• KSBB Journal
• /
• 제13권3호
• /
• pp.284-288
• /
• 1998

Production of inulo-oligosaccharides from inulin was carried out with the maximum yield of 94% using a purified endoinulinase from Aspergillus ficcum. The optimum reaction temperature and pH were 55-60$^{\circ}C$ and pH 5.5-6.0, respectively. The Michaelis constant and maximum reaction velocity of the endoinuinase for inulin were 13.27 g/L and 0.13 g/L$.$min at 55$^{\circ}C$, pH 5.5, respectively. Inulin source had no significant effect on oligosaccharide yield and product composition, although initial production rate differed according to inulin origins. The reaction pH was a critical factor in inulo-oligosaccharide production because considerable free monosaccharides were released, decreasing oligosaccharide yield at low pH conditions. An empirical relationship describing the reaction performance was developed from kinetic data: the time to reach maximum oligosaccharide yield (tw) as a function of initial concentration of inulin (lo) and enzyme (Eo); i.e., log tM = -1.025 log Eo - 0.011 l0 + 2.655.

• 한국해양공학회지
• /
• 제32권2호
• /
• pp.123-130
• /
• 2018

The present study investigated the validity of an equilibrium shoreline empirical formula for real phenomena. Among three types of equilibrium shoreline formulas, Hsu's parabolic type static formula was employed, which is well-known and the most practical for shoreline estimation after coastal or harbor structure construction. The wave data observed at Maengbang beach and the CERC formula on longshore sediment transport were used in the present investigation. A comparison study was only conducted for the case of a shoreline change after the construction of a groyne. Reasonable agreement was seen between the observed wave data and the data obtained under a wave angle spreading function S = 3.5. However, significant changes were observed when S increased. Thus, careful application is required when using Hsu's formula.

• 응용통계연구
• /
• 제24권6호
• /
• pp.1021-1031
• /
• 2011

주가연계증권(ELS)은 주가와 연동되어 수익률이 결정되는 금융상품으로 현재 증권회사뿐만 아니라 은행에서도 많이 판매되고 있는 간접투자상품이다. 이 논문에서는 수익다이어그램을 통해 대표적인 주가연계증권의 수익구조를 알아보며 특히 현재 가장 많이 판매되고 있는 원금비보장 상품인 스텝다운형에 관심을 가진다. KOSPI 200과 홍콩 HSI를 기초자산으로 설정한 스텝다운형 상품에서 투자시점의 시계열 특성에 따른 조기상환여부와 경험적 분포를 이용한 VaR를 통한 위험률에 대해 고찰해 본다.

• 한국위성정보통신학회논문지
• /
• 제11권1호
• /
• pp.26-31
• /
• 2016

본 논문에서는 이기종 통신 시스템에서 Empirical Mode Decomposition(EMD) 기법을 활용하여 통신 신호의 잡음을 완화시키는 방안을 제시하였다. EMD는 노이즈가 인가된 신호를 여러 개의 Intrinsic Mode Function(IMF)로 분할하여 노이즈가 포함된 IMF를 제거하는 방법으로 노이즈를 줄이는 방법이다. 본 논문에서는 EMD의 연산량을 줄이기 위해 새로운 반복 중지 규칙을 제시하였다. EMD의 적용 방법을 수식 및 알고리즘으로 구현하였다. 3종류의 잡음이 인가된 신호를 시뮬레이션을 통해 효과적으로 잡음이 완화되는 것을 확인하였다.

• Journal of Information Display
• /
• 제13권1호
• /
• pp.37-42
• /
• 2012

An empirical functional form was suggested for the analysis of the emission spectrum of high-power light-emitting diode (LED) consisting of a sharp blue peak from the LED chips and a broad yellow peak from the phosphor layer. The peak positions, half widths, shape parameters, and amplitudes of these two peaks were reliably obtained as a function of the temperature, and the results were discussed qualitatively in relation with the junction temperature. The adoption of an inert liquid was found to have significantly reduced the LED temperature and the color shift of the emitted light. The phenomenological approach used in this study may be helpful in the simulation of the LED spectrum under various thermal conditions, and may thus be helpful in the improvement of the device performance.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.887-892
• /
• 2003

A front-end cooling fan is designed and tested in the present study. The design technique is developed using the one-dimensional inviscid flow through the fan blade, the empirical equations, and the experimental correlations. Design data for the blade can be obtained for a given flow rate and a pressure rise. A parabolic function is used to generate a sweep of the fan. Characteristics of the blade geometry are discussed between the huh and the tip. The fan is tested in the fan test unit. The measured volume flow rate at the operating point is in good agreement with that of the design specifications. Sound pressure levels of the noise are predicted with the Ffowcs Williams-Hawkings equations. Calculation results of the sound pressure level(SPL) 1m away from the fan are obtained and cpmpared with the measured data.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2007년도 가을 학술발표논문집 Vol.34 No.2 (C)
• /
• pp.433-438
• /
• 2007

This paper presents a distance mapping-based localization method with incomplete data which means partially observed data. We make three contributions. First, we propose the use of Multi Dimensional Scaling (MDS) for multi-robot localization. Second, we formulate the problem to accomodate partial observations common in multi-robot settings. We solve the resulting optimization problem using #Scaling by Majorizing a Complicated function (SMACOF)#, a popular algorithm fur iterative MDS. Third, we not only verify the performance of MDS-based multi-robot localization by computer simulations, but also implement a real world localization of multi-robot team. Using extensive empirical results, we show that the accuracy of the proposed method is almost similar to that of Monte Carlo Localization(MCL).

• Nuclear Engineering and Technology
• /
• 제51권5호
• /
• pp.1261-1271
• /
• 2019

Droplet size and distribution are important parameters determining venturi scrubber performance. In this paper, we proposed physical models for a maximum stable droplet size prediction and upper limit log-normal (ULLN) distribution parameters. For the proposed maximum stable droplet size prediction model, a Eulerian-Lagrangian framework and a Reitz-Diwakar breakup model are solved simultaneously using CFD calculations to reflect the effect of multistage breakup and droplet acceleration. Then, two ULLN distribution parameters are suggested through best fitting the previously published experimental data. Results show that the proposed approach provides better predictions of maximum stable droplet diameter and Sauter mean diameter compared to existing simple empirical correlations including Boll, Nukiyama and Tanasawa. For more practical purpose, we developed the simple, one dimensional (1-D) calculation of Sauter mean diameter.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.699-710
• /
• 2020

Pitting corrosion commonly shaped in hull structure due to marine corrosive environment seriously causes the deterioration of structural performance. This paper deals with the ultimate strength behaviors of stiffened ship panels damaged by the pits subjected to uniaxial compression. A series of no-linear finite element analyses are carried out for three stiffened panels using ABAQUS software. Influences of the investigated typical parameters of pit degree (DOP), depth, location and distribution on the ultimate strength strength are discussed in detail. It is found that the ultimate strength is significantly reduced with increasing the DOP and pit depth and severely affected by the distribution. In addition, the pits including their distributions on the web have a slight effect on the ultimate strength. Compared with regular distribution, random one on the panel result in a change of collapse mode. Finally, an empirical formula as a function of corrosion volume loss is proposed for predicting the ultimate strength of stiffened panel.

• Journal of the Korean Data and Information Science Society
• /
• 제26권3호
• /
• pp.593-610
• /
• 2015

적응 기각 추출 (adaptive rejection sampling)방법은 특정한 형태의 확률분포로 부터 확률표본을 추출하기 위한 대표적인 난수생성기 (random number generator)로서, 추출된 표본으로부터 제안분포 (proposal distribution)가 개선이 되는 장점을 가지고 있다. 그러나, 기존에 제안된 적응기각추출 방법은 확률분포의 형태가 로그-오목 함수 (log-concave function)인 경우에만 사용이 가능하기 때문에 적용범위가 제한적이다. 최근의 연구결과에서는, 이러한 단점을 보완하기 위해 다양한 형태의 적응기각추출이 진행되고 있으며, 이에 본 논문에서는 기존의 적응기각추출 방법을 포함한 총 5가지의 난수 생성 방법에 대해서 고찰하고, 아울러 모의실험을 통해 각 방법들간의 성능에 대하여, 적합성과 효율성의 관점에서 실증적으로 비교 분석하도록 한다.