• Applied Biological Chemistry
• /
• v.35 no.6
• /
• pp.457-461
• /
• 1992

The emulsion stabilizing properties of soy protein isolate (SPI) were investigated in terms of the protein and oil concentration. Particularly, the dependence of emulsion stability on the oil particle size and viscosity of emulsion was studied in conjunction with the adsorption pattern of protein onto the water/oil interface during emulsification. The data showed that increasing protein concentration decreased the oil particle size and increased the emulsion viscosity, resulting in the enhanced emulsion stability. In contrast, increasing oil concentration increased both the oil praticle size and the emulsion viscosity, and thus emulsion stability varied depending on which factor predominated the overall emulsion system.

• Macromolecular Research
• /
• v.17 no.12
• /
• pp.943-949
• /
• 2009

A highly dispersed W/O emulsion of silicone oil (cyclomethicone)/water system was prepared with a nonionic surfactant. The surface and interfacial tension between the oil and water were characterized in terms of the droplet size distribution and viscosity change of the emulsion. When the dispersed phase concentration was relatively high, the viscosity of the emulsion was rapidly increased and the droplet size of the emulsion was decreased. The rheological behavior of the emulsion system showed non-Newtonian and shear thinning phenomena depending upon the content of the dispersed phase. The droplet size of the emulsion was decreased with increasing surfactant content and water concentration. The relative viscosity of the emulsion was better predicted with the Choi-Schowalter model than with the Taylor model. The value of the complex modulus increased with increasing surfactant concentration. The linear viscoelastic region was expanded with a dispersed phase concentration. According to the change in the viscosity, the behavior was classified into three distinct regions: [I] linear viscoelastic, [II] partially viscoelastic, and [III] viscous. The creep/recovery behaviors in each region were characterized.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.35 no.2
• /
• pp.79-89
• /
• 2009

The objective of this study was to find out the stable formulation of nano-emulsion containing high concentration of quercetin and to investigate the effect of an ethanol on the nano-emulsion prepared by POE (30) hydrogenated castor oil (HCO-30)/oil/quercetin/ethanol/water system. Nano-emulsion was prepared using emulsion inversion point (EIP) method as low-energy method plus homogenizer as high-energy method. To evaluate effect of ethanol and other components on the nano-emulsion, physical properties such as droplet size, morphology, and size distribution were determined. The optimal quercetin concentration was 0.2 % on the nano-emulsion. The droplet diameter was below 300 nm at the HCO-30 concentration below 2.00 %. Nano-emmulsion containing 4.75 % HCO-30 was the most stable and its mean droplet size was 172.40 nm. Finally, the size of nano-emulsion containing 4.00 % ethanol was 128.15 nm and size distribution was also narrow. The results showed that the breakdown process of this nano-emulsion could be attributed to Ostwald ripening. This study about effect of ethanol on the nano-emulsion showed that loading capacity of drug could be increased by using a small amount of ethanol. As prepared stable nano-emulsion, this study showed that these results could be applied to pharmaceutics, cosmetic including skin-care products, perfume and etc.

• Journal of the Korean Applied Science and Technology
• /
• v.21 no.4
• /
• pp.370-379
• /
• 2004

Highly crosslinked micron-size monodispersed PMMA/PDVB and PS/PDVB particles were prepared using seeded multi-stage emulsion polymerization. PMMA and PS seed particles were synthesized by seeded multi-stage emulsion polymerization and soap-free emulsion polymerization. Then PMMA/PDVB and PS/PDVB particles were obtained using semi-batch type emulsion polymerized using divinyl benzene as a cross-linkable monomer in the presence of seed particles. PMMA particles with size of ca. 730 nm and polydispersity of 1.03 were successfully prepared in this experiment. PS particles with size of ca. 1.5 ${\mu}m$ and polydispersity of 1.01 were prepared in this experiment. Highly crosslinked PS/PDVB particles with size of ca. 1.3 ${\mu}m$ and polydispersity of 1.00 were obtained.

• Journal of Environmental Science International
• /
• v.8 no.1
• /
• pp.61-67
• /
• 1999

Silicone oil has organic and inorganic properties, and its skeleton is polysiloxane bonding that silicon is bonded hydrogen or organic group. Silicone compounds are very smooth and lubricant properties by low surface tension, low temperature dependence, and nonadhesive properties. Because of these properties, silicone compounds are used as many parts of chemicals, softener, smooth and libricant agents, water-repellent agent, and defoaming agent, etc. Emulsion was prepared with the inversion emulsification method which adopted the agent-in-oil method dissolving the polyoxyethylene(7) tridecyl ether(HLB 12.2) into methoxy terminated poly(dimethyl-co-methyl amino) siloxane and hydroxy terminated poly(dimethyl-co-methyl amino) siloxane in water. At this time, processed emulsion was almost microemulsion. When ratio of emulsifier increases, emulsion is stable bacuause microemulsion is solubilized by emulsion drop size and zeta-potential are decreased. But, when amount of electrolyte is increase, emulsion became unstable because emulsion drop size is increased.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.4
• /
• pp.779-789
• /
• 2013

This study aimed to investigate the emulsifying properties of bovine lactoferrin in food emulsion system. First, lactoferrin solution was prepared to study its surface activities, such as surface adsorption characteristics and ${\zeta}$-potential. Second, some physicochemical properties of lactoferrin emulsion which resulted from variations of environmental conditions (i.e., pH or NaCl addition) were determined. As for surface adsorption characteristics evaluated by surface tension, it was decreased with increasing lactoferrin concentration in solution ($1{\times}10^{-5}{\rightarrow}0.2wt%$) and showed a plateau (${\fallingdotseq}44$mN/m) above 0.01 wt%. It was also changed with pH and the minimum value of 53.8 mM/m was observed at pI of lactoferrin. This was related to changes in ${\zeta}$-potential of the lactoferrin solution with respect to pH. Fat globule size of lactoferrin emulsion was decreased with increasing lactoferrin concentration and a stable emulsion was formed above 0.5 wt% lactoferrin in emulsion with fat globule size $d_{32}$ of ca. 0.33 ${\mu}m$ as confirmed by creaming stability experiment (i.e., Turbiscan). As with surface tension, fat globule size of lactoferrin emulsion also changed with pH and showed a maximum value at pI. As evaluated by Turbiscan, in the presence of NaCl, the lactoferrin emulsion showed instability in particular above 10 mM.

• Journal of the Korean Applied Science and Technology
• /
• v.23 no.1
• /
• pp.1-11
• /
• 2006

The W/O emulsion was formed by mixing hydrophobic nonion surfactants of span 80 and tween 60 with kerosine, and by adding sodium silicate aqueous solution. Precipitating the W/O emulsion by sodium bicarbonate resulted in spherical silica particles. Shape and size distribution of silica particles were observed. The particles were spherical and they have narrow size distribution. Particle sizes were 9.29, 7.39 and $5.73\;{\mu}m$ at homogenizer speed of 2500, 3000, and 3500 rpm, respectively. The particle size was decreased by increasing agitation speed due to the formation of emulsion droplet. At fixed agitation speed, absorbed paraffin oil weight were measured and the $SiO_2/Na_2O$ mole ratio effects on particle size were investigated. Particle size was decreased by increasing the mole ratio of $SiO_2/Na_2O$.

• Particle and aerosol research
• /
• v.13 no.3
• /
• pp.133-139
• /
• 2017

In this paper, we proposed an emulsification method without using an emulsifier and investigated the effects of particle size distribution in fluids on dispersion stability. Surfactant-free oil in water emulsion was prepared with 1 % (w/w) of olive oil by using high speed agitation, high pressure and ultrasonic dispersion methods. The particle size, microscopic observation, and dispersion stability of each sample were evaluated and dispersion stability according to various dispersion methods was compared. As a result, the emulsion dispersed by the ultrasonic dispersion method showed the smallest particle size and uniform distribution of $0.07{\sim} 0.3{\mu}m$ and was the most stable in a 7 days stability evaluation. In the above experiment, four olive oil emulsions having different particle sizes were prepared using ultrasonic dispersion technology that was capable of producing stable emulsions. The dispersion stability of each samples with oil droplet sizes of (A) 0.1 to $0.5{\mu}m$, (B) 0.3 to $4{\mu}m$, (C) 1 to $10.5{\mu}m$ and (D) 2 to $120{\mu}m$, was observed for 7 days, and the relationship between the stability and performance was studied. Emulsion (A) with particle size less than $0.5{\mu}m$ displayed the dispersion stability showing below 5 % change in a 7 days stability evaluation. In the case of (B), (C), and (D) that had larger particle than $0.5{\mu}m$, the changes of dispersion stability were 10 %, 13 % and 35 % respectively. From these results, it was proved that dispersion stability of emulsion with uniform particle size of $0.5{\mu}m$ or less was confirmed to be very stable.

• Journal of Industrial and Engineering Chemistry
• /
• v.67
• /
• pp.123-131
• /
• 2018

Using mixed nonionic surfactants Span/Tween, we investigated the effects of HLB value on the O/W emulsion stability and rheological behaviors. In this study, MS-01 (Span 60 & Tween 60) and MS-02 (Span 80 & Tween 80) was used as mixed nonionic surfactants. We considered required HLB value 10.85 and selected corresponding HLB value range 8-13. The droplet size distributions, droplet morphology, rheological properties, zeta-potential and creaming index of the emulsion samples were obtained to understand the mechanism and interaction of droplets in O/W emulsion. The results indicated that optimal HLB number for O/W emulsions was 10.8 and 10.7, while using MS-01 surfactant and MS-02 surfactant respectively. MS-01 (HLB = 10.8) sample and MS-02 (HLB = 10.7) sample showed smallest droplet size and highest zeta-potential value. Rheological properties are measured to understand rheological behaviors of emulsion samples. All emulsion samples showed no phase separation until 30 days storage time at $25^{\circ}C$.

• Applied Chemistry for Engineering
• /
• v.17 no.2
• /
• pp.132-137
• /
• 2006

Polyurethane acrylate hybrid emulsions were prepared by seeded polymerization techniques. In the synthesis, seeded polyurethane dispersion containing a carboxylic group was used to endow hydrophilicity to the hybrid emulsion and various acrylates such as methyl methacrylate (MMA), 2-hydroxy ethylmethacrylate (2-HEMA), n-butyl acrylate (n-BA) and acrylic acid (AAc) were used to endow hydrophobicity. The particle size and distribution of various emulsion particles such as polyurethane acrylate hybrid emulsion, polyurethane dispersion homopolymer, acrylate emulsion, and physical blending emulsion were measured by a particle size analyzer. The average particle size of hybrid emulsion was greater than physical blending emulsion. And tensile strength, 100% modulus, elongation, and swelling properties of the polyurethane acrylate hybrid emulsion were studied and compared with those of polyurethane homopolymer, acrylate emulsion, and physically blended compositor, respectively. To improve chemical and physical resistance, this paper review a melamine hardener and compares it for effects on the physical properties of cured coating.