results indicates that the $Si_3N_4$ thin film could replace metal or glass as encapsulation for flexible OLED.

• Journal of Microbiology and Biotechnology
• /
• 제29권5호
• /
• pp.721-730
• /
• 2019

The probiotic Lactobacillus acidophilus KBL409 was encapsulated with alginate (Al) and alginate-chitosan (Al/Chi) through extrusion method. The sizes and zeta potentials of microspheres were measured to confirm encapsulation. To evaluate the protective effect of microspheres against gastrointestinal fluids, all the samples were exposed to simulated gastric fluids (SGFs, pH 1.5) at $37^{\circ}C$ for 1 or 2 h, followed by incubation with simulated intestinal fluids (SIFs, pH 6.5) for 2 h. The mucoadhesive ability of microspheres was evaluated using the intestinal epithelial cell line HT29-MTX. To extend the shelf-life of probiotics, lyoprotectants such as disaccharide and polysaccharide were mixed with free or encapsulated cells during the freeze-drying process. The size of the microspheres demonstrated a narrow distribution, while the zeta potentials of Al and Al/Chi-microspheres were $-17.9{\pm}2.3$ and $20.4{\pm}2.6mV$, respectively. Among all the samples, Al/Chi-encapsulated cells showed the highest survival rate even after exposure to SGF and SIF. The mucoadhesive abilities of Al and Al/Chi-microspheres were higher than 94%, whereas the free L. acidophilus showed 88.1% mucoadhesion. Ten percent of sucrose showed over 80% survival rate in free or encapsulated cells. Therefore, L. acidophilus encapsulated with Al and Al/Chi-microspheres showed higher survival rates after exposure to the gastrointestinal tract and better mucoadhesive abilities than the free cells. Also, sucrose showed the highest protective effect of L. acidophilus during the freeze-drying process.

• Food Science and Biotechnology
• /
• 제18권1호
• /
• pp.185-189
• /
• 2009

Microencapsulation of flavor was carried out by molecular inclusion process using $\beta$-cyclodextrin (${\beta}CD$). ${\beta}CD$-flavor complex was prepared at various flavor-to-${\beta}CD$ ratios (1:6-1:12) to determine the effect of ${\beta}CD$ concentration on the inclusion efficiency. Maximum total oil retention and minimal surface oil content were obtained at flavors to ${\beta}CD$ ratio of 1:10. The physical properties and controlled release pattern of flavors from ${\beta}CD$-flavor complex were measured and compared with spray-dried microcapsules prepared using carbohydrate wall system. ${\beta}CD$-flavor complex showed higher total oil retention and surface oil contents, smaller mean particle size, lower moisture uptake, and higher oxidation stability than spray-dried microcapsule. Oxidative stability of flavor was correlated with hygroscopicity of wall materials. The controlled release mechanism was highly affected by temperature and characteristics of wall materials.