• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.504-507
• /
• 2011

3D graphic softwares have brought design spaces beyond the limitations of Euclidean space. Moreover, as computational geometry has been considered together with algorithms, generative algorithms are being evolved. Recently 3D graphic softwares with the embedded generative algorithms allow designers to design free form curves and surfaces in a systematic way. While architectural design has been greatly affected by the advancement of 3D graphic technology, such attention has not given in the realm of structural design. Grasshopper is a platform in Rhino to deal with these Generative Algorithms and Associative modelling techniques. This study has tried to develop a module for preliminary structural configuration using Rhino with Grasshopper. To verify the proposed concept in this study, a module for designing a basic type of suspension structure is introduced.

• 연구논문집
• /
• s.30
• /
• pp.129-135
• /
• 2000

Double boss type composite pressure bottles have been developed widely but single boss type had not because there are some difficulty in technical point. In this paper a research was performed to develop composite pressure vessel in conjunction with design, fabrication, and test. Fiber pattern and angles were decided by CADFIL software and they are [liner/$15^{\circ}$/$15^{\circ}$/$90^{\circ}$/$18^{\circ}$/$90^{\circ}$/$21^{\circ}$/$21^{\circ}$/$90^{\circ}$]. Fabrication of bottles was done by AEA's 5-axis filament winding machine. During fabrication fiber optic sensor were embedded to measure were behavior of structure at the applied internal pressure. Even though satisfied test results were not obtained, the experimental set-up of fiber optics showed the possibility for the application of filament wound vessels. However, the conventional strain and fabrication of single boss composite bottles.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1994.03a
• /
• pp.7-34
• /
• 1994

;Recently the sheet forming simulation technology revealed great progress in the sense of practical application in the automotive, electric/electronics and aviation/space industries. The goal of sheet forming simulation is to embedded in the design engineering system which is consisted by the analysis and synthesis modules. This design simulation system predicts the slackness of sheet and estimate the formability, and search the optimum material/forming/structure conditions. This OVER-ALL OPTIMUM DESIGN can be classified as follow; 1. ANALYZING PROCEDURE: Numerical simulation based on nonlinear theories -geometry, material and friction nonlinearities- 2. OPTIMIZATION PROCEDURE: Optimum design based on mathematical programing and AI technologies, those are implemented in CAD/CAM/CAE System - Concurrent Engineering System-. In this paper, four subjects will be discussed; (1) State of arts of computer simulation technologies in Japan. (2)History of sheet forming simulation. (3) Benchmark problems. (4) Future technology in the sheet forming simulation.ation.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1218-1219
• /
• 2006

The shrinkage variation of Low Temperature Cofired Ceramics(LTCC) limits the size of the substrates that impose limitations on embedded passive components. This paper focuses on the method of minimizing or controlling planar shrinkage and reducing distortion during firing. The laminated sheets of alumina and glass were sintered at varying temperature, and depending on the amount of the glass ceramics. When the sintered of multi-layer structure with $Al_2O_3/Glass/Al_2O_3$, the glass infiltrated entirely into $Al_2O_3$ layer at the temperature of about $950^{\circ}C$ or higher.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.1023-1024
• /
• 2006

The present study purposed to design a system that enables the selection and the operation of OPC systems actively while allowing the use of legacy systems as they are. In addition, this study will design a standardized structure of information collected when using OPC protocol and, for this, use not only OPC-DA but also OPC-XMLDA to integrate data.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.5
• /
• pp.303-313
• /
• 2005

This paper proposes a generalized NURBS model, called Volumetric NURBS or VNURBS for representing volumetric objects with multiple attributes embedded in multidimensional space. This model provides a mathematical framework for modeling complex structure of heterogeneous objects and analyzing inside of objects to discover features that are directly inaccessible, for deeper understanding of complex field configurations. The defining procedure of VNURBS, which explains two directional extensions of NURBS, shows VNURBS is a generalized volume function not depending on the domain and its range dimensionality. And the recursive a1gorithm for VNURBS derivatives is described as a computational basis for efficient and robust volume modeling. In addition, the specialized versions of VNURBS demonstrate that VNURBS is applicable to various applications such as geometric modeling, volume rendering, and physical field modeling.

• Journal of electromagnetic engineering and science
• /
• v.10 no.4
• /
• pp.206-211
• /
• 2010

In this paper, an implantable planar inverted-F antenna (PIFA) for an artificial cardiac pacemaker is proposed. The antenna has a simple structure with a low profile and is placed on the top side of the pacemaker. The dimensions of the pacemaker system, including the antenna element, are $42{\times}43.6{\times}11$ mm. When the antenna is embedded in pig tissue, its $S_{11}$ value is -10.94 dB at 403 MHz and the -10 dB impedance bandwidth of the antenna is 6 MHz (399~406 MHz). The proposed PIFA in tissue has a peak gain of -20.19 dBi and a radiation efficiency of 1.12 % at 403 MHz. When the proposed antenna is placed in a flat phantom, its specific absorption ratio (SAR) value is 0.038 W/kg (1 g tissue). Performances of the proposed PIFA is sufficient to operate at the MICS band (402 ~ 405 MHz).

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.475-482
• /
• 2002

Optical fibre sensors have shown a potential to serve real time health monitoring of Slope and structure. They can be easily embedded or attached to the structures and are not affected by the electro-magnetic field. Furthermore, they have the flexibility of the sensor size and very highly sensitive. In this study, we conducted several laboratory on slope and field tests using a novel optical sensor based on Brillouin scattering and PVC pipe. One of the advantages of this technique is that the bare fibre itself acts as sensing element without any special fibre processing or preparation. Test results have shown that BOTDR can be a great solution for sensor systems of Slope.

• Journal of information and communication convergence engineering
• /
• v.13 no.1
• /
• pp.27-35
• /
• 2015

Multiprecision multiplication is the most expensive operation in public key-based cryptography. Therefore, many multiplication methods have been studied intensively for several decades. In Workshop on Cryptographic Hardware and Embedded Systems 2011 (CHES2011), a novel multiplication method called 'operand caching' was proposed. This method reduces the number of required load instructions by caching the operands. However, it does not provide full operand caching when changing the row of partial products. To overcome this problem, a novel method, that is, 'consecutive operand caching' was proposed in Workshop on Information Security Applications 2012 (WISA2012). It divides a multiplication structure into partial products and reconstructs them to share common operands between previous and next partial products. However, there is still room for improvement; therefore, we propose a finely designed operand-caching mode to minimize useless memory accesses when the first row is changed. Finally, we reduce the number of memory access instructions and boost the speed of the overall multiprecision multiplication for public key cryptography.

• Journal of information and communication convergence engineering
• /
• v.8 no.4
• /
• pp.461-465
• /
• 2010

This paper describes the design method of Time-to-Digital Converter(TDC) to obtain the constant delay time and good reliability. The reliability property is described with delay elements. In TDC the time signal is converted to digital value which is based on delay elements for the time interpolation. To obtain the constant delay time, the first and the last delay elements have different structure compared to the middle delay elements. In the first and the last delay elements, the driving ability could be controlled for the different delay time. The delay element can be designed by analog and digital devices. The delay time of the element using analog devices is not sensitive to process parameters than that of the element using digital devices. And the TDC circuit by the elements using analog devices shows better reliability than that by the elements using digital devices also.